JABBA 7199-32 Bluetooth Speaker Instructions
- June 3, 2024
- JABBA
Table of Contents
7199-32 Bluetooth Speaker
Instructions
BLUETOOTH SPEAKER MANUAL
7199-32, 7199-32
INSTRUCTIONS
- Switch “OFF/ON” for power off when “OFF” and power on when “ON”
- The Bluetooth pairing name of the speaker is “Jabba”
- Press momentarily,it turns to next song
- Press and hold it to volume up
- Press momentarily, it turns to previous song
- Press and hold it to volume down
- Press momentarily for music pause or play,When hand-free Phone call, press for answer or hang up phone call, press and hold 3 seconds to reject the incoming call.Under Bluetooth but without incoming call, Short press twice quickly to redial the last phone call.
- Press to disconnect existing Bluetooth connection and search new device
BASIC FEATURES
- Bluetooth play
- Support PC/ iPhone / iPad / Mp3 / Mp4 / and another smartphone And tablet by connecting with 3.5 mm jack (not included)
- Support Bluetooth Hand Free Phone call
TROUBLE SHOOTING
- No audio input when connecting with other devices:Press disconnect existing Bluetooth connection and search new device or shut down to reboot it
- Cannot turn on the speaker. check if the speaker does not have power, If no power ,charge it first
- Cannot connect with Bluetooth devices :check if speaker connected with the third Bluetooth device,if yes,disconnect it first,if still can not connect,reboot it and try again
DATA TRANSFERRING/CHARGING VIA USB CABLE
- Switch ON,and connect it with the PC via USB cable.it will play songs during charging
- Switch OFF,and connect it with PC for charging only
- USB cable is not for the use of data transferring
SPECIFICATIONS
- Built-in Li-ion Battery,3.7V/500mAh
- USB charging: 5V/400mA
- Speaker.4 ohm 3W
- Frequency Range:180Hz-20KHz
- SIN: 280DB
- Distortion <0.5%
INTERFACES
- 3.5mm Audio input
- USB port: power Charging
- LED indicator:
- Red/Blue flash: Power On
- Red:charging status (red indicator off when Fully charged)
CAUTIONS
- Keep out of reach of children
- Never knock the speaker
- Keep it away from fire, water,high and low temperature
- Never block speakers nets
- Never open it by yourself
- Do not charge it for too long time in case of damage to the battery, 3 hours is the best charging time
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Warning: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Statement
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Warning: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Statement
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
FCC ID: 2ABHA0117
www.fsc.org
MIX
Paper from responsible sources
170910
FSC” C170910
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>