TOSHIBA TY-ASC66 Portable Sound System User Manual

: June 4, 2024
: Toshiba

TOSHIBA TY-ASC66 Portable Sound System User Manual

Thank you for purchasing this Portable Sound System. To use this product safely, read and understand this operation manual thoroughly before using. After reading this manual, keep it in a safe place so that it can be referred to when necessary.

Safety precautions

The information you need to prevent danger to the user and other people as well as property damage is described below. “Description of signs” shows different categories of the degree of danger or damage that may occur due to wrong handling. “Description of symbols” shows the meaning of the symbols

Important notes

This book is only a guide for user’s operation, not a criterion for configuration.
Only use attachments/accessories specified by the manufacturer

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance

Warning: To reduce the risk of electric shock, do not remove \cover (or back). NO user-serviceable parts inside. Refer RISK servicing to qualified service personne

This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts

WARNING

Minimum 5 cm around the apparatus for sufficient ventilation.
The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.
No naked flame sources, such as lighted candles, should be placed on the apparatus.

Description of signs

WARNING
Indicates that there is a risk of death or serious injury.

CAUTION
Indicates that there is a risk of light injury or property damage.

Description of symbols

Indicates “Prohibition” or “You must not do” with pictures and text.

Indicates “Mandatory Action” or “Do as indicated” with pictures and text.

What to do in the case of an abnormality

WARNING

Stop using the device immediately in the case of an abnormality or failure.
Remove the power plug from the receptacle immediately when any water or foreign object enters the interior of the device.
It may cause a fire or electric shock. Remove the power plug immediately, and contact your dealer for a repair.

What to do in the case of an abnormality

WARNING

Stop using the device immediately in the case of an abnormality or failure.
Remove the power plug from the receptacle immediately when any water or foreign object enters the interior of the device.
It may cause a fire or electric shock. Remove the power plug immediately, and contact your dealer for a repair.

Power cord and power plug

WARNING

If any dust exists on the power plug pin or pin installation surface, remove the power plug and remove the dust.
The mains plug is used as disconnect device, the disconnect device shall remain readily operable.
Observe the following when handling the power cord.
- Do not damage it.
- Do not modify it (e.g. extension).
- Do not heat it.
- Do not pull it.
- Do not place a heavy object on it.
- Do not pinch it.
- Do not bend it forcefully. Do not twist it.
- Do not bundle it.

WARNING Doing so may cause a fire or electric shock.

Do not insert or remove the power plug with a wet hand. Doing so may cause a fire or electric shock.

CAUTION

When removing the power plug from the receptacle, hold the power plug.
If the device will not be used for a long time, remove the power plug from the receptacle. Doing so may cause a fire or electric shock.
Do not use any power cord other than the one that comes with the device.
Do not use the power cord that comes with the device for any other product.
Doing so may cause a fire or electric shock.

Usage

WARNING

Do not disassemble, repair, or modify the device.
Do not insert any foreign object.
When lightning starts, do not touch the antenna or power cord.
Doing so may cause a fire or electric shock.
The use of apparatus in moderate climates.

CAUTION

Before carrying the device, retract the antenna and remove the power plug from the receptacle.
Failure to do so may cause a fire, electric shock, or injury.
Do not get on top of the device.
Do not place a heavy object on the device.
Do not block the ventilation hole.
When the appliance couplet is used as the disconnect device, the appliance coupler shall remain readily operable.
To prevent possible hearing damage, do not listen at high volume levels for long periods.
Doing so may cause an injury or fire.

If you leave the unit unused for a long period of time, the built-in rechargeable battery will be in an over discharge state due to self discharge, and the charging capacity may deteriorate or the battery may be no longer rechargeable. Even if you are not using the unit, charge the battery once or twice a year for 7 hours each time

Installation

WARNING

Place the unit on a flat surface away from sources of direct sunlight or excessive heat.
Do not install the device in a confined or build-in space such as a book case or similar area, and keep it under a well-ventilated condition. The ventilation should not
be impeded by covering the ventilation openings with items such as newspaper, tablecloths, curtains, etc.
Do not expose the device to rain, moisture, dripping, or splashing.
Do not place objects filled with liquids, such as vases, on the device. Doing so many cause a fire or electric shock.
The mains plug is used as disconnect device, the disconnect device shall remain
readily operable. Doing so many cause a fire or electric shock.

Notes

If any color shift occurs on a nearby TV or the radio of this device picks up noise from the TV, keep this device away from the TV

Disclaimer

Toshiba shall not be responsible for any damage caused by an earthquake, thunderstorm, flood damage, fire for which Toshiba is not responsible, acts of a third party, other accidents, or damages caused by the user’s willful acts or negligence, misuse, or use in abnormal conditions.
Toshiba shall not be responsible for any damage caused by failure to observe the information described in the operation manual.

Disposal

When disposing of the device, observe the laws, or ordinances and rules of the local government.

Disposal

Do not dispose of lead acid batteries except through channels in accordance with local, state and federal regulations.
It is illegal to dump lead-acid batteries in landfills or dispose of improperly. Please help our Earth by contacting the environmental protection agencies in your area, the battery manufacturer, or call Toshiba toll-free at(800)231-1412 for more information about recycling.

About using Bluetooth

This unit is designed for use with Bluetooth® wireless devices compatible with the A2 DP and AVRCP streaming audio profiles. Refer to your Bluetooth® device’s user manual or technical support to determine if your Bluetooth® device supports these profiles

Frequency band used

This unit uses the 2.4 GHz frequency band. However other wireless devices may use 2.4 GHz frequency band as well and may cause interference with each other. To avoid interference, please refrain from the use of the unit at the same time with other wireless devices.

Certification of this device

This unit conforms to frequency restrictions and has received certification based on frequency laws, so a wireless permit is not necessary. However, the following action is punishable by law in some countries:

Taking apart/modifying the unit.

Usage restrictions

Wireless transmission and/or use with all Bluetooth® equipped devices is not guaranteed.
A device featuring the Bluetooth® function is required to conform to the Bluetooth® standard specified by Bluetooth SIG, and be authenticated. Even if the connected device conforms to the above mentioned Bluetooth® standard, some devices may not be connected or work correctly, depending on the features or specifications of the device.

Range of use

Use this device within an unobstructed 10 m range. The range of use or perimeter may be shortened depending on any obstructions, devices causing interference, other people in the room, or the construction of the building. Please note that the range mentioned above is not guaranteed.

The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and are used under license.

Charging the battery

This unit has a built-in Lead Acid rechargeable battery.

**To start charging the battery, connect the supplied AC cord to the socket on the back of the unit, then insert the plug into an AC receptacle.**

The CHARGE indicator lights up in red while the battery is charging. When the battery is fully charged (around 6 to 7 hours), the CHARGE indicator turns green. When the battery voltage is low and needs to be recharged, the CHARGE indicator flashes red.

Part names

BASS button
USB port
3.5mm AUX INPUT jack
6.3 mm MIC 1 jack
6.3 mm MIC 2 jack
USB CHARGE port
POWER switch
FUNCTION /
EQ button
LIGHT button
VOLUME knob
ECHO button
P-MODE / M. button
+ (10/M./FOLD.)button
– (10/M./FOLD.)button
/ TUN. + button
/ TUN .- button
MIC. VOL. knob
/ / AUTO button
CHARGE indicator
PAIR indicator
DISPLAY
FM ANTENNA
AC POWER socket
Wired microphone

Basic functions

Turning the unit on/off

Turn the POWER switch to the ON or OFF position to turn the unit on/off.

Notes

In USB/Bluetooth®/AUX mode, when no operation is performed for 15 minutes, the unit will automatically enter standby mode. To resume operation, press the FUNCTION / button. Alternatively, turn the POWER switch to the OFF position and then switch to the ON position again to turn the unit on.

Setting the function mode

To change the function mode, press the FUNCTION button on the unit to select the USB /Bluetooth®/ AUX/FM function.

Adjusting the volume

Rotate the VOLUME knob on the unit to increase or decrease the volume.
Current volume level will be shown on the display

Disco light function

Press the LIGHT button repeatedly to select the different lighting mode (L-1 to L-8 and OFF) of LED indicator light on the speaker.
L-1: Blue light flashing
L-2: Red light flashing
L-3: Green light flashing
L-4: Violet light flashing
L-5: Yellow light flashing
L-6: Light Blue light flashing
L-7: White light flashing
L-8: 7 color light flashing
The color changes to blue, red, green, violet, yellow, light blue, white and then to continuously changing between the 7 different colors
Press and hold the LIGHT button repeatedly to select the ON/OFF for the top and side light of the unit.
EON : Top and side light on, side light color changes 7 different color continuously. EOFF : Top and side light of

Equalizer function

Press the EQ button repeatedly to select the different equalizer mode. Select the mode (FLAT, POP, CLASSIC, JAZZ and ROCK) that best matches the music style. The display will show the selected equalizer mode (either “FLAT”, “POP”, “CLASSIC”, “JAZZ” or “ROCK”).

Bass

Press BASS button to switch the bass on/off. The “BASS” will be shown on the display when switched on.

Microphone echo

Press ECHO button to switch the microphone echo on/off.
The “ECHO” will be shown on the display when switched on.

USB operation

Listening to a USB device

This unit provides a USB port for music playback.

Press the FUNCTION button on the unit to select USB mode.
Connect a USB memory stick to the USB port on the top of the unit. The display will show the total number of folders for 2 seconds and then show the total number of playable tracks on the USB device
To playback and resume playback, press the / / AUTO button. The elapsed time and the ” ” will be shown on the display.
To pause playback, press the / / AUTO button on the unit. The elapsed time and the ” ” will be displayed blinking on the display
To select a desired track, press the / TUN. + or / TUN –. button either while playing or while paused until the desired track appears on the display. The unit will start playing automatically
To search for a particular passage during playback, press and hold the / TUN. + or / TUN –. button to fast forward and fast backward until the desired point (passage) is reached, then release the button for normal playback. Playback will start again from this point
To jump to +/- 10 track, press the + or – (10/M./FOLD.) button.
To select +/- folder, press and hold the + or – (10/M./ FOLD.) button.

Caution

To prevent harmful interference, always connect USB devices directly to the unit. Do not use a USB extension cable to connect USB devices to the unit.

To Repeat a Single Track

Press the P-MODE / M. button on the unit during play. The display will show ” ” and the current track will be played repeatedly.
To cancel repeat play, press the P-MODE / M. button on the unit until ” ” disappears from the display.

To repeat the folder

Press the P-MODE / M. button on the unit until ” ” FOLDER” appears on the display. The current folder will be repeated continuously.
To cancel repeat play, press the P-MODE / M. button on the unit until “ ” FOLDER” disappears from the display.

To repeat all the Tracks

1 Press the P-MODE / M. button on the unit until “ ” appears on the display.

Press the P-MODE / M. button on the unit until ” ” appears on the display. All tracks on the USB device will be played repeatedly.
To cancel repeat play, press the P-MODE / M. button on the unit until ” ” disappears from the display

Random Play

Press the P-MODE / M. button on the unit until “RAND” appears on the display.
The random play will start from next track automatically.
To cancel repeat play, press the P-MODE / M. button on the unit until “RAND” disappears from the display. Charging the device connected to the USB CHARGE port You can charge a device connected to the USB CHARGE port on the unit. 1 Connect the device to the USB CHARGE port on the top of the unit.Charging of the connected device will start.

Notes

Charging may not be possible for devices with a low current capacity (battery capacity of about 50 mAh or less).
Devices cannot be charged when the unit is off due to low battery.
To charge the mobile device connected to the USB CHARGE port, first connect the USB connector cable to the mobile device and then connect to the USB connector on the unit side. Charging may not start if you first connect to the USB connector on the unit side and then to the mobile device.
When you make the AUX connection and USB charge connection to the same mobile device, first connect the mobile device to the USB CHARGE port for charging and then make the AUX connection. Charging may not start if the AUX connection is made before USB charging.
Even if you insert a USB memory stick into the USB CHARGE port, the unit will not playback music.

Bluetooth operation

Press the FUNCTION button on the unit to select the Bluetooth® mode. The display will show “bt” and the PAIR indicator will start blinking and the unit plays the notification sound.
Following the instructions in your device’s user manual, activate Bluetooth® on your device and search for the unit “TY-ASC66” and connect. Input the password “0000” if required.
The PAIR indicator will light up and the unit plays the notification sound.
Control playback with the external device.
Rotate the VOLUME knob on the unit or adjust the volume on the external device to increase or decrease the volume as desired.

Notes

Press and hold the / / AUTO button to disconnect the Bluetooth.
You can playback and pause playback by pressing the / / AUTO button.
You can select a desired track by pressing the / TUN. + or / TUN. button.
The Bluetooth® works best within 10 meters.

AUX IN operation

Press the FUNCTION button on the unit to select “AUX” mode.
Connect your audio device to the AUX input jack of the unit with an audio cable.
Control playback with the external device.
Rotate the VOLUME knob on the unit or adjust the volume on the external device to increase or decrease the volume as desired.

FM operation

Listening to FM radio

Press the FUNCTION button on the unit to select “FM” mode.
Press the / TUN+ . or / TUN. button to tune in the station. Press and hold the / TUN +. or / TUN. button to perform automatic tuning. Tuning stops automatically when a station is received. Automatic tuning may stop due to reception noise. In such a case, perform automatic tuning again.
Rotate the VOLUME knob on the unit to increase or decrease the volume.

Automatic tuning preset

Press and hold the / / AUTO button. The device will automatically tune in and preset all of the stations that can be received in your area up to 30 preset channels.

Manual tuning preset

Select the desired station by manual tuning or auto stop tuning.
Press the P-MODE / M. button. Preset number will be displayed blinking.
Presss the or (10/M./FOLD.) button to select the preset number. You may select from “P01” to “P30”.
Note
- If you do not perform the operation within 5 seconds, the device
  will automatically return to the normal reception mode.
Press the P-MODE / M. button again. Preset number lights up. The preset number will be preset.

Select the preset radio stations

When radio signals are received, press the + or – (10/M./FOLD.) button.

Each time you press the button, the Preset number and frequency of the radio station are displayed.

MIC jack operation

Microphone input is available in all modes.

Connect your microphone to the 6.3 mm MIC 1 or MIC 2 jack of the unit.
Rotate the MIC VOL. knob on the unit to increase or decrease the volume.

Maintenance

Maintenance of the main unit

Wipe off stains lightly with a soft cloth. If a stain is severe, wipe it off with a cloth dampened with neutral detergent solution and wrung tightly, and dry it with a dry cloth.

Do not use benzene or thinner, etc. Do not spray any volatile chemical such as insecticide on the cabinet.

When you suspect a failure

Phenomenon	Cause	Remedy
No sound is output.

The power plug is disconnected.
The battery is low.
The volume level is low.
The source is not selected properly.

|

Insert the plug fully.
Charge the battery.
Adjust the volume level.
Switch the device to the proper source.

Replay does not start.|

The MP3 file is not playable.

|

Make sure the file is a playable MP3 file.

Device cannot be detected.|

The device is not connected properly.

|

Connect the device properly.

Specifications

USB memory section

Playback format| MP3
Memory| 32 MB to 32 GB
Supported memory| USB1.1 or USB2.0
Playable USB memory| USB-IF certified product
Bluetooth® section
Bluetooth® specification| Ver. 5.0
Wireless equipment classification| Class 2
Supported profile| A2DP, AVRCP
Frequency| 2. 402-2 . 480 GHz (2. 4 GHz ISM segment)
Service distance| Up to 10 m
Terminal
Input/Output| 3.5 mm AUX input jack, 6.3 mm
Microphone input jack × 2
General
Power supply| AC 100-240 V, 50/60 Hz
Power consumption| 38 W
Max. output power| 30 W × 2
Built-in battery| 12 V 4 Ah Lead Acid rechargeable battery
Charging time| Approx. 7 hours
Operating time Bluetooth® music play time| Approx. 5 hours with 80 % volume
Operating time Line-in music play time| Approx. 5 hours with 80 % volume USB
USB port DC output| 5 V, 200 mA
USB CHARGE port| 5 V, 1000 mA
Dimension| Approx.259(W)×260(D)×608(H)mm
Weight| Approx. 8.3 kg
Accessories| AC cord, Wired Microphone Operation manual

Notes

If the device does not operate or display properly while the USB device is played back, press the POWER ON/OFF switch once to turn off the power, and remove the AC cord and connect it again. Then, set the device back to the USB mode and play back the USB device.
The cabinet becomes slightly hot in some parts when the device has been used for a long period of time. It is not a malfunction

Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

LIMITED WARRANTY

USE OF THE DEVICE MEANS YOUR AGREEMENT TO THE TERMS OF THIS WARRANTY. PLEASE READ THIS WARRANTY CAREFULLY BEFORE USING. DO NOT USE THE DEVICE IF YOU DO NOT AGREE TO THE TERMS OF THIS WARRANTY AND RETURN THE UNUSED\ DEVICE TO YOUR RETAILER FOR A REFUND OF THE FUNDS.

This warranty is valid for a period of 2 (Two) years from the date of purchase of the Device. This warranty is in addition to and in no way restricts the constitutional rights of consumers. The warranty service of the Device is carried out only under the condition of strict observance of the operating rules and safety requirements specified in the accompanying documentation for the Device. If during the warranty period any factory defects are found in the Device, they will be eliminated free of charge.

Please refer to the troubleshooting tips at https://service.uniondistribution.eu before starting the procedure for obtaining warranty service. If the troubleshooting tips did not help resolve the issue, follow the online procedure at https://service.uniondistribution.eu or call the customer support service at the phone number for your country of residence at https://service.uniondistribution. eu.

If the company determines that the device malfunctioned under Normal Conditions of Use in accordance with the instructions for use, during the Warranty Period, the company will repair or replace the device or refund the purchase price to you, provided that local laws applicable to you is not provided otherwise.

During the repair, new or re manufactured parts can be used. The device can be replaced with a new or refurbished device. All replaced Devices and / or their components or accessories are the property of the company. Repair or replacement may include installing the latest system or firmware. The replaced component or device is warranted for the greater of three (3) months or the remainder of the original warranty period.