ionbottles Hydrogen Generator Glass Water Bottle User Manual
- June 5, 2024
- ionbottles
Table of Contents
THE #1 RATED HYDROGEN GENERATING WATER BOTTLE
User Manual
OVERVIEW OF IonBottle™ Hydrogen Generator
- Stainless Steel Twist on Lid
- Borosilicate Glass 14 Oz Bottle
- Hydrogen Generator with Titanium SPE/PEM Technology
Features
- 14oz (420 ml)
- Titanium SPE/PEM
- Stainless steel base and lid
- Borosilicate glass bottle
- High H2 Concentration
- Rechargeable lithium-ion battery 1000 mAh
- Up to 20 cycles per charge
Specifications:
| Main Body: | Borosilicate Glass Polycarbonate (PC). |
|---|---|
| Seals: | Silicone Rubber, 304 Stainless Steel. |
| Base: | Titanium/Platinum Polymer Exchange Member |
| Color: | F5-silver |
| Capacity: | 400 Milliliters |
| Battery | 1000 mAh Lithium-ion battery |
Care Instructions:
- Do not put it near an open fire source.
- Do not use it in the microwave oven.
- Do not submerge the base of your bottle in water or run it through a dishwasher.
- If the bottle is not used for a long period, it is recommended to recharge once a month to maintain the battery quality.
- Ensure the rubber seal is secure within the base and lid to maintain a perfect watertight seal.
- Only use the charging USB cable that comes with the bottle for the power supply.
- Remove from the charger before use.
Introduction
ionBottle is the leading hydrogen-generating water bottle supplier in the Northwest, using SPE/PEM through electrolysis, to infuse puremolecular hydrogen in your drinking water. This bottle can produce water that contains concentrated hydrogen gases, which is equivalent to the antioxidant value of hundreds of fruits and vegetables and known to help in reducing inflammation in the body.
Hydrogen Water: Hydrogen Water is water with dissolved Molecular Hydrogen (H2). It is one of the easiest ways to get more hydrogen in the body. It is a colorless, tasteless and odorless gas with many different potential health benefits.
Health Benefits
- Reduce Fatigue and Boost Energy
- Promote Cardiovascular Health
- Increase Antioxidant
- Anti-Inflammation Benefits
- Anti-Aging Skin Benefits
Steps to Use
Plugin your new bottle with the supplied USB charging cable. The bottle will
glow red and then blue once charging is completed. Next, wash your bottle by
hand using soap and water, and even though the base is IP67 waterproof, we do
not recommend submerging the base in water.
Next, fill your bottle with water ( we recommend: filtered water, mineral water,
or reverse osmosis water, depending on your daily routine). Then press the
power button to turn on the bottle. The LED light will turn blue and you will
see the oxygen and hydrogen gas bubbles rising and hydrogen becoming infused
into the water.
After 3 minutes the blue LED light will turn off and one hydrogen cycle has
been completed. Please remove the lid slowly as pressure may have built up,
and enjoy drinking hydrogen-rich water!
Note: Remember to remove the lid after each power cycle to relieve
pressure. Keep the bottle in an upright position when used for best results.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>