MasterPRO BGMP-9128 Touch Multi Cooker Instruction Manual

MasterPRO BGMP-9128 Touch Multi Cooker Instruction Manual

PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USING THE PRODUCT

1. Read these instructions carefully and keep for future reference.
2. Switch off the appliance and disconnect from supply before changing accessories or approaching parts that move in use.
3. Keep body parts, jewelry and loose clothing away from moving parts and fitted tools/attachments.
4. Always remove the blade before pouring contents from the bowl.
5. Keep hands and utensils out of the bowl whilst connected to the power supply.
6. Never use a damaged appliance. Get it checked or repaired.
7. Do not exceed the maximum fill level marked on the inside of the bowl.
8. Never let the power unit, cord or plug get wet.
9. Be careful when handling or touching any part of the appliance when being used in the cook modeor after cooking. In particular the bowl, lid and tools as they will remain HOT long after the appliance has been switched off.
10. Use the handles to remove and carry the bowl. Use oven gloves when handling the hot bowl and hot tools.
11. The underside of the bowl will remain hot long after the heating has stopped. Use caution when handling and use a work surface protection mat when placing the bowl on heat sensitive surfaces.
12. Be careful of steam escaping from the bowl particularly when removing the lid or filler cap.
13. Do not remove the lid or filler cap whilst liquid is boiling.
14. Always close the filler cap when using the chopping function.
15. Only use the bowl and tools supplied with this appliance. Never use the bowl with any other heat source.
16. Never operate the appliance in the cook mode with the bowl empty.
17. Do not use the blender lid to operate the processor. This appliance will be damaged and may cause injury if the interlock mechanism is subjected to excessive force.
18. When using this appliance ensure it is positioned on a level
19. Surface away from the edge. Do not position below overhanging cupboards.
20. For the correct and safe operation ensure that the bowl base and temperature sensors are clean and dry before cooking.
21. CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
22. Always ensure food is thoroughly cooked and is piping hot before eating.
23. Food should be eaten shortly after cooking or allowed to cool quickly and then refrigerated as soon as possible.
24. Misuse of your appliance can result in injury.
25. Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.
26. Children shall not play with the appliance .
27. This appliance shall not be used by children. Keep the appliance and its cord out of reach of children. Never let the cord hang down where a child could grab it.
28. Warning: Be careful when handing the sharp cutting blades ,emptying the bowl and during cleaning .
29. Always disconnect the appliance from the supply if it is left unattended and before assembly, disassembly or cleaning.
30. If the supply cable is damaged, it must be replaced with a special cable assembly available from the manufacturer or its service agent in order to avoid a hazard
31. Only use the appliance for its intended domestic use. We will not accept any liability if the appliance is subject to improper use, or failure to comply with these instructions.
32. The maximum load for blending function was 1200 g carrots / 1800 g water
33. Be careful if hot liquid is poured into the food processor or blender as it can be ejected out of the appliance due to a sudden steaming.
34. The appliance is only to be used with the stand provided.
35. The appliance is for household and indoor use only.
36. Avoid spillage on the connector.
37. Do not disassemble the base of cup (including handle enclosure), it’s not for user maintenance.
38. After the motor stop working ( if it was) , the cooling fan will still keep working for another 2mins
39. Surfaces are liable to get hot during us
40. For how to clean the surfaces in contact with food please refer the paragraph of Care and Cleaning
41. CAUTION :Ensure that the appliance is switched off before removing it from the stand .

BEFORE PLUGGING IN

Make sure your electricity supply is the same as the one shown on the underside of your appliance.

WARNING: THIS APPLIANCE MUST BE EARTHED.

PRODUCT OVERVIEW

PARTS

DISPLAY SCREEN

1. DIY UI
   

2. Auto programs UI
   

3. Recipe UI
   

4. Setup UI
   

5. Home UI
   
   4, KEY PARTS NO.| Name| NO.| Name| NO.| Name| NO.| Name
   ---|---|---|---|---|---|---|---
   1.| Filler cap| 2.| Blender Lid| 3.| Blender lid seal| 4.| Whisk
   5.| Stir paddle| 6.| Blade| 7.| Steam basket| 8.| Blender jug
   9.| Power cord| 10.| Main switch| 11.| Base unit| 12.| Knob
   13.| Display screen| 14.| Spatula| 15.| Measuring cup| 16.| Seal of deep steamer basket
   17.| Steamer basket, deep| 18.| Steamer basket, shallow| 19.| Lid for steamer basket| 20.| Driving shaft
   21/21A.| Slicer / shred| 22.| Seal for FP lid| 23.| FP lid| 24.| Pusher
   25.| Temperature Button| 26.| Timer Button| 27.| Speed Button| 28.| Star/Pause/Stop Button
   29.| Interface shift dot| 30.| Setup Button| 31.| Home Button| 32.| Weight Button
   33.| Function Button| 34.| Sort management| 35.| A-Z| 36.| Search Button
   37.| More Button| 38.| A-Z button| 39.| Setup UI| 40.| Recipes UI
   41.| DIY UI| 42.| Auto program UI| 43.| Download UI| |

TO SET-UP BEFORE USE

1. Place the drive shaft correctly locked into the jug .
   

2. Insert the Jug into the Main Unit .Press down firmly to lock into place . (LOGO in front),Max in back

3. Choose difference accessories for difference cooking purpose .
   

4. Add the ingredients or water to the jug .If need food processor function . Then you need to attach food processor lid and put ingredients directly through the lid hole

5.  Attach the Blend lid, or food processor lid or Steamer.

6. Plug your Power cord into the main base then, Switch on
   

7. Slide the corresponding icon or rotate the knob to set the temperature, time and speeds. Click the minute or second in the time icon to quickly set the exact time. Reverse function: Click the icon  for shift rotating direction

8. Click after set the temperature, time and speed to start, then the icon will change to , the machine is working now.
   Click  or push button in knob to pause working, click or continuously press the push button in knob to stop working and exit the program
   
   

9. By sliding right direction in screen or click the right dot in red circle or turn the knob in clockwise to go to common function menu. Click the or click the middle dot in red circle to go back to the initial step for reset.
   
   

10.  Click the function icon in common function menu to go to the corresponding screen interface. Start working after completing the step 7 and 8. Click to exit this interface. This icon is for steaming.

11. By sliding left in screen or click the left dot in red circle or turn the knob in anticlockwise to go to recipe menu. Click the or click  the middle dot in red circle to go back to the initial step reset.
    

12. Click the recipe photo, enter into recipe interface, click to check all the recipe details. Click to start and for favorite collection.

13. The recipe has preset parameter. Click to start. The number in red circle stand for each working step, click to check all the recipe details.
    

14. After cooking ,Screen will shows end .Press the rotary knob and it will stop cooking .If you want to suspend during cooking .Press the rotary knob . Then press again and the cooker will continue cooking . The cooker will stop cooking if you long press the rotary knob.

15. Blender jug can be washed by dry dishcloth or wash it with water, But do not immersed in water ; Do not put it into the dish-washing machine
    

16.  Accessories which can put into dishwasher.

17. Clean the main unit

CONTROL PANEL OVERVIEW

1. Can be used to setting temperature ,time, speed ;or UI，Auto program, recipe.
2. Press the knob and the cooker will suspend when cooking .It will continue cooking if your press again. Or confirm your choice.
3. Long push the knob and the cooker will stop cooking .
4. Press the knob after finish all setting and the cooking will start cooking .
5. It will automatically cancel if you long push the knob during setting .
6. When finish cooking ,Press the knob and the cooker will into standby mode .

27.1| | ReverseThe speed rang:1-3
27.2| | Speed: Clickto shift between clockwise and reverse Speed range：0-12
26| | Display set time parameter:0-90 minute Operation time display: 0-90 minute
25.1| | Display set temp parameterTemp rang: 37-120℃After 37, 40℃, in intervals of 5°
25.2| | Close / Open Icon
25.3| | Food / ingredients temp, After 37, 40℃, in intervals of 5°
28| | __ Start,        Pause,      Stop Button
30| | Setup Button: set or check robot cook info including: Wifi, System version, Language ,etc.
31| | Home Button: Home page
---|---|---
32| | Weight button
33.1| | Knead Time: 3 (Range:2-4) minutes Temp:000(Range:000-37) ℃Speed: 1(Range:1-2)
33.2| | Steam Time: 20 (Range:1-60)minutes Steam flow：Fast/Medium/Slow Time count down starts from 95℃
33.3| | Slow Cook Time: 60(Range:10-90)minutes Temp:100(Range:60-100) ℃Speed: 1(Range:1-3)
33.4| | Boil Temp:100(Range: 60-100) ℃
33.5| | Food Processor Time ： 30(Range:10-60)secondsSpeed: 5(Range:4-6)
33.6| | Chop Time：10s(Range:10s-4m) Speed:6(Range:1-12)

---|---|---
33.7| | Turbo Time：60s Speed: 12
Press or Press Knob and release to stop

33.8| | Weigh Max：5Kgs 5g interval

33.8.1| | Tare
33.8.2| | End weighing
34| | Sort management
35| | A-Z
36| | Search
37| | More Including favorite collection and history
44| | Exit
45| | Favorite / History
---|---|---
46| | Ingredients Picot
47| | Cooking step
48| | Chef’s tips
49| | Accessories Picto
50| | Check recipe info including

SETTING THE TIME

1. Time range：0-90minutes
2. Click , click min or sec, slide or rotate the knob to set time

SETTING THE TEMPERATURE

1. Temperature range: 37-130℃，with 5℃ interval
2. Click   slide the picto or rotate the knob to set the temp

SETTING THE SPEED

1. Speed range: 0-12
2. Click , slide the picto or rotate the knob to set the speed
3. Click , shift to , with speed setting 1-3
4. Speed 1-3: Speed 1-4: Speed 1-12:

START,PAUSE AND STOP

1. Start 
2. Pause
3. Stop

During standby mode,white and red lights flash. Red light underneath Knob is on when temperature is beyond 60℃, and white light is on when temperature is below 60℃, at any working mode.

SUGGESTED USAGE

Method

Function| Accessory| Speed| Time| Maximum cooking ingredients in one time
CF-2006/CF-2006FP
Meat Chopping| Chopping Blade| Speed 8-12| 30s-60s| 600g Beef / pork without bone / tendon
Ice Crush| Chopping Blade| Speed 8-12| 10s-20s| 600g Ice cube
Blender| Chopping Blade| Speed 12| 1 min| Maximum Capacity: 2300ml 920g carrot 1380g water
Chopping( Onion, Shallot, Celery.etc)| Chopping Blade| Speed 5| 15s-30s| 500g
Kneading| Chopping Blade| Speed 1| 2 mins| 500g flour + 250g water + 20g oil
Slices ,Shreds (Carrot, Cucumber, Potato)| Slices discs| Speed 5-6| 30s| 500g
Soup| Stir paddle| Speed 1| Choose Soup function. Or you can setting the proper time , speed, temperature by your own.| Maximum Capacity3000ml

CARE AND CLEANING

1. Always switch off and unplug before cleaning.
2. Remove the lid and tool from the bowl before cleaning.
3. Power unit. Wipe with a damp cloth, then dry. Never use abrasives or immerse in water
4. When there is burn mark on blender jug bottom, put some citric acid or lemons into water, heat 5~7 minutes, then remove the burn mark with a mop
5. Bowl/stirring paddle/blade. Wash the parts, then dry thoroughly. If food sticks or burns on the inside of the bowl, remove as much as possible using a spatula. Fill the bowl with warm soapy water and allow to soak. Remove any stubborn deposits using a cleaning brush. Any discoloration of the bowl will not affect its performance.
6. How to take out steam basket Put measuring cup into steam basket slot and rotate to fix. Then, take out.

CLEANING AND MAINTENANCE

Please unplug the power cord before cleaning ；

Please use dry and soft cloth to clean power cord .

Please use dry dishcloth to clean the main unit .Do not wash them with water or put it into the dish-washing machine .

Lid ,Measuring cup , Blade ,Mixing paddle , Steam basket, Steamer . etc .all above photo accessories can be washed by dish-washing machine .

Blender jug can be washed by dry dishcloth or wash it with water, But do not immersed in water ;Do not put it into the dish-washing machine.

Metal brush ,nylon brush ,household cleaner, diluent, cleaning products will damage the surface of product structure.

PRODUCT SPECIFICATION

RESET TEMPERATURE

When over temperature the Jug does not work , you can Press the thermostat button on the bottom of jug to reset temperature, after cooling the Jug ,the Jug can work.

ACCESSORIES OVERVIEW

Disposal of Old Electrical & Electronic Equipment ( Applicable in the European Union and other European countries with separate collection systems )
This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please cantact your local city office, your household waste disposal service or the shop where you purchased the product.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>