Barkan 3500-MAN-ONL-2212 TV Ceiling Mount Instruction Manual

Barkan 3500-MAN-ONL-2212 TV Ceiling Mount

Product Information

• Product Name: TV Ceiling Mount
• Color: Black
• Additional Color: Black & White
• Features: Swivel, Height adjustment (16.1-38″ / 41-97 cm), Tilt
• Assembly Instructions: Download Assembly Instructions with Text
• For more information, visit: barkanmounts.com

Product Usage Instructions

TV Size: 13-65″ (33cm-165cm) TV Weight: US EU: 88lbs (40kg)

CAUTION: This Mount is intended for use only with the maximum weight indicated. Using heavier products might cause injury.

CAUTION: You are obligated to read the safety and assembly instructions! Disregarding them may lead to injury and the falling of the electrical appliance.

Please ask your installer to provide a warranty for the installations of the product. Installation of this product is only authorized on non-moving building walls and ceilings. The included hardware is not suitable for installation on walls and ceilings made of: gypsum board, drywall, light processed blocks, silicate boards/bricks, a damp wall, weak or very old blocks or wooden panel!

PRODUCT DIMENSION

Download Assembly Instructions with Text

For more information: barkanmounts.com

If you are satisfied with the product, please give us a 5 stars rating on the website you bought it from If you are not satisfied please contact us at https://www.barkanmounts.com/support and we will solve the problem for you

CAUTION This Mount is intended for use only with the maximum weight indicated. Using heavier products might cause injury.

CAUTION!
You are obligated to read the safety and assembly instructions! Disregarding them may lead to injury and to the falling of the electrical appliance.

WARNING! Barkan does not take responsibility for the installation.
Disregarding the safety and assembly instructions may result in the falling of, and/ or damage to your electrical appliance. Opening the package represents your undertaking to closely read and follow the instructions. When the product is installed in public places, the people in charge in those places should make sure it is used according to the instructions. For Safety Instructions, warranty and further information, go to: www.barkanmounts.com > Support > Safety Instructions & Warranty This mount is intended for use only with the maximum weight as indicated on the box. Using heavier products might cause injury.

CAUTION!
You are obligated to read the safety and assembly instructions! Disregarding them may lead to injury and to the falling of the electrical appliance.

The anchor must be sunk at least 10 mm (3/8”) into the plaster coating

Please ask your installer to provide a warranty for the installations of the product. Installation of this product is only authorized on non-moving building walls and ceilings. The included hardware is not suitable for installation on walls and ceilings made of: gypsum board, drywall, light processed blocks, silicate boards/bricks, a damp wall, weak or very old blocks or wooden panel!

Included Parts not to scale

Required Tools

Connect the TV plate to the back of the TV

1. Continue according to your TV mounting hole pattern

1.  75×75 mm – 100X100 mm hole pattern

2.  **Hole pattern 100×200 mm up to 400×400 mm:**  

Disassemble the screws, connect the 4 Adaptors to the TV Plate and reassemble the screws.

Position the Adaptors according to your TV’s hole pattern.

3. Connect the TV Plate with the Adaptors to the TV in all 4 connection holes.

2. Follow the steps according to your ceiling type

1. Make sure all holes are drilled inside the joist/ stud
2. Make sure there are no electrical/water lines in the ceiling before drilling and then drill according to the markings

3. Mark the holes on the ceiling according to the required position

4. Drill with 5/32” \ 4mm drill bit
   First use 1/4” \ 6mm drill bit

5. Weight test
   Apply force on the upper pipe and make sure it is well connected

6. Assemble the ceiling plate plastic cover

7. Connect the three tubes according to the desired length.
   Each connection is made with two Y1 screws and Y2 nuts.
   Important – You Must use all three tubes, you can’t omit the middle tube B. You may insert all the middle tube B into the upper tube A if needed.

8. Pass the cables through the pipes.

9. Place two nuts (Z8) in the nut housing (P2).

10. Attach the nut-housings (P2) .
    Make sure that the tab is inserted into the slot.

11. Push parts P3 down on the nut-housings (P2). The upside down “T” must pass the protruding tooth (shown below).

12. Connect the TV with the TV plate to the bracket

1. Insert and tighten the screws from both sides to create friction for the tilt mechanism. Adjust the TV tilt angle carefully.

13. Level the TV.

Disconnect the TV, remove the screws and lift the TV

BACKSCREEN CONNECTION POSITIONING OPTIONS

• All TV backscreen connections are in millimeters (Width × Height).
• There are a few sizes of TV plates available.
• The backscreen connections in position 1 are included in some of the different TV plates, according to their size, and do not require the use of the 4 adapters (marked in blue).

If your backscreen connections are not included in any of the positions, please contact us www.barkanmounts.com/support

References

• Barkan Mounts
• Barkan Mounts
• איטונג - מקבוצת אינרום תעשיות לבנייה
• Support | Barkan Mounts

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>