tuya IPC201 Smart Indoor Camera User Manual
- June 1, 2024
- Tuya
Table of Contents
tuya IPC201 Smart Indoor Camera
Product Specifications:
- Resolution: 420x128MM
- Model: IPC201
- Includes: Indoor camera, Type-C USB cable, Double side sticker
- Micro SD Card Slot: Supports Class 4 or higher cards up to 128GB
Product Usage Instructions
Resetting the IP Camera:
- If the camera fails to connect, it needs to be reset.
- Locate the reset pin.
- Press the reset pin into the Reset hole on the top of the camera.
- Press and hold until the camera automatically moves and you hear the prompt sound.
Components of the Camera:
- 1. Indicator: Displays camera status
- 2. Camera Lens: Captures images and videos
- 3. Speaker: For audio playback
- 4. Micro SD Card Slot: Insert a Micro SD card for storage
- 5. Reset Button: Used for resetting the camera
- 6. Type-C USB: For connecting to power or other devices
- 7. Speaker: Another speaker for audio output
Frequently Asked Questions (FAQ)
Q: What type of Micro SD card is recommended for use with the camera?
A: A Class 4 or higher Micro SD memory card up to 128GB is required for
normal use.
What’s included
- Indoor camera
- Type-C USB cable
- Double side sticker
Parts of the Camera
- Indicator
- Camera lens
- Speaker
- Micro SD card slot
- Reset button
- Type-C USB
- Speaker
Initial Setup
Turning On the Camera
Connect the power supply with the IP camera and you will hear the sound ‘camera’ start.
If the camera is failed to connect, it needs to be reset.
To reset the IP camera, use the reset pin to press the “Reset” hole on the top
of the camera.
Press and hold until the camera automatically moving and hear the prompt
sound.
Installing the Memory Card
Class 4 or higher Micro SD memory card is required (up to 128GB) for normal use.
Class 4 or higher Micro SD memory card is required (up to 128GB) for normal use.
Preparations before use
Mobile device system requirements:
Android OS 4.4 or higher
iOS 9.0 or higher
Install the App
Use your mobile phone or tablet to search for “TuyaSmart” in Google Play (for
Android OS) or in the Apple app store(for iOS) to find the app,and install it
according the instructions.
Register an account
If this is the first time using the app, an account need to be registered as
below:
Connecting Your IP Camera with the App
Note: Your IPC Camera is supported only on a 2.4GHz Wi-Fi network. For setup, make sure your mobile device is connected to a 2.4GHz Wi-Fi network
-
After installing the app ‘Tuya Smart’, open the app and follow the prompts to setup the app.
Then tap ‘+’ or ‘Add Device’ from the home page.
Tap ‘Security & Sensor’, the choose ‘Smart Camera’.
-
Power the device on and hear the sound of ‘camera start’.
Make sure your smart device is connected to a 2.4G Wi-Fi network, then tap ‘Confirm’.
-
The app will guide you to scan mobile device with the camera.
When you tap ‘Continue’ the mobile phone displays a QR code.
Hold the camera 15 to 20 cm in front of the mobile device for the camera to scan the QR code.
-
In connecting, make sure your router, mobile and device are as close as possible.
Once the camera get the information from mobile device, the camera will have a sound ‘camera configured’ which means the camera is connected successfully.
Your camera’s Live Camera view with streaming video will be openned.
FAQ
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body:
Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>