EUROfase 38097 Aerie 7 Light Bronze-Gold Round Chandelier Instruction Manual
- June 12, 2024
- EUROfase
Table of Contents
EUROfase 38097 Aerie 7 Light Bronze-Gold Round Chandelier
Product Information
- Product Model: 38097
- Product Type: Lighting
- Power Specifications: 42W MAX, LED, 120V, 60Hz
- Dimmable: Yes
Product Usage Instructions
- Estimated Assembly Time: 20 minutes
- Tools Required For Assembly (not included):
- Flathead screwdriver
- Phillips screwdriver
- Pliers
- Electrical tape
- Wire cutters
- Helpful Tools (not included):
- Wire strippers
- Ladder
- Follow these steps to assemble the product:
- Secure the outlet box by using the provided screws (A).
- Connect the black wire (L) from the junction box (B) to the black wire (L) from the fixture (E).
- Connect the white wire (N) from the junction box (C) to the white wire (N) from the fixture (F).
- Connect the green wire/bare copper (G) from the junction box (D) to the green wire/bare copper from the fixture (G).
- Secure the connections with wire connectors (H).
Please refer to the provided manual for any additional instructions or troubleshooting information.
INSTRUCTIONS
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
- Follow the assembly instructions by reading the numerical progression.
- Use a qualified electrician for installation of this lighting fixture.
- Before installing fixture, disconnect power by turning off the circuit breaker or by removing the fuse at the fuse box.
- All electrical connections must be in accordance with local and National Electrical Code or Canadian Electrical Code standards.
- Use CSA or UL listed wire connectors suitable for the gauge, type and number of conductors.
- Attach junction box grounding wire (green or bare copper) and the bare copper wire from the fixture together. If junction box has no ground wire, attach the bare copper fixture wire to the green ground screw on the crossbar.
- Estimated Assembly Time: 20 minutes
Tools Required For Assembly (not included):
- Flathead screwdriver
- Phillips screwdriver
- Pliers
- Electrical tape
- Wire cutters.
Helpful Tools (not included):
- Wire strippers
- Ladder
DESCRIPTION
42W MAX, LED, 120V, 60Hz (Dimmable LED Included)
- A- Outlet Box screw x 2
- B- Black wire(L) from junction box
- C- White wire(N) from junction box
- D- Green wire/Bare copper (G) from junction box
- E- Black wire (L) from fixture
- F- White wire (N) from fixture
- G- Green wire/Bare copper from fixture
- H- Wire connector x 3
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>