Gorilla 1 x 120 Heavy Duty Extra Long Double Sided Mounting Tape Instructions
- June 16, 2024
- Gorilla
Table of Contents
Gorilla 1 x 120 Heavy Duty Extra Long Double Sided Mounting Tape
DIRECTIONS
- Apply tape to the back of the object vertically, allowing for an even distribution of weight. Avoid touching the surface of the tape.
- Cut tape and press to secure tape to object.
- Remove the clear liner and align the object to the desired placement.
- Press firmly for 60 seconds as Gorilla Mounting Tape conforms to the surface and creates a strong, permanent bond.
TIP: For easier liner removal – Pinch and stretch a corner of the adhesive until the liner lifts from the tape.First Aid and SDS information
TECHNICAL SPECS
- APPLICATION TEMPERATURE – above 50° F
- SERVICE TEMPERATURE – continuous- up to 194° F intermittent- up to 302° F
- OUTDOOR – Yes
- MOISTURE RESISTANT – Yes
- STORAGE TIPS – Store in a cool, dry location. 64° to 72° F, 30 to 70% RH.
FAQS
Is Gorilla Mounting Tape food safe?
Gorilla Mounting Tape is not recommended for direct or indirect food contact
and should not be considered food-safe.
What should I do if I think a human or animal has ingested Gorilla Mounting
Tape?
For medical emergencies, call
1-800-420-7186 anytime to reach a
member of our product safety team. Additional product safety and first aid
information can be found at: http://www.gorillatough.com/first-aid
How do I remove the Gorilla Mounting Tape from my surface?
Gorilla Mounting Tape is a permanent tape and may cause surface damage. If
tape must be removed, the mounted object must be removed first. This may best
be achieved by prying from one corner. Next, mounting tape can be removed by
slowly stretching the tape parallel to the surface.
Will Gorilla Mounting Tape work on plastic/vinyl/rubber?
Gorilla Mounting Tape works well on many plastics, however, it does not work
on certain low surface energy
plastics, such as polyethylene (PE) and polypropylene (PP), or certain types
of rubber with high oil or plasticizer
content.
How do I remove the liner on the Gorilla Mounting Tape?
Liner should be removed once tape is applied to object. Lift the liner from
the corner by using your fingernail, edge of the product blister card, or a
blade. Liner may also be removed by pinching and stretching the corner of the
Mounting Tape at a 40-degree angle to the surface, until the liner lifts.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>