SANELA SLD 03 Washbasin Tap Instruction Manual
- June 13, 2024
- SANELA
Table of Contents
**SANELA SLD 03 Washbasin Tap
**
Instructions for use
Function
Properties
Mounting instructions
Supplied equipment
SLU 08L – Obj. č. (Code Nr.) – 13085
SLU 08LD – Obj. č. (Code Nr.) – 13087
Position
| Order num.| Quantity|
Note
---|---|---|---
1
| 46613| 1| SLU 08L
2| 46614| 1|
SLU 08LD
3
| 48390|
1
|
4
|
1
|
5
|
1
|
6
|
1
|
7
| 44613|
1
|
8
| 45936|
1
|
9
| 45380|
1
|
10
| 47786|
1
|
11
| 46268|
2
|
12
| 08540|
2
|
Installation
It is necessary, for the proper function, to keep the unit under constant voltage (don´t connect the power supply unit behind the switch into the light circuit)!
Recommended accessories
SLD 03 universal remote control for setting of infra-red sensors
SLZ 01Y external power supply 24 V DC for operating of max 5 pcs. of
washbasin taps
SLZ 01Z external power supply 24 V DC for operating of max 9 pcs. of
washbasin taps
SLZ 04Y external power supply 24 V DC on DIN rail, for operating of max.
5 pcs. of washbasin taps
SLZ 04Z external power supply 24 V DC on DIN rail, for operating of max.
9 pcs. of washbasin taps
SLZ 04X external power supply 24 V DC on DIN rail, for operating of max.
15 pcs. of washbasin taps
SLZ 06 power supply 24 V DC for operating of max. 1 pc. of washbasin tap
More information
It is recommend to check up the sifter of electromagnetic valve once a year,
because of there is a possibility that valve could be fouled up. Checking of
tightening of screw connections and connectors contact surfaces is also
recommend once a year.
It is necessary to proceed according to the law about packaging material after
unpacking of the product.
Producer assures that this product has declaration of conformity in accordance
with the regulation
73/23/EHS and 92/31/EHS.