EXTSUD 90×210 Magnetic Screen Door Installation Guide
- June 15, 2024
- EXTSUD
Table of Contents
Magnetic Screen Door
KEEP FRESH AIR AND BUGS OUT
Installation :
- Lay your curtain flat on the floor withmagnets aligned.
- Stick the velcro tape along the frame of the curtain.
- Clean the door frame and make sure it is dry.
- Mount on the edge of the door frame and install properly.
- Peel off the adhesive tape backing and install startina from the too.
- The central part of the screen door should be slightly higher than the two sides.
- Peel the backing off of the two sides and stick inte position.
Note:
- When you install it, please leave 2cm margin at the bottom so that it does not drag on the floor.
- The central part of the screen door should be slightly higher than the two sides in order to be balanced.
- Press the adhesive tape until secure and don’t move the curtain for at least 24 hours.
- When not in use, tear off the curtain and don’t remove the adhesive tape.
- Be careful when using the pins.
- Since the product is made of polyester fiber,and could have the characteristic smell, please allow the mesh to air-dry before use.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>