YIROKA WF006-718D Video Doorbell User Manual

YIROKA WF006-718D Video Doorbel

Product Description

Technical Parameters

Indicator Light

| Red light solids on: the camera network is abnormal

Red light blinking: waiting for connecting WiFi or being connected now (faster blinking)

Blue light solids on: camera running correctly

Microphone| Captures sound for your video
Sensor Type| 1/3″ CMOS
---|---
Pixel| 2-mega pixel

Min Illuminance

| Min color 0.01Lux@F1.2 Color 0.01Lux@F1.2

Black and white 0.001Lux@F1.2

Viewing Angle| 130°
Shutter| 1/25~1/100,000 per second
IR| High power LED with ICR
Video Compression Standard| H.264/H.265
Compression Output Bit Rate| 32Kbps~2Mbps
Maximum Image Resolution| 1920 X 1080
Frame Rate| 1~25 per second
Audio| Full duplex audio
Storage| TF Card (Max. 128G) & Cloud Storage
Image Setting| Support HD/SD, support mirror
Reset| Support
Interface Protocol| Private
Communication Protocol| TCP/IP, HTTP, DHCP, DNS
General Function| Dual stream, password protection
WiFi| Support 2.4G WiFi IEEE802.11b/g/n
Triggering Method| Support button triggering, motion detection triggering
Working Temperature & Humidity| -20℃~50℃, humidity less than 90% (without condensation)
Waterproof| IP55

Paired with Door Chime

Video doorbell is turned on before pairing with the door chime:
Video doorbell can be used with door chime (products already have been paired in factory). If you need to replace the video doorbell, increase or decrease the doorbell quantity, please follow steps below:

1. Learning Code Pairing
   Press and hold “Set” button for about 3 seconds, the door chime will ring (bird voice), press the video doorbell 2 times within 30 seconds. If door chime rings, the pairing is successful. If door chime does not ring, please press the video doorbell again until pairing is successful. For matching multiple video doorbell, please repeat the above operation.

2. Delete Pairing
   Press and hold “Set” button about 10 seconds until the door chime rings two times. All pairing code will be deleted completely.

Download APP and Connect

Tuya Smart is available for both IOS and Android. Search the name ” Tuya Smart ” in APP store or scan the QR-code to download the APP.

Set Up Router
This device only supports 2.4GHz WiFi router, does not support 5GHz router, please set the relevant parameters of the router before WiFi configuration. WiFi password is not allowed to include special characters such as ~!@#$%^&*() etc. When configure WiFi for the device, the mobile phone and device are as close as to the router, which can speed up the configuration of device.

Registration Process
Open the Tuya APP, click ” Register “, read the ” Privacy Policy ” and click ” Agree “. Input a legal and valid mobile number or email address, then click ” Continue “. And enter verification code, then log in the APP.

Connect

1. Click ” Add Device ” or ” + ” icon to add camera. Click ” Security & Video Surveillance ” >> ” Smart Camera(Wi-Fi) ” or ” Smart Doorbell “.

2. In “Add Device” interface, click “Next” icon, then enter WiFi name and password. **
   Note：**

3. Camera only supports 2.4GHz WiFi network.

4. WiFi name and password mustn’t exceed 24 digits.

5. Please make sure the indicator light is flashing quickly before entering into WiFi page. If not, please try to reset device.

6. Use video doorbell to scan the QR code in the mobile phone (please place the mobile phone QR code facing the video doorbell about 15-20cm) until hear doorbell ” dong dong dong ” sound prompt and doorbell indicator flashes blue. Then click “I Heard a Prompt” icon.

7. When connecting, please make sure your router, mobile phone and doorbell are as close as possible. When doorbell added successfully, you can click ” ” icon to rename the doorbell.

Setting

In the “Smart Doorbell” interface, you can click ” ” icon to set the doorbell basic functions.

Share Device

Share Device

In “Smart Doorbell” setting interface, you can click “Share Device” icon, then chick “Add Sharing” icon and enter their phone number or email to share the device.
Remark: please tell shared members to download and register Tuya APP first.

Remove Device

1. In “Home” interface, press “Smart Doorbell” icon for 1s, then select the smart doorbell and click “Remove Device” to remove it.
2. In “Smart Doorbell” interface, click” ” icon, and click “Remove Device” at the end of setting interface to remove it.

Remove Shared Device

If you don’t need to share the device, you can click the shared account, swipe left to click “Delete”, and no more share the device.

More Services

If you want to experience more services, you can click “Me” icon, then click “Third-Party Voice Services” >> “More>” (like Alexa, Google Assistant etc. voice service) or “Featured” (like cloud storage, message notification etc. service), but it may have charge for the service. Please check the app tips for specific fees.

How to Connect Doorbell with Google Assistant

Set Up Google Assistant Device

1. Power on the Google Assistant device (like Google Home or Google Next Hub etc.) and connect to same wifi network with doorbell camera.
2. Download and open the Google Home app, click “get started” icon and log in your google account, then finish the related setting as per instruction.

Connect Tuya Smart with Google Assistant

1. Click “+” icon in the upper left corner, then click “Set up device”, then click “Works with Google”.
2. Search and click “Tuya Smart” in the add devices, remove it to the room you need and finish the setting.
3. Control the doorbell by Google Assistant
   After setting done, you can control your Tuya Smart doorbell by giving voice commands to Google Assistant. You can use “Ok Google” or “Hey Google” to wake up your Google Assistant device. For example, you can say “Ok, Google, show me the front door doorbell”.

How to Connect Doorbell with Alexa

Set Up Alexa Device

1. Power on the Alexa device (like Amazon Echo Show or Amazon Echo Spot etc.) and connect to same wifi network with doorbell camera.
2. Download and open the Amazon Alexa app, log in your Amazon account.
3. Click “devices” in the bottom side, select group (e.g. Living Room) where you added the device, and you’ll see Alexa device in this group.

Connect Tuya Smart with Alexa

1. Click “ ” icon in the bottom right corner, then click “Skills & Games”.
2. Search and click ” Tuya Smart “, then click “Enable To Use” and finish the setting.

Control The Doorbell by Alexa
After setting done, you can control your Tuya Smart doorbell by giving voice commands to Alexa. You can use “Ok Alexa” or “Hey Alexa” to wake up your Alexa device. For example, you can say “Ok Alexa, show me the front door doorbell”.

Product Installation

Before installation, please complete the operation as per user manual and place the doorbell in the installation location to test doorbell work well or not.
Note: Don’t install the doorbell on the metal door to avoid metal door shield the wifi signal.

Doorbell Back Plate Installation:
3M Double-sided Tape Installation:

1. Tear off the 3M double-sided tape on the doorbell back plate.
2. Fix the doorbell back plate to the wall (make sure smooth &dust free surface), and press about 30s to fix it.

Screw Installation:

1. Use the doorbell back plate to locate the hole, drill the hole and fix the screw rubber plug to the hole.
2. Fix the doorbell back plate with screws to the rubber plug.

Power Cable Connection & Doorbell Installation:

1. Fix the power cable to doorbell back side with screw.
2. Open the 2 connector upwards, fix the power cable other side to the power cable connector and close the connector downwards.
3. Connect and fix the power cable connector side to the transformer cable on the wall.
4. Fix the doorbell to back plate with anti-theft screw in the bottom side.

Remark: If you buy extra 15° angle mount bracket, please fix the angle mount bracket to the wall with screw first before fixing the doorbell back plate to the wall.

Functions

Two Way Audio
When the visitor push the doorbell button, you will get a call notification. You can see and hear the visitor if get through the call in your APP.

Motion Detection
Call notification will be sent to your phone APP when movement is detected.

Share Device
The doorbell can be shared with families and friends and they can also preview online.

Record
Record every moment using SD card storage or cloud storage.

Night Vision
Powerful night vision means no interruptions even in the night.

FAQ

Q: What should I pay attention to when testing?
A: Please read our manual carefully before testing, if any questions, please check with our factory. Most importantly, when speak with visitor in front of doorbell, pls place the phone at least 5m away from the doorbell, which won’t cause signal interference or noise.

Q: When does the doorbell need to be reset? And how to reset?
A: It needs to be reset when the doorbell couldn’t work well normally or can’t be connected to the phone. You can use the tooling to press the Reset hole for about 10 seconds to reset.

Q: How to do if repeated adding failed?
A: After adding failed for first time, please reset the doorbell or power off, then try to add again. And it only supports 2.4GHZ WiFi router, please make sure you are using a 2.4GHZ WiFi router, also correct wifi password.

Q: The doorbell video cannot be previewed properly?
A: Check whether network is good or not, you can place the doorbell close to the router. If still not works, pls reset the doorbell and add again.

Q: How to change doorbell network to another router?
A: Remove the device on the APP and configure the device again.

Q: Why Can’t I receive the push message notification by phone APP?
A: Please confirm that the APP has been running well on the phone, and relevant reminder function has been opened like message notification and authority confirmation in the phone system.

Q: Why doesn’t the device identify the SD card?
A: Please insert the SD card before doorbell powered on. And make sure whether SD card is good and FAT32 format or not.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>