Barkan Mounts SW411H Mobile TV Mount Cart with Metal Shelf Instruction Manual

Barkan Mounts SW411H Mobile TV Mount Cart with Metal Shelf

Product Information

The Mobile TV Mount Cart with Metal Shelf is a product that allows you to mount a TV with a size ranging from 13-83 inches (33cm-211cm) and a weight of up to 110lbs (50kg). The mount cart is equipped with a tilt function and height adjustment feature that allows you to adjust the height from 40.9-59.8 inches (104-152cm). The product comes with B Adaptor X4, S Swivel mechanism, P11 Plastic cover, P12 Base cover, C Base rear, A TV plate, H Upper pipe, L Shelf, G Lower pipe, P10 Plastic cover, E Base Front, D Base center, F Wheel X 4, Z6, Z7, Z8, M6 x8, x4, x4, P1 and P2 hardware.

It is important to note that ignoring the safety and assembly instructions may result in serious or fatal injuries from tip over or the falling of the product and the electrical appliances. The mount cart is not intended for use in public places. For safety instructions, warranty and further information, visit www.barkanmounts.com > Support > Safety Instructions & Warranty.

Product Usage Instructions

1. Read and follow the safety and assembly instructions carefully. Disregarding them may lead to injury and to the falling of the electrical appliance.
2. Do not use the mount cart in public places.
3. Make sure that the TV size and weight do not exceed the maximum limits indicated on the box. Using heavier products might cause injury.
4. Do not place the product on inclined surfaces, at the edge of a surface or near stairs.
5. Keep children under the age of 15 away from the product.
6. Adjust the TV tilt angle carefully. Using excessive force might break the screen or tip over the product.
7. Unlock the product slowly. Do not move the product by gripping the TV itself.
8. Assemble the product according to the instructions provided.
9. If you are satisfied with the product, give a 5-star rating on the website you bought it from. If not satisfied, contact the manufacturer at https://www.barkanmounts.com/support to solve the problem.

Mobile TV Mount Cart with Metal Shelf

Warning! Ignoring the safety and assembly instructions may result in SERIOUS OR FATAL INJURIES from tip over or the falling of the product and the electrical appliances. Opening the package represents your undertaking to closely read and follow the instructions. This product is not intended for use in public places. For Safety Instructions, warranty and further information, go to: www.barkanmounts.com › Support › Safety Instructions & Warranty

For more information: barkanmounts.com

If you are satisfied with the product, please give us a 5 stars rating on the website you bought it from. If you are not satisfied please contact us at https://www.barkanmounts.com/support and we will solve the problem for you.

CAUTION This Mount is intended for use only with the maximum weight indicated. Using heavier products might cause injury.

CAUTION!
You are obligated to read the safety and assembly instructions! Disregarding them may lead to injury and to the falling of the electrical appliance.

WARNING! Barkan does not take responsibility for the installation and possible tip-over.
Ignoring the safety and assembly instructions may result in SERIOUS OR FATAL INJURIES from tip over or the falling of the product and the electrical appliances. Opening the package represents your undertaking to closely read and follow the instructions. This product is not intended for use in public places.
For Safety Instructions, warranty and further information, go to: www.barkanmounts.com › Support › Safety Instructions & Warranty This mount is intended for use only with the maximum weight as indicated on the box. Using heavier products might cause injury.

Warnings!

• Tip Over Hazard!
• Anchor the product to the wall –using 2 strong cables
• Collision Hazard – place the product in a position that will prevent people from colliding with it
• Do not place the product on inclined surfaces, at the edge of a surface or near stairs
• Release Wheel Brakes – do not lock more than 1 wheel
• Move Carefully – Release the wheel brakes, grasp the vertical bar with BOTH hands and move the product slowly. Do not move the product by gripping the TV itself
• Keep children under the age of 15 away from the product
• Adjust the TV tilt angle carefully. Using excessive force might break the screen or tip over the product.

Main Parts

Included Hardware

not to scale

Required Tools

Connect the TV plate to the back of the TV

1. Continue according to your TV mounting hole pattern.

   • 75×75 mm up to 200X200 mm (inclusive) hole pattern
   • 1b Hole pattern above 200×200 mm and up to 600×400 mm:
   • Disassemble the screws.
   • Connect the 4 adaptors to the TV plate and reassemble the screws.
     Position the adaptors according to your TV’s hole pattern.
     For additional positioning options please turn to page 15
     Connect the TV plate with the adaptors to the TV in all 4 connection holes.

2. Long – Long: Connect the Base front (E) to the longer end of the Base center (D). Short – Short: Connect the Base rear (C) to the shorter end of the Base center (D).

3. Connect the wheels. Make sure they are locked .

4. Connect the lower pipe (G) to the base center (D). Make sure that the hole for cables is facing to the base rear.

5. Slide P10 to the bottom of the lower pipe.

   • Place P11 on the top of the lower pipe.
   • Attach P12 (x2) to the connections points between base front/ rear and base center.
   • Slide the upper pipe into the lower pipe.

6. Pass the cables through the pipes.

7. Adjust the stand to the desired height and screw in the screws.
   Shelf Assembly
   Full Tightening – Whenever the full tightening icon is displayed, make sure to place a nut inside the hexagonal slot and that the endpoint of the screw crosses the edge of the nut.

8. Remove plastic parts (J) from the U-shaped part (I).

9. Connect the base (K) to the U-shaped part (I)

10. Connect the shelf (L) to the base.

11. Assemble the plastic parts (J) on the lower pipe (G).

    •  Attach the U-shaped part on it.

12. Set the shelf height. Place the nut inside the hexagonal slot and screw in the screw.

13. Place two nuts (Z8) in each of the two nut-housings (P2).

14. Attach the nut-housings (P2) on to part S. Make sure that the tab is inserted into the slot.

15. Push parts P3 down on the nut-housings (P2). The upside down “T” must pass the protruding tooth (shown below).

16. Weight test Apply force on the on the product and make sure it is assembled properly.

17. Connect the TV plate with the TV to the upper pipe (H).
    Make sure that the TV plate slots are positioned properly on the 2 small beams

18. Insert and tighten the screws from both sides to create friction for the tilt mechanism. Adjust the TV tilt angle carefully.

19. Level the TV.

BACKSCREEN CONNECTION POSITIONING OPTIONS

www.barkanmounts.com/FAQ

References

• Barkan Mounts
• Barkan Mounts
• Support | Barkan Mounts

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>