FiiTii HiFiDots True Wireless Earbuds Installation Guide
- June 12, 2024
- FiiTii
Table of Contents
HiFi Dots
Operation guide
Gebrauchsanleitung
Fetch the earbuds
-
Open charging box
Press the button of charging box, its cover will automatically pop up. -
Get earbuds out
Push left to take out the let earbud, Push right to take out the right earbud. -
Put earbuds back into the charging box
A: Align the earphones into the contacts of the. charging box and obliquely put them in.
B: Press the upper port of the earbuds, acbust it austight into the charging box.
Pairing
Open charging box, you will see two earbuds’ LED light flashing, take earbuds
out from charging box simultaneously, when the earbuds have completed the
self-connection between them selves, seeing only 1 earbud’s indicators
flashing, Search HiFi Dots on phone, tap to connect.
Touch control
| L| R
---|---|---
Double-tap| Answer /End call|
Double-tap| Play / Pause music
Press for 1 sec| Mild Noise cancelling Transparency mode Strong noise
cancelling
Tap 5 times| On/Off Low latency mode
| Tap| Volume down|
---|---|---|---
| Triple-tap| Previous track
| Tap| Volume up|
---|---|---|---
| Triple-tap| Next track
PS: The earbuds will automatically turn off if not connected to a device for 10 minutes.
How to reset
Under charging status, continuously tap earbuds key for 5 times to set, earbuds led light will flash 5 times that means reset successfully. Notice : one earbud without sound o there s abnormal situation, please operate as above.
Charging box Indicators
When earlkids insets into the charging box, Power reminder:| Charging case
Under charging statue, Led indicator display: On charging-
---|---
With battery 5-103k LED or for3S| LED flash Flash
Battery low (less than 5%}: LED flash 3S| charged: LED on
Warning and recommendation
Please read this operation guide in details for product safety and correct usage.
-
Loud sounds may cause hearing loss. Maintain a safely listening volume and duration.
‘Consult your physician to understand the appropriate volume and duration to avoid hearing loss. -
please use earbuds and their different functions under proper and safe environment o avoid safety issues.
-
For better and stable connection, please don’t use the earbuds under heavy electromagn noetic nterference or signal nterference environment.
-
Do not use this product while operating a vehicle or heavy machinery.
-
Keep out of reach of children.
-
Not rated for use in dishwasher, laudhy machine, or other cleaning devices.
-
If ear pain or discomfort resulted from the use of this product, please stop using and immediately consult a physician.
-
Do not store at temperatures below -15 degree C (5 degrees F) or above 55 degrees C (131 degree: ).
-
Please clean the charging touch point and speaker driver net regularly to avoid charging problem, diminishing audio caused by grime and earwax build up.
FCC Compliance Statement
“This device complies with Part 15 of the FCC Rules. Operation is subject to
the following wo conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class 8 digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential instalation. This ‘equipment generates uses and
can radiate radio frequency energy and, if not installed and use din
accordance with the instructions, may cause harmful interference to radio
commune-cations. However, there is no guarantee that interference will not
occur in a particular installation. f this equipment does cause harmful
interference to radio o television recaption, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. The
device has been evaluated to mist general RF exposure requirement. The device
can e used in portable exposure condition without restriction.
FCC ID: 248HS HIFPODS
Documents / Resources
|
FiiTii HiFiDots True Wireless
Earbuds
[pdf] Installation Guide
HiFiDots, HiFiDots True Wireless Earbuds, True Wireless Earbuds, Wireless
Earbuds, Earbuds
---|---