allen roth FSI 6802A MBLK 36 to 72 Inches Black Steel Single Curtain Rod Instruction Manual
- June 13, 2024
- Allen+Roth
Table of Contents
allen roth FSI 6802A MBLK 36 to 72 Inches Black Steel Single Curtain Rod
Product Information:
The ALLEN+ROTH Drapery Rod Set is a high-quality product designed to enhance the appearance and functionality of your curtains. The set includes all the necessary hardware and components for easy installation and usage. The product is trademarked by LF, LLC.
Product Usage Instructions
- Before starting the installation process, make sure to use a level (not included) to ensure proper alignment.
- Use the provided screws and anchor plugs if necessary.
- Begin by assembling the rod brackets (A and B) according to the instructions provided in the package.
- Attach the assembled rod brackets to the desired location on the wall using the screws and anchor plugs.
- Once the brackets are securely in place, insert the rods (C) into the brackets and lock them in place using the provided locking mechanism.
- Repeat the above steps for each additional rod included in the package.
- After securing all the rods in place, hang your curtains by placing the curtain hooks onto the rods.
- Make sure to tighten all the necessary components to ensure stability and proper functionality.
- For care and maintenance, regularly check for any loose screws or fittings and tighten them as needed. Clean the drapery rods using a soft cloth and mild detergent if necessary.
Please refer to the user manual for additional information and safety instructions.
ITEM/ARTICLE/ARTICULO # 5276626/ 5276624/ 5276627/ 5276625/5276639/ 5276637/ 5276643/ 5276640/ 5276638/ 5276644/ 5276645/52766471 5276649/ 5276646/ 5276648/ 5276650
ALLEN+ROTH and logo design are trademarks or registered trademarks of LF, LLC.
All rights reserved.
DRAPERY ROD SET
Thank you for purchasing this allen + roth product. We’ve created these easy-
to-follow instructions to ensure you spend your time enjoying the product
instead of putting it together. But, if you need more information than what is
provided here, please visit Lowes.com, search the item number and refer to the
Guides & Documents tab on the product’s page.
If the item is no longer for sale, or if you have any questions or problems,
please call our customer service department at
866-439-9800, 8 a.m. – 8 p.m.,
EST,Monday – Sunday. You could also contact us at
partsplus@lowes.com.
TROUBLESHOOTING
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list.
If anv part is missing or damaged. do not attempt to assemble the product.
Estimated Assembly Time: 30 minutes
TOOLS REQUIRED (NOT INCLUDED)
FEELING CONFIDENT
Visit lowes.com for more information
Printed in China.
CARE AND MAINTENANCE
- Clean with a soft cloth.
- Do not use abrasive cleaning agents, solvents or polishes as they may damage the finish.
PACKAGE CONTENTS
HARDWARE CONTENTS
INSTALLATION OVERVIEW
-
Using bracket as a guide, adjust to desired height and mark location on wall for mounting screws.
-
Remove bracket from wall. Drill pilot hole using 3/16 in. bit (not included) and insert wall anchors.
NOTE
- Anchors are not needed for all installation types.
-
Attach bracket to wall using screws provided.
NOTE- Repeat steps 1 to 3 for additional brackets. Use level (not included) if necessary.
-
Extend telescopic rod slightly. Remove final from smaller diameter rod section.
-
Slide additional rod over smaller diameter rod.
NOTE- At this point you should have a complete telescopic rod with 2 large diameter rods connected with 1 smaller diameter rod section in the middle.
- Add drapery (sold separately), extend rod to desired length and hang ready rod in brackets.
-
Reattach finial and tighten set screws on brackets to lock rod in place.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>