DOPO 918A-L0103L Portable Lamp Instructions
- June 3, 2024
- DOPO
Table of Contents
DOPO 918A-L0103L Portable Lamp Instructions
Product Description
Adaptador
Battery
| Charging time | Full load duration |
|---|---|
| 5/7 h | >8 h |
Polycarbonate
Should the glass break, the product cannot be used and you should contact
the manufacturer for its replacement.
Safety Instructions
- The safety of this luminaire is guaranteed only if you comply with these instructions; remember to conserve in a safe place.
- The battery for this luminaire is not replaceable by user.
- Do not use alcohol or other solvents.
- In order to extend the life of the battery it’s recommended to regularly charge it.
- The installation should be carried out by qualified personnel.
- The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
Do Not touch LED!
- Suitable for indoor and outdoor use, taking the indicated IP rating into consideration.
- Electrical appliances must only be connected by competent persons.
- Important! Before commencing installation work disconnect the mains cable from the power supply – remove fuse or turn switch to “OFF”! The power supply connection must be done with the suitable connecting box, asseen on illustrations.
- Thisluminaire is only suitable for use in living areas(not for areas subject to moisture) and may be used only in accordance with its particular design. The maximum permissible ambient temperature is 25°C.
- Do not attach luminairesto surfaces which are damp, freshly painted, or otherwise electrically conductive.
- Connect the wires of the luminaire to the wires of the same colour that come from the wall or ceiling.
- Use support systemsthat are in accordance to the weight of the luminaire.
- Keep the wires and connections separated from any heat source.
- To avoid damage to concealed wiring during installation, establish the direction of the supply cable before drilling fixing holes.
- Keep these instructionsin a safe place.
- Use sleevesto cover the mainssupply wiring to the fitting.
- Cleaning islimited to the outer surfaces, shades or protective glass, reflectors and covers. Gold-finish and brassluminaires must be only be cleaned with a soft cloth (do not use cleaning agents of any kind). It isimportant to ensure that no moisture entersthe terminal compartment or reaches any live parts!
- As our products are subject to technical modifications, we cannot guarantee, that all information is always up to date. Please contact our technical department with any queries.
- (Type Y) If the external flexible cable or cord of thisluminaire is damaged, it shall be exclusively replaced by the manufacturer or hisservice agent or a similar qualified person in order to avoid a hazard.
- Do not coverthe luminaires with insulating material.
- Do not use luminaries with frayed or cracked glass, until it is replaced
- Not hang or supporting elements on the luminaires.
- If the flexible cable or cord of thisluminaire is damaged, it should be be replaced only by the manufacturer or itsservice or equivalent qualified or a person of equivalent qualification in order to avoid any risk.
Instructions
Use only the supplied adaptor to charge the luminaire.
The product is not suitable to operate during the loading operation.
SYMBOLOGY
| Protection class I: This luminaire has an earth terminal.
---|---
| Protection class II: This luminaire is doubly insulated and must not be
connected to and earth wire.
| Protection class III: Luminaire for protective low voltage (SELV)
| Minimum distance from lighted objects
| Low pressure: For luminaries which are designed for use with self-shielded
tungsten halogen lamps only.
| Recessed luminaire not suitable for direct mounting on normally flammable
surfaces
| Surface luminaire not suitable for direct mounting on normally flammable
surfaces
| Luminaires not suitable for covering with thermally insulating material
| Replace any cracked protective Shield
| Where affixed on the equipment or package, the barred waste bin sign
indicates that the product must be separated from other waste at the end of
its working life for disposal.
| Replaceable control gear by a professional.
Replaceable control gear by an end-user
Non-replaceable control gear
Repleaceble light source by a professional
Repleaceble light source by an end-user.
Non-repleaceable light source
SUPPLY CONNECTION
Dust-tight and protected againts splashing of water.
Support
NOVOLUX Lighting, SL.
C/ Ramón Berenguer, 8 (Polígono Industrial Can Vinyals)
08130 Sta. Perpetua de Mogoda – BARCELONA – España/Spain/Espagne
ESPAÑA- PORTUGAL: Tel. +93 274 52 52
E-mail: info@novoluxlighting.com
REST OF THE WORLD: Phone +34 93 516 20 05
E-mail: export@novoluxlighting.com
Fax +34 933 463 751 / 933 114 546
www.novoluxlighting.com
