antc CS-H200W Mercury Wireless Headphones User Manual

antc CS-H200W Mercury Wireless Headphones

Important Safety Warning

1. These precautions must be read, retained, and followed, and all warnings must be heeded.
2. Use a dry cleaning cloth to wipe the earphones. Do not use the earphones near the water. If water or other foreign matter enters the headphones, it may cause the headphones to malfunction.
3. Do not install these headphones near any heat source, such as radiators, thermostats, microwave ovens, stoves, or other devices that may generate heat (including power amplifiers). Keep your headphones dry and avoid exposure to high temperatures and humidity.
4. Protect the charging cable from being stepped on or pinched, especially at the plug, socket and where the charging cable exits. Do not use excessive force and do not pull the charging cable, otherwise the charging cable will be damaged.
5. Only use connection parts/accessories specified by the manufacturer.
6. In lightning weather or when not in use for a long time, the charging plug should be unplugged.
7. Do not try to modify these headphones. Doing so could result in personal injury and/or product failure. Follow the manufacturer’s instructions.
8. Improper use of headphones may cause product battery damage, bulging, explosion, and risk of fire, burns, and release of toxic and harmful substances. Do not open, squeeze, modify, disassemble or heat above 60’C (140’F) or incinerate the battery. Environmental factors should be considered when handling batteries, and the product should not be exposed to sunlight, fire, or other similar high-temperature environments.
9. Do not use these headphones in environments where inaudible surrounding sounds may be dangerous (such as driving, riding a bicycle, walking or jogging in the presence of vehicles) and in situations where an accident may occur. Please obey applicable laws regarding cell phone and headphones use while driving.
10. This headset and its accessories should be placed out of the reach of children. There may be a risk of injury from children playing or using this headset and accessories. The small parts and cables included with the product present a choking or strangulation hazard.
11. If you are currently undergoing hearing or surgical treatment, please ask your treating doctor before using these headphones. This product contains magnetic materials, please consult your doctor about whether it may affect your implantable medical devices. If you experience irritation, excess earwax, or other discomfort, stop using your headphones and consult a medical professional. To prevent possible hearing damage, do not listen at high volume for long periods of time.

Minimalism Style Design· Return Real Sound
CS-H200W Wireless Headphones (Mercury) rely on the company’s R&D team’s rich experience in creating headphones for recording studio professionals. It uses high-quality materials and fine craftsmanship to ensure users are comfortable to wear while meeting the needs of an immersive experience. The product adopts a simple shape and clever design, with easy button operation and practical product functions. It optimizes the interactive experience and listening experience, and embodies the design concept of “reducing complexity to simplicity and restoring true sound”. The specially developed 50mm dynamic speaker unit can provide sound quality comparable to that of a recording studio, pursue natural and realistic sound effects, and elevate the listening experience to a new level.CS-H200W Wireless Headphones (Mercury) adopt Joining’s new spatial audio technology, which follows recording technology, monitoring technology and sound restoration technology to expand the sound field, enhance the sense of sound space, and pursue the live effect of a concert hall.

Three scene modes

• Music mode: Optimize the sound quality of songs and music, reproduce high-quality listening effects, and bring users a rich sense of auditory layering.
• Cinema mode: By enhancing the sound effects and extending the sound field, it presents shocking bass and creates a majestic atmosphere, as if you are in a theater.
• Transparency mode: Presents more natural and realistic sound to your ears.

Special Design
For passionate music enthusiasts and moviegoers, the smallest sound details also contain irresistible charm. In Mercury wireless headphones, perfectly matched high-quality speaker units, carefully designed acoustic cavity structures and acoustic damping, combined with new digital signal processing (DSP) technology, ensure users a pure high-resolution listening experience. Users can select modes according to usage scenarios and experience different listening experiences.

• The headphones adopt new environmental noise reduction technology, making the call sound clear and discernible, avoiding external noise interference.
• The headphones adopt a low-power circuit design and a large-capacity battery to achieve 60 hours of battery life, avoiding the trouble of no power. Under healthy listening conditions, it can be used for a week after charging once.
• The headphones retain the 3.5mm stereo interface design and are equipped with high-qual­ ity audio cables, providing a choice for wired listening enthusiasts. The headphones use replaceable earpads. Users can choose different earpads and replace them very conveniently to experience more sound effects and wearing experience. It is also easy to clean, eliminating the trouble of dirt and earmuff damage.
• The packaging is simple, and the storage bag is convenient and practical, avoiding excessive packaging, following low-carbon design, and reducing energy consumption and environmental damage.

Function

Bluetooth Pairing

Turn the earphone power button to the power on position, and the blue light will flash slowly to enter pairing Mode, open the Bluetooth on the phone to search for the Bluetooth name: CS-H200W, Click on the Bluetooth name to connect,the blue light will turn off O. After shutting down, the power will automatically turn on Connect back to the originally connected device.

Manual Pairing
When the earphones are turned on or connected, toggle the switch to the Bluetooth pairing position and bounce back to the power-on position to enter manual pairing mode. The blue light flashes slowly , search for the Bluetooth name and click connect.

3.5mm Audio Cable Use
After inserting a 3.5mm audio cable, the Bluetooth function of the earphones will automatically turn off, and the earphones can be used as wired earphones.

Charging
The USB-C to USB-A cable provided is only for charging purposes.

When charging: the red light is always on and the blue light is bright when fully charged . CS-H200W (Mercury)

CS-H200(Mercury) Main Parameters:

• Headphone Unit: <ll50mm, 380 High-Quality Speaker
• Headphone Sensitivity: 106dBSPL@lkHz
• Frequency Response Range: 16Hz-40KHz
• Battery Capacity: l000mAh
• Music Play: 60h
• Data Cable: USB-C
• Net Weight: 320g

Packing List:

• CS-H200W Headphones (Mercury): xl
• 3.5mm Audio Cable: xl
• User Manual: xl
• Storage Bag: xl
• USB-C Charging Cable: xl

Certification:
Please visit www.joiningfree.com for the latest regulatory and compliance information.

NOTE: Usage is with the supplied and recommended cable types. Using unshielded types of connecting cables may reduce electromagnetic compatibility performance. This product complies with the essential requirements of all relevant EU directives and is permitted to use the CE mark.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Statement according toFccpart lS.19:
This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept anyinterference received, including interference that may cause undesired operation.

Applicable Standards: GB/r 14471-2013, GB8898-20ll, GB4943.l-2022, GB13837-2012, GB17625.l-2012

Limited Warranty:

1. This warranty card is only applicable within Mainland China.
2. The warranty service can only be enjoyed by presenting both this card and the corresponding purchase proof.
3. The final interpretation rights of this warranty card belong to Shenzhen Joiningfree Technology Co., Ltd.

Warranty conditions:

1. Within 7 days from the date of purchase, if it is not damaged by human factors and has not been disassembled or repaired, it can be enjoyed the replacement service due to quality issues. This replacement service is only for headphones and does not include accessories.
2. Within one year from the date of purchase, without disassembly or repair, you can enjoy warranty service.
3. This warranty does not cover all damages caused by human factors (such as user disassembly, improper connection, not used according to instructions, damaged due to transportation and other accidents, not recognized by our company repairs and modifica­tions, product water ingress, cracking, and accessories exceeding the warranty period , etc.) are not included in the free warranty scope.
4. This repair service does not include transportation costs and does not provide on-site service.
5. Shenzhen Joining Free Technology Co., Ltd. will charge for any additional services beyond the warranty scope, Payment should be made.

Name and content of harmful substances in the product:

The numbers inside this label indicate that the environmental protection service life of the product under normal use is 20 years, Some components may also have environmentally friendly service life labels, and their environmentally friendly service life is based on the numbers inside the label.

PR: MERCURY WIRELESS HEADPHONES
PML: CS-H200W
MFGR: Shenzhen Joining Free Technology Co., Ltd.
ADD: 16F, Block C, Qifengda Building, Taohuayuan Technology Park, Furong Road,Songgang. Baoan District, Shenzhen, China, 518105
www.joiningfree.com
marketing@joiningfree.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>