Barkan T70VL Lockable Anti-Theft Tablet Wall Mount Instruction Manual

Barkan T70VL Lockable Anti-Theft Tablet Wall Mount Instruction Manual

Included Parts

Required Tools

Assembly Instructions

1. Place the PVC adaptors inside the clamp holders
   

2. Loosen the screw, open the ruler on the back according to your device size and tighten the screw.
   Example – device 10” to 11”, open the ruler to 10”.
   

3. Installation on a wall
   

4. Installation on a monitor mount plate that is 75×75 mm
   
   Follow the steps according to your wall type
   A)
   B)

5. Mark the holes on the wall according to the required height
   A)
   B)
   Make sure all holes are drilled inside the studs

Drill with 5/16” \ 8 mm drill bit

Drill with 1/8” \ 3mm drill bit


The anchor must be sunk at least 3/8″\10 mm into the plaster coating

6. Weight test
   Apply force on the upper part of the mount and make sure it is well connected
   

7. Installation on a monitor mount plate that is 75×75 mm
   

8. Locking
   Unlock the clamp
   
   Open the clamp, relock it and take out the key
   
   Close the clamp on your device
   

9. 

References

• Barkan Mounts
• Support | Barkan Mounts

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>