MEAN WELL HBG-240-24 Series 240W Constant Voltage Constant Current LED Driver Owner’s Manual

240W Constant Voltage + Constant Current LED Driver

Features

• Constant Voltage + Constant Current mode output
• Circular metal housing with class I design
• Built-in active PFC function
• P67 / IP65 rating for indoor or outdoor installations
• Function options: output adjustable via potentiometer; 3 in 1 dimming; DAL!
• Typical lifetime>50000 hours
• 5 years warranty

 Applications

• LED bay lighting
• LED stage lighting
• LED spot lighting

GTIN CODE

MW Search: hitps:/’www.meanwell.com/serviceGTIN.aspx

Description

HBG-240 series is a240W AC/DC LED driver featuring the circular shape design. It operates from 90~305VAC and offers the dual modes constant voltage and constant current output models with different rated voltage between 24Vand 60V. Thanks to the high efficiency up to 93.5%,with the fanless design, the entire series is able to operate for -40°C ~ +75°C case temperature under free air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications. HBG-240 is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system.

Model Encoding

Stock
AB| IP65| Io adjustable through built-in potentiometer with 3 in 1 dimming function| In Stock
DA| IP67| DALI control technology.| In Stock

SPECIFICATION

OUTPUT

| DC VOLTAGE| 24V| 36V| 48V| 60V
CONSTANT CURRENT REGION Note.2| 14.4 ~ 24V| 21.6 ~ 36V| 28.8 ~ 48V| 36 ~ 60V
CONSTANT CURRENT REGION

(for DA Type only)

|

16.8 ~ 24V

|

25.2 ~ 36V

|

33.6 ~ 48V

|

42 ~ 60V

RATED CURRENT| 10A| 6.7A| 5A| 4.0A
RATED POWER| Note.5| 240W| 240W| 240W| 240W
RIPPLE & NOISE (max.) Note.3| 150mVp-p| 250mVp-p| 250mVp-p| 350mVp-p

CURRENT ADJ. RANGE

| Adjustable for A/AB-Type (via built-in potentiometer)
6 ~ 10A| 4.0 ~ 6.7A| 3 ~ 5A| 2.4 ~ 4.0A
VOLTAGE TOLERANCE Note.4| ±2.0%
LINE REGULATION| ±0.5%
LOAD REGULATION| ±0.5%
SETUP, RISE TIME| Note.6| 500ms,120ms /230VAC      2500ms,120ms /115VAC
HOLD UP TIME (Typ.)| 15ms /115VAC, 230VAC

INPUT

|

VOLTAGE RANGE

|

Note.5

| 90 ~ 305VAC        127 ~ 431VDC

(Please refer to “STATIC CHARACTERISTIC” section)

FREQUENCY RANGE| 47 ~ 63Hz

POWER FACTOR

| PF>0.98/115VAC, PF>0.95/230VAC, PF>0.93/277VAC@full load

(Please refer to “POWER FACTOR (PF) CHARACTERISTIC” section)

TOTAL HARMONIC DISTORTION

| THD< 20%(@load≧60%/115VC,230VAC; @load≧80%/277VAC)

(Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)

EFFICIENCY (Typ.)| Note.7| 92.5%| 92.5%| 93%| 93.5%
AC CURRENT (Typ.)| 2.5A / 115VAC        1.3A / 230VAC        1.2A / 277VAC
INRUSH CURRENT (Typ.)| COLD START 75A(twidth=680μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
MAX. No. of PSUs on 16A

CIRCUIT BREAKER

| 2 units (circuit breaker of type B) / 3 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT| <0.75mA / 277VAC
NO LOAD / STANDBY POWER CONSUMPTION| Standby power consumption <0.5W for B/AB/DA-Type Blank/A-Type please refer to Note.9

PROTECTION

| OVER CURRENT| 95 ~ 108%
Constant current limiting, recovers automatically after fault condition is removed
SHORT CIRCUIT| Hiccup mode, recovers automatically after fault condition is removed

OVER VOLTAGE

| 27 ~ 34V| 43 ~ 52V| 52 ~ 63V| 62 ~ 85V
Shut down and latch off o/p voltage, re-power on to recover
OVER TEMPERATURE| Shut down o/p voltage, recovers automatically after temperature goes down

ENVIRONMENT

| WORKING TEMP.| Tcase=-40 ~ +75℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)
MAX. CASE TEMP.| Tcase=+75℃
WORKING HUMIDITY| 20 ~ 95% RH non-condensing
STORAGE TEMP., HUMIDITY| -40 ~ +80℃, 10 ~ 95% RH
TEMP. COEFFICIENT| ±0.03%/℃ (0 ~ 50℃)
VIBRATION| 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes

SAFETY & **EMC**

|

SAFETY STANDARDS

| UL8750,CSA C22.2 No.250.13-12, ENEC BS EN/EN61347-1, BS EN/EN61347-2-13 independent, BS EN/EN62384;GB19510.1, GB19510.14, BIS IS15885(for 48A,60A only), EAC TP TC 004, IP65 or IP67 approved
DALI STANDARDS| Compliance to IEC62386-101, 102, 207 for DA-Type only
WITHSTAND VOLTAGE| I/P-O/P:3.75KVAC  I/P-FG:2KVAC  O/P-FG:0.5KVAC
ISOLATION RESISTANCE| I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION|

Note.9

| Compliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C (@load≧75%) ; BS EN/EN61000-3-3, GB17743 and GB17625.1, EAC TP TC 020
EMC IMMUNITY| Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61547,light industry level (surge immunity:Line-Earth:4KV, Line- Line:2KV), EAC TP TC 020

OTHERS

| MTBF| 1792.9K hrs min.     Telcordia SR-332 (Bellcore) ;172.4K hrs min.| MIL-HDBK-217F (25℃)|
DIMENSION| ψ191.5mm 69mm (D H)
PACKING| 2.1Kg; 8pcs/18.3Kg/2.09CUFT
NOTE| 1.  All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25℃ of ambient temperature.

2.  Please refer to “DRIVING METHODS OF LED MODULE”.

3.  Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

4.  Tolerance : includes set up tolerance, line regulation and load regulation.

5.  De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.

6.  Length of set up time is measured at cold first start. Turning ON/OFF the driver may lead to increase of the set up time.

7.  The DA type power supply is less efficient than the A type power supply by 1%.

8.  The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.

9.  To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED driver can only be used behind a switch without permanently connected to the mains.

10.  This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 70℃ or less.

11.  Please refer to the warranty statement on MEAN WELL’s website at http://www.meanwell.com

12.  The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).

13.  For any application note and IP water proof function installation caution, please refer our user manual before using.

https://www.meanwell.com/Upload/PDF/LED_EN.pdf

※ Product Liability Disclaimer：For detailed information, please refer to https://[www.meanwell.com/serviceDisclaimer.aspx](http://www.meanwell.com/serviceDisclaimer.aspx)

 |  | | Downloaded from Arrow.com.

BLOCK DIAGRAM

DRIVING METHODS OF LED MODULE
※ This series is able to work in either Constant Current mode (a direct drive way) or Constant Voltage mode (usually through additional DC/DC driver) to drive the LEDs.

DIMMING OPERATION

※ 3 in 1 dimming function (for B/AB-Type)

• Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-: 1 ~ 10VDC, or 10V PWM signal or resistance.
• Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers.
• Dimming source current from power supply: 100 μA (typ.)
  ◎ Applying additive 1 ~ 10VDC
  Note: In the case of turning the lighting fixture down to 0% brightness, please refer to the configuration as follow, or please contact MEAN WELL for other options.

Using a switch and relay can turn ON/OFF the lighting fixture.
※ DALI Interface (primary side; for DA-Type)

• Apply DALI signal between DA+ and DA-.
• DALI protocol comprises 16 groups and 64 addresses.
• First step is fixed at 8% of output.

OUTPUT LOAD vs TEMPERATURE(Note.11)

STATIC CHARACTERISTIC

TOTAL HARMONIC DISTORTION (THD)

POWER FACTOR (PF) CHARACTERISTIC

EFFICIENCY vs LOAD
HBG-240 series possess superior working efficiency that up to 93% can be reached in field applications.
※ 48V Model, Tcase at 65℃

LIFE TIME

MECHANICAL SPECIFICATION

※ AB-Type

INSTALLATIONS

Caution

• Please inspect the appearance of the driver if the package is damaged. There should notbe any cracks.
• Please do not drop or bump the driver.
• All screws including the suspension screw should be paired with a spring washer and locked tight.
• The entire luminaire, including the driver, should be limited to 15Kg or less.
• The luminaire should be cautiously protected from damage due to shock throughout packaging and transportation.
• Please thoroughly follow the preceding cautionary notes to prevent the luminaire from falling, leading to injuries.

Downloaded from Arrow.com.

http://www.meanwell.com.cn/Upload/PDF/LED_EN.pdf


File Name:HBG-240-SPEC 2022-03-16

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>