2E SoundXDrum TWS MP3 Wireless Waterproof User Manual
- June 13, 2024
- 2E
Table of Contents
2E SoundXDrum TWS MP3 Wireless Waterproof User Manual
IN THE BOX
2E SoundXDrum
USB-C charging cable
User guide
PRODUCT ILLUSTRATION
CHARGING
Note:
| LED indicator | Battery status |
|---|---|
| Flashing red | Low battery (<20%) |
| Solid red | Charging |
| Power indicator turns off | Fully charged |
- Please fully charge the built-in battery before the first use.
- When the battery is less than 10% power remaining, the speaker will power off automatically.
BUTTONS OVERVIEW
Power button
| **** | Press and hold itfor2s | Power on | White light on |
|---|---|---|---|
| Power off | Al LED indicators off |
Power button
| Short press once| Switching light patterns
---|---|---
Volume button
| Short press| Volume up
---|---|---
Press and hold it for 2s| Next track
| Short press| Volume down
Press and hold it for 2s| Previous track
Multifunctional Button (MFB)
| Music mode | Short press | Play/pause |
|---|---|---|
| Press and hold it for 2s | Activate Siri | |
| Conversation mode | Short press | Answer phone call |
| Press and hold it for 2s | Reject phone call | |
| Short press | End outgoing call |
Bluetooth button
| Short press| Enters pairing mode
---|---|---
Press and hold it for 3s| Host enters to True Wireless Stereopairing mode
PAIRING MODE
- When powered on, the speaker automatically reconnects to the previously connected device.
- Go to Bluetooth settings on your mobile device, then search and select «2E SoundXDrum» from devices list.
- Once paired, the Bluetooth indicator will turn solid blue.
Note:
- Make sure that the speaker is within 10 meters from your mobile device.
- When powered on, the speaker will automatically reconnect to the last connected device.
True wireless stereo connection
Speaker A
Speaker B
-
Press and hold the Bluetooth button for 3s to enter into True Wireless Stereo pairing mode as the host.
-
Enable the Bluetooth on your device and connect to «2E SoundXDrum», the stereo sound will play from both speakers.
Speaker A
Speaker B -
0nce paired, the main speaker blue indicator light is always on.
Speaker A
Speaker B
Factory reset and reconnect
- If this speaker becomes disconnected o has another connecting problem, you can press and hold «Bluetooth» buttons simultaneously for 10s at least to clear the pairing of speaker and remove the old pairing in your Bluetooth device, and then pair again.
- 1f this speaker becomes out of control and can’t be powered off, you can press and hold the play button for 10s at least to reboot.
SPESIFICATIONS
| SKU | 2E-BSSXDWBK |
|---|---|
| Bluetooth Version | 5.0 |
| Frequency Response | 70 Hz-20 kHz |
| Battery Type | 3.7 V / 8000 mAh |
| Charging Time | up to 5 Hours, 5V/2A |
| Waterproof | IPX7 |
| Dimensions | 110 x 110x 168 mm |
| Frequency band | 2402 – 2480 MHz |
| Maximum transmission power | -6 – 4 dBm |
WARNINGS
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- Do not disassemble or repair the device by yourself. Service and repairs should only be done by qualified service staff.
- Avoid foreign objects and substances into the openings of the device.
- Avoid high temperatures: do not install the device near heating devices and avoid exposure to direct sunlight.
- Do not use aggressive solvents to clean the device. Use a soft dry cloth for cleaning.
- If the device is damaged or does not work properly, immediately switch a speaker off and stop using it.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>