PRO DUNK Backstop Net Installation Guide
- June 12, 2024
- PRO DUNK
Table of Contents
PRO DUNK Backstop Net
Product Information
The Backstop Net is a high-quality product designed to provide a safe and enjoyable experience for basketball players. It is manufactured with attention to detail and is free from defects or missing parts.
The product includes the following components:
- A Net
- 2 Female + Male Fiberglass Poles
- 2 Male Fiberglass Poles
- Main Pole Mount Bracket
- 2 10mm x 3cm Hex Bolts
- 2 10mm Flat Washers
- 2 10mm Lock Washers
- 6 Metal Ground Stakes
Please note that all necessary parts and components for proper installation are included. It is important to use only the provided parts to avoid product malfunction and voiding the warranty.
Product Usage Instructions
- Read the entire manual before starting assembly.
- Ensure that the work area is free from hazards.
- Use the provided Crescent Wrenches as the required tool.
- Follow the bracket installation steps using the provided hardware to attach the Pole Bracket to the back of the main pole.
- Refer to the model-specific instructions for mounting the bracket correctly (APOLLO, HERCULES, or THOR).
- Assemble the poles by connecting one pole with a female end and male end, and one pole with just a male end. Repeat this step for the second set of poles.
- Slide both sets of poles through the top of the net sleeves.
- Attach the poles to the Main Pole Mount Bracket by screwing each side of the net into the bracket.
For any maintenance or repairs, it is recommended to contact a professional installer. Safety instructions should be followed at all times to prevent product malfunction, serious injury, or death. Keep this installation manual as a reference for safety.
Additional copies of the safety instructions can be obtained by calling customer service at 1-888-600-8545 or visiting www.produnk.com/support.
For ordering parts, visit www.produnk.com/parts.
Thank you for purchasing our Backstop Net. We try hard to ensure that our prod-ucts are of high quality and free of manufacturing defects and of missing parts. However, if you have any problems with your Backstop Net, such as a manufac-
- Toll Free: 1.888.600.8545
- Pro Dunk®
- Web: www.produnk.com
- 22047 Lutheran Church Rd.
- Tomball, TX 77377
- Support: www.produnk.com/support
Read this manual all the way through before starting assembly of your Backstop Net. Then read each step completely before beginning installation.
Bill Of Materials
- Ref./Qty./Description
- A 1 Net
- B 2 Female + Male Fiberglass Poles
- C 2 Male Fiberglass Poles
- D 1 Main Pole Mount Bracket
- E 2 10mm x 3cm Hex Bolts
- F 2 10mm Flat Washer
- G 2 10mm Lock Washer
- H 6 Metal Ground Stakes
Safety Instructions
IMPORTANT
It is the responsibility of purchaser to ensure that all assemblers and
players fully comply with the detailed instructions set forth in this product
as-sembly manual. Product assembly should be carried out exactly as instructed
and owner su-pervision of use and installation is required to pre-
- All tools used to assemble this product should be used in compliance with manu-facturer’s guidelines.
- Installation of this product will require heavy lifting and bending. Any person that is not capable of such activity should not participate in the installation of this product.
- If using a ladder during assemble, use ex-treme caution and refer to the warnings and cautions on the ladder.
- Due to the size and weight of this product, we recommend at least (2) capable adults are present.
- All parts and components necessary to complete proper installation are included within this product. Do not use parts not included with our system. Failure to follow this requirement could cause product mal-function and will void warranty of this prod-uct.
- Keep all organic materials away from parts and components to avoid damage.
- Check the Backstop Net System on a regular basis to ensure that there are no signs of de-terioration or corrosion, loose hardware, or damaged parts. If you see any signs of dam-age contact Pro Dunk® for replacement parts or assistance.
- For maintenance repairs please contact a pro-fessional. produnk.com/installers
- Failure to follow these safety instructions could result in product malfunction, seri-ous injury, or even death
Pro Dunk® retains the right to modify this document at any time without notice or obligation. Keep this installation manual as a refer-ence for your safety and the safety of those playing on the basketball system. Additional copies of these safety instruc-tions are available by calling customer service at 1-888.600.8545 or at www.produnk.com/support
Installation Overview
In order to have safe fun and a long use of your Backstop Net, please note and heed the following:
- Prior to Backstop Net assembly, check the work area for any haz-ards.
- Immediately unpack all components and cross check against bill of materials. Report any shortages to Pro Dunk® customer ser-vice at 1.888.600.8545.
- You must have a Pro Dunk® basketball system with the new 4 threaded mounting holes on the top of the main pole. You may have to remove 4 plugs to expose these threaded holes.
- For safety measures, have at least 2 capable persons to assist you in assembly of your Pro Dunk® Backstop Net.
- Parts can be ordered at www.produnk.com/parts
Required Tools
- (1) Crescent Wrenches
Assembly
Bracket Installation
Using the provided hardware attach the Pole Bracket to the back of your main
pole utilizing the top 2 holes in the back of your main pole. See below
showing how to mount depending on the model.
Pole Assembly
Take 1 pole with a female end and male end and 1 pole with just a male end and
connect these as shown below. Repeat this step for the second set of poles
.
Slide Poles Into Net Sleeves
Slide both set of poles through the top of net as shown below.
Attach Poles to Main Pole Mount Bracket
Screw each side of the net into the Main Pole Mount Bracket as shown below
.
Staking Net Into Ground
Using the provided Metal Ground Stakes secure the net to the ground.
Maintenance
Like any piece of hardware, proper maintenance is required. Several factors such as the environment, organic materials, herbicides, pesticides, excessive use or misuse can eventually cause the Backstop Net to require maintenance. Failure to do so could result in system failure, property damage, or even personal injury.
- All organic materials should be kept away from the Backstop Net System at all times.
Examples: grass clippings, moisture, garbage, dirt, etc.
Routine System Inspection
Before each use inspect the entire system for any signs of loose nuts and
bolts, any excessive wear and tear, any signs of rust or corrosion. If
replacement parts are needed you can contact Pro Dunk® directly or navigate to
www.produnk.com/parts to purchase parts for
your Backstop Net. Only parts pro-vided by Pro Dunk® should be used for
repair. Not doing so could cause the system to fail resulting in injury or
death and voids the limited warranty.
Warranty
Hoops Inc. Backstop Net Limited 90 Day Warranty
Hoops Backstop Net systems are warranted to the original purchaser to be free
from defects in material or workman-ship for 90 days of ownership by the
original retail purchaser. The word “defects” is defined as imperfections that
im-pair the use of the product.
Warranty Fulfillment
Merchandise must be shipped prepaid with a copy of proof of purchase to Hoops
Inc. for examination to see whether it needs to be repaired or replaced. Any
labor costs, travel expenses and any other changes involved in the removal,
installation or replacement of the defective/repaired parts from/to your Hoops
Backstop Net system will be your (the purchaser’s) responsibility. Shipping
charges for replaced or warranted merchandise being sent back to the customer
must be prepaid by the customer in advance. If not, the replacement shipment
will be sent out collect. Hoops Inc. re-serves the right to examine
photographs or physical evidence of merchandise claimed to be defective, and
to recover said merchandise, prior to authorization of warranty claims.
What is not covered by this warranty
This warranty does not cover defects or damage due to improper installation,
shipping, handling, alteration, accidents, vandalism, weather conditions
(rusting), exposure to corrosives, negligence, misuse (anything other than a
type of basketball activity or related contact with the unit), scratching,
scuffing or any event beyond the control of the Hoops Inc.. If unit is not
maintained as stated in the user manual the warranty will be void.
Liability
Hoops Inc. shall not be liable for indirect, special, or consequential damages
arising out of or in connection with the use or performance of the products or
other damages with respect to any economical loss, loss of property, loss of
enjoyment of use, costs of removal, installation or other consequential
damages for breach of any expressed or im-plied warranty on these products.
Guidelines
Keep your proof of purchase (original retail purchaser). Without it, we will
not be able to proceed with any warranty service.
-
Call
- 1-888-600-8545 / Warranty Dept.
-
Write
- Hoops Inc.
- Attn: Warranty Dept
- 22047 Lutheran Church Rd.
Tomball TX 77377
-
Email
For the most up to date warranty information please navigate to www.produnk.com.