SANELA SLP 02KZ Urinal Infra Red Flushing Instruction Manual
- June 13, 2024
- SANELA
Table of Contents
EN ISO 9001:2015
SLP 02KZ
SLP 02KVZ
Urinal infra-red flushing unit with a mounting box and integrated power
supply, 230 V AC – SLP 02KZ
https://www.sanela.cz/hledat/slp02k
Instructions for use
Function
Properties
Mounting instructions
Supplied equipment
| Position | Order num. | Quantity | Note |
|---|---|---|---|
| 1 | 45289 | 1 | SLP 02KZ |
| 48586 | 1 | SLP 02KVZ | |
| 2 | 45341 | 1 | |
| 3 | 50313 | 4 | |
| 4 | 45784 | 1 |
Installation
It is necessary, for the proper function, to keep the unit under constant voltage (don´t connect the power supply unit behind the switch into the light circuit)!
Recommended accessories
SLA 02 inlet fitting with a rubber seal for urinals with a back water inlet
SLD 03 universal remote control for parameters adjustment
SLR 02 mounting frame to the plasterboard for the urinals and infra-red
flushing unit placed above the urinal
More information
It is recommend to check up the sifter of electromagnetic valve once a year,
because of there is a possibility that valve could be fouled up. Checking of
tightening of screw conections and connectors contact surfaces is also
recommend once a year.
All stainless steel components should be cleaned only by water soap and soft
rag. It is strictly forbidden to use aggressive and abrasive cleansers! We
recommend to use for cleaning the product SLA 37 from SANELA assortiment.
It is necessary to proceed according to the law about packaging material after
unpacking of the product.
Producer assures that this product has declaration of conforminty in
accordance with the regulation 73/23/EHS and 92/31/EHS.
12/2022
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>