BATAVIA BT-CRW001 Cordless Ratchet Wrench Instruction Manual

: June 13, 2024
: BATAVIA

BATAVIA BT-CRW001 Cordless Ratchet Wrench Instruction Manual

BATAVIA Cover Page

Parts

Overview

Forward/ reverse rotation lever
Battery charge indicator
LED work light
On-off trigger
Battery (not included)
Battery Release Button

Prefer a digital instead of a paper manual or another language than English?

Go to bataviapower.com or scan the QR-code. Less paper, more digital.

Dear customer

Please familiarize yourself with the proper usage of the device by reading and following each chapter of this manual, in the order presented. Keep these operating instructions for further reference.

Please read all safety instructions!

This manual contains important information on operating and handling the device. Keep these operating instructions for further reference. Please pass it on along with the unit if it is handed over to a third party.

Battery and charger not included!

The battery is available separately under art. No: 7064221 (2Ah). The charger is available separately under art. No: 7064222 (2.4A) or 7064223 (0.4A).

These items are available online and in participating stores.

Explanation of the symbols

The following symbols are used in the user manual or on the product:

Warning! To reduce the risk of injury, the user must read the instruction manual.

Denotes risk of personal injury, loss of life or damage to the tool in case of non-observance of the instructions in this manual.

Always wear hearing protection. The effects of noise can cause hearing loss.

Wear safety glasses. When working with electric power tools, sparks, splinters, chips and dust particles may be generated and these can cause loss of sight.

Wear safety gloves!.

Variable speed control.

CE stands for “Conformité Européenne”, which means “In accordance with EU Regulations”. With the CE marking, the manufacturer confirms that this Electric tool complies with the applicable European directives.

Do not dispose of electric power tools with domestic refuse.

Machine specific safety warnings for cordless ratchet wrench

Wear hearing protection when impact screwing. Exposure to loud noise can lead to hearing loss.
Secure the workpiece! A workpiece securely held by a clamping device or vice is much safer than one held in your hand.
Hold the power tool firmly. High torques can occur for brief periods while tightening and loosening screws.
Wait until the power tool has come to a stand-till before putting it down. The tool can jam his leading to loss of control of the power tool.
Hold the power tool by insulated gripping surfaces, when performing an operation where the fastener may contact hidden wiring. Fasteners contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
Always be sure you have a firm footing. Be sure no one is below when using the tool in high locations.
Wear ear protectors. Exposure to noise can cause hearing loss.
Check the impact socket carefully for wear, cracks or damage before installation.
Keep hands away from rotating parts.
Do not touch the ratchet head, impact socket, bolt, nut or the workpiece immediately after long time operation. They may be extremely hot and could burn your skin.
Use protective equipment. Always wear safety glasses when working with the machine. The use of protective clothing is recommended, such as dust mask, protective gloves, sturdy non-slip footwear, helmet and ear defenders.
The dust produced when using this tool may be harmful to health. Do not inhale the dust. Wear a suitable dust protection mask.
Do not work with any materials that present a danger to health (e.g. asbestos)
Switch the device off immediately if the insertion tool stalls! Do not switch the device on again while the insertion tool is stalled, as doing so could trigger a sudden recoil with a high reactive force. Determine why the insertion tool stalled and rectify this, paying heed to the safety instructions. The possible causes may be:
- it is tilted in the workpiece to be machined
- it has pierced through the material to be machined
- the power tool is overloaded
Do not reach into the machine while it is running.
When working in walls ceiling, or floor, take care to avoid electric cables and gas or waterpipes.
Clamp your workpiece with a clamping device. Unclamped workpieces can cause severe injury and damage.

Before first use

Remove any packing material and loose parts from unit. Check the accessories before use. It should be fit with the machine and your purpose. If the machine is new, the battery must first be charged.

Attention!

After long time storage, the battery capacity will be reduce. Battery is housed in the handle, press the battery retention clips, and remove battery from handle. A substantial drop in operating period per charge indicates that the battery is worn out and must be replaced.

Intended use

The ratchet wrench is intended to be used only by adults who have read and understood the instructions and warnings in this manual, and can be considered responsible for their actions. The product is intended for fastening and removing screws and bolts using an impact socket. The product is intended for consumer use only. Do not use the product for any other purpose. Use of the product for operations different from intended could result in a hazardous situation.

Operation

On/Off Trigger

Use the On/Off trigger (4) to start the machine and keep holding it for continuous operation.
The rotation speed can be varied by depressing the On/Off trigger. The more the trigger is pressed, the faster the rotation speed.
To switch the machine off, release the On/Off trigger

Reverse-rotation Lever

Important! The machine has to come to a complete stop before the reverse rotation lever can be used; otherwise the machine may be damaged.

Use the reverse-rotation lever (1) to switch between clockwise (normal) and anticlockwise rotation or vice-versa. With the reverse-rotation lever in the central position the trigger switch is locked and cannot be depressed. Put the reverse-rotation lever in the central position before you put the machine down, to avoid unintentional starting.

LED work light

The LED work light (3) will be lit automatically as soon as you press the ON/OFF trigger (4).

Accessories

Use only accessories with an allowable speed matching at least the highest no- load speed of the tool.

Maintenance and Cleaning

WARNING: Always disconnect from the mains power supply, before carrying out any maintenance/ cleaning of the charger. Remove the battery before carrying out any maintenance/cleaning of the tool.

Maintenance

There are no inner parts of the tool which need maintenance.

Cleaning

Keep safety devices, ventilation openings and the motor housing as free as possible from dirt and dust. Rub the electric power tool with a clean cloth or blow over it with low pressure compressed air.
We recommend that you clean your electric power tool immediately after each use.
Clean the electric power tool regularly with a damp cloth and somewhat soft soap.

Do not use any cleaning or solvent materials; these can attack the device’s plastic components. Make sure that no water can get inside the electric power tool.

Technical data

Speed . . . . . . . . . . . . . . . . . 300 min-1
Chuck size . . . . . . . . . . . . 3/8” (9.5 mm)
Max. torque. . . . . . . . . . . . . . . .45Nm
Weight. . . . . . . . . . . . . . . . . . 0.68kg
Sound Pressure Level LpA . . . . . 80 dB(A)
Uncertainty KpA. . . . . . . . . . . . . . . 3 dB
Sound Power Level LWA . . . . . . . 91 dB(A)
Uncertainty KWA . . . . . . . . . . . . . . 3 dB
Hand Arm Vibration . . . . . . . . 11.64 m/s2
Uncertainty K. . . . . . . . . . . . . .1.5 m/s2

Noise/Vibration information

Measured sound values determined according to EN62841.

Wear hearing protection!

Vibration total values (triax vector sum) determined according to EN62841:

The vibration emission level given in this information sheet has been measured in accordance with a standardized test given in EN62841 and may be used to compare one tool with another

It may be used for a preliminary assessment of exposure.

The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period.

An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period.

Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns.

Vibration risk limitation suggestions:

Wear glove during operation
Limit operating time and shorten trigger time.

Disposal

Do not dispose of electric power tools with domestic refuse.

The electric power tool is shipped in packaging to reduce transport damage. This packaging is a raw material and as such can either be reused or can be fed back into the raw material cycle. The electric power tool and its accessories are made from various materials such as metals and plastics. Take defective components to a special refuse collection point. Ask about these at your specialist shop or local council. The product and the user manual may be subject to changes. Technical data may be changed without prior notice.

Batteries

Think of the environment when disposing of batteries. Contact your local authorities to find out where your nearest disposal area is. Do not dispose of batteries with domestic refuse.

Do not dispose of by burning, risk of explosion.

EC-Declaration of conformity

We, the Batavia B.V., Weth. Wassebaliestraat 6d, NL-7951 SN Staphorst , declare by our own responsibility that the product Cordless Ratchet Wrench, Model BT-CRW001, Item-No 7064220 is according to the basic requirements, which are defined in the European Directives Electromagnetic Compatibility 2014/30/EU (EMC), 2006/42/EC (Machinery), 2011/65/EU (RoHS) and their amendments. For the evaluation of conformity, the following harmonized standards were consulted:

EN62841-1:2015
EN62841-2-2:2014
AfPS GS 2019:01 PAK
EK9-BE-91(V4):2020
EN55014-1:2017
EN55014-2:2015

Staphorst, 09 March 2022

Meino Seinen, QA Representative Batavia B.V., Weth. Wassebaliestraat 6d, 7951 SN Staphorst, Netherlands

The product and the user manual may be subject to changes. Technical data may be changed without prior notice.

BATAVIA B.V. | Weth. Wassebaliestraat 6d | 7951SN Staphorst | Netherlands

Documents / Resources

| BATAVIA BT-CRW001 Cordless Ratchet Wrench [pdf] Instruction Manual
BT-CRW001 Cordless Ratchet Wrench, BT-CRW001, Cordless Ratchet Wrench, Ratchet Wrench, Wrench
---|---