LOREX N847 Fusion NVR 4K 16 Camera Capable User Guide
- June 13, 2024
- Lorex
Table of Contents
LOREX N847 Fusion NVR 4K 16 Camera Capable User Guide
What’s Included
-
4K Fusion NVR
-
Ethernet Cable
-
USB Mouse
-
Power Adapter
-
HDMI Cable
Recorder Overview
- Hard Drive, Power & Network Statuses
- USB Port
- Info/Panic Button
- QR Code
- Power Connection
- Camera Connection (PoE)
- Network Connection (LAN)
- Monitor Connection (VGA)
- Audio Out/In
- Monitor Connection (HDMI)
Wired Camera Connection
Note: May be sold separately
Connect your camera directly to your recorder using the camera’s Ethernet extension cable.
Recorder Setup
- Connect your recorder to your Wi-Fi router using the Ethernet cable
**Required for Fusion Wi-Fi camera connection or to access remotely via the Lorex Home app.
**
-
Connect the USB mouse to your recorder. Then connect your recorder to your TV using the HDMI cable (the HDMI supports up to 4K resolution)
-
Connect the power adapter to your recorder and a power outlet. Complete the Lorex Setup Wizard and select Network Setup when prompted.
Download the Lorex Home App
-
Download
-
Tap
-
Follow the in-app instructions.
Needed
High-speed Internet with an upload speed of 6 Mbps for one 4K channel (at
least 24 Mbps for the whole system).
Fusion Wi-Fi Camera Connection
Note: May be sold separately
-
Turn your Fusion Wi-Fi camera on.
-
Open
-
Tap
-
Follow the in-app instructions.
-
From your recorder’s Live View, click on a channel + .
-
Click
-
Double-click your Fusion Wi-Fi camera.
-
Enter your Fusion Wi-Fi camera’s password created in-app.
-
Give your Wi-Fi camera a few mintues to establish a connection.
Tip
- Make sure you are on the same network as the recorder.
- Save your newly created Fusion Wi-Fi camera password for later.
Tip
You can add up to 8 Lorex Fusion Wi-Fi devices.
Manage Notifications
After setup, your Fusion Wi-Fi camera is connected to the app twice. Turn off
your camera’s alerts to prevent getting the same notification.
- Open
- Under your recorder, swipe left to find your Fusion Wi-Fi camera.
- Tap
Need Help?
For the user manual and related support, scan the QR code or visit:
Register Your Product
Please see our full Terms of Service and Limited Hardware Warranty Policy at:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Copyright © 2023 Lorex Technology Inc.
As our products are subject to continuous improvement, Lorex reserves the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE. All rights reserved.