NEEWER PA005E Side Handle with Wireless Control Instruction Manual

: June 13, 2024
: NEEWER

Table of Contents

NEEWER PA005E Side Handle with Wireless Control
Product Information
Product Usage Instructions
Version Control
Package Contents
Product Illustration
Installation Instructions
Specification
FCC Statement
IC Warning Statements
Contact Information
Read User Manual Online (PDF format)
Download This Manual (PDF format)

NEEWER PA005E Side Handle with Wireless Control

NEEWER-PA005E-Side-Handle-with-Wireless-Control-
PRODUCT

Product Information

The device is designed to meet general RF (Radio Frequency) exposure requirements. It is important to note that RF exposure refers to the level of electromagnetic radiation emitted by the device. It is recommended that the device be installed and operated with a minimum distance of 0mm between the radiator (the part of the device that emits RF radiation) and your body. This distance ensures that you maintain a safe distance from the RF radiation.

Product Usage Instructions

Before using the device, ensure that it is properly installed according to the manufacturer’s guidelines.
Keep a minimum distance of 0mm between the radiator (the part that emits RF radiation) and your body. This means that you should avoid direct contact or placing the device too close to your body.
When using the device, position it in a way that allows for the recommended minimum distance to be maintained at all times.
Do not modify or alter the device in any way, as it may affect the RF exposure levels and compromise safety.
If you experience any discomfort or health-related issues while using the device, discontinue use immediately and consult a medical professional.
Follow any additional safety instructions provided by the manufacturer for optimal usage and to ensure compliance with RF exposure requirements.

It is crucial to prioritize your safety and adhere to these usage instructions to minimize potential RF exposure risks associated with the device.

Copyright
© 2023 Shenzhen Newer Technology Co., Ltd. All Rights Reserved. This document is the sole property of Shenzhen Newer Technology Co., Ltd and shall not be, reproduced, transmitted, transcribed, stored in a retrieval system or translated in any form, by any means, without prior written permission from Shenzhen Newer Technology Co., Ltd. Shenzhen Newer Technology Co., Ltd reserves the right to change content in this instruction manual at any time and without prior notice.

Version Control

$NEEWER-PA005E-Side-Handle-with-Wireless-Control-FIG- $1$$

Package Contents

$NEEWER-PA005E-Side-Handle-with-Wireless-Control-FIG- $2$$

Product Illustration

$NEEWER-PA005E-Side-Handle-with-Wireless-Control-FIG- $3$$

Installation Instructions

Installation Instructions for NEWER Universal Phone Cage PA009
Remove one of the PA009 handle adapters

  * Remove the original handle adapter using the L shaped hex key.
2.  **Install the Bluetooth Side Handle**

Attach the removed adapter to the side of the Bluetooth handle using the Lshaped hex key. $NEEWER-PA005E-Side-Handle-with-Wireless-Control-FIG- $5$$

3.  **Install PA009**

Tighten the screw partly by hand and secure using the L shaped hex key . $NEEWER-PA005E-Side-Handle-with-Wireless-Control-FIG- $6$$

4.  **Expand using an LED light**

Use the added cold shoe mount on the top to attach additional equipment such as a LED light or microphone, as needed. $NEEWER-PA005E-Side-Handle-with- Wireless-Control-FIG- $7$$

Installation Instructions for NEWER Dedicated Phone Cage PA006 PA011
Install the Bluetooth side handle
Attach the NEWER dedicated phone cage adapter to the side of the handle and tighten it with the L shaped hex key. $NEEWER-PA005E-Side-Handle-with- Wireless-Control-FIG- $8$$
Install PA006 or PA011
Tighten the screw partly by hand and secure using the L shaped hex key . $NEEWER-PA005E-Side-Handle-with-Wireless-Control-FIG- $9$$
Installation Instructions for Other Brands of Phone Cages
Choose the narrow positioning pin phone cage adapter and follow the installation instructions mentioned in Step 2. $NEEWER-PA005E-Side-Handle- with-Wireless-Control-FIG- $10$$

Specification

$NEEWER-PA005E-Side-Handle-with-Wireless-Control-FIG- $11$$

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAUTION:
The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC RF Radiation Exposure Statement:

This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

IC Warning Statements

Warning Statement
“This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).

This radio transmitter has been approved by Industry Canada to operate with the antenna types listed with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.

The device has been evaluated to meet general RF exposure requirement. This equipment should be installed and operated with minimum distance Omm between the radiator & your body.