MasterPRO BGMP-9089 Cordless Water Kettle Instruction Manual

**MasterPRO BGMP-9089 Cordless Water Kettle Instruction Manual

**

OVERVIEW OF THE COMPONENTS

1. Hinged Lid
2. ON/OFF Switch
3. Light
4. Power Base

AC220-240V, 50Hz/60Hz, 1850W

IMPORTANT SAFEGUARD

Before using the electrical appliance, the following basic precautions should always be followed including the following:

1. The appliance is designed exclusively for private use and for the envisaged purpose. This appliance is not fit for commercial use. Do not use it outdoors (except if it is designed to be used outdoors). Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges. Do not use the appliance with wet hands. If the appliance is humid or wet, unplug it immediately. Do not put it in water.
2. When cleaning or putting it away, switch off the appliance and always pull out the plug from the socket if the appliance is not being used and remove the attached accessories.
3. Do not operate the machine without supervision. If you should leave the workplace, always switch the machine off or remove the plug from the socket.
4. Check the appliance and the cable for damage on a regular basis. Do not use the appliance if it is damaged.
5. Do not try to repair the appliance on your own. Always contact an authorized technician. To avoid the exposure to danger, always have a faulty cable be replaced only by the manufacturer, by our customer service or by a qualified person and with a cable of the same type.
6. Use only original spare parts.
7. In order to ensure your children‘s safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) out of their reach. Caution! Do not allow small children to play with the foil as there is a danger of suffocation!
8. To protect children from the dangers posed by electrical appliances, make sure that the cable is hanging low and that children do not have access to the appliance.
9. Do not overfill as boiling water may be ejected. The maximum level is marked inside the kettle.
10. To avoid scalding, always ensure the lid is correctly positioned before operating.
11. Scalding may occur if the lid is removed whilst heating.
12. Do not use the kettle for any purpose other than heating water. Other liquids or food will contaminate the interior.

INITIAL OPERATION

1. Before first use, fill the kettle with clean water to maximum capacity and boil. discard the water and repeat.
2. The kettle should always be unplugged when filling or adding water.
3. Fill the kettle with water to the desired level. Do not overfill or there will be a risk of spillage or spitting. Do not forget to close the lid after filling, otherwise the kettle will not automatically switch off after use.
4. Do not fill with less than 0,5 liter of water (up to „MIN“ indication) to prevent the kettle running dry while operating.
5. Do not fill with more than 1,7 liters of water (up to „MAX“ indication).
6. An automatic safety cut-out has been fitted for protection against overheating. It will operate if the kettle is switched on when containing insufficient water. Always ensure that the water inside the kettle covers the minimum mark. If the automatic safety cut-out has operated, disconnect from the power outlet and allow the kettle to cool down for 5 to 10 minutes. Then refill with water and switch on – the kettle will then boil and cut off as in normal operation.
7. Place the power base on a dry flat surface.
8. Place the kettle on the power base. The electrical connections will be made automatically as the kettle slides onto the power base.
9. Plug the cord set into an earthed power socket.
10. The appliance is switched on by pressing the ON/OFF switch. The pilot light will come on
11. When the water has boiled, the kettle will switch off automatically.
12. Do not remove the kettle from the power base without switching off first.
13. To pour water, lift the kettle from the power base and pour.

CLEANING

Wipe the exterior of the kettle with a soft, damp cloth or sponge. Remove stubborn spots with a cloth moistened with mild liquid detergent. Do not use abrasive scouring pads or powders. Never immerse the kettle in water or other liquids.
From time to time depending on the nature of your water supply, a lime scale deposit is naturally formed and can be found mostly adhered to the heating element and reduces the heating capacity.
The amount of lime scale deposited (and subsequently the need to clean or decaled) largely depends on the water hardness in your area and the frequency with which the kettle is used.
Lime scale is not harmful to your health. But if poured into your beverage, it can give a powdery taste to your drink.

DESCALING$

Descaled the kettle regularly. With normal use, at least twice a year.

1. Fill the kettle up to „MAX“ with a mixture of one part ordinary vinegar and two parts water. Switch on and wait for the appliance to switch off automatically.
2. Let the mixture remain inside the kettle overnight.
3. Throw the mixture away next morning.
4. Fill the kettle with clean water up to „MAX“ and boil again.
5. Throw away this boiled water to remove any remaining scale and vinegar.
6. Rinse the inside of the kettle with clean water.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>