Audio Technology Of New York UO-BTSP-DSBL Disco Ball Speaker User Manual

Audio Technology Of New York UO-BTSP-DSBL Disco Ball Speaker

Overview

1. Press the power switch down to turn the speaker on. The light will pulse to the rhythm of the music and the mirror ball will rotate.
2. Press the power switch up to turn the speaker on. The light will stay on as normal and the mirror ball will rotate.
3. To turn off the light and speaker, flip the power switch to the middle (off) setting.

SPECIFICATIONS

• Product Size: 15 x 15 x 25.4cm
• Product Weight: 640g
• Loudspeaker: 45mm
• Rated Power: 3W
• Interface: DC 5.5

Bluetooth® Specifications:

• Operation Frequency: 2.400GHz – 2.480GHz
• Power Output (Peak) Class 2/4 dbm
• Receiving Sensitivity: -88db, @0.1% BER
• Operating Range: Up to 10m

Battery Specifications:

• Capacity: 1200mA, 3.7V, Li-ion Battery
• Music Playback name: 3 – 4 hours at 70% volume
• Charging Standard: DC 5V, B00mA
• Charging Time: 2 – 3 hours

Accessories:

• USB Cable: 1 pc
• User Guide: 1 pc
• Speaker: 1 pc

OPERATION

1. Power switch: Switches the unit On/Off
2. DC 2.5: Charging port
3. LED indicator: Built-in battery indicator
   • The red light on: in charging mode
   • Red light off fully charged
   • Blue light flashing quickly: in Bluetaath® pairing mode
   • Blue light flashing slowly: Bluetooth® pairing successfully

USAGE

• Switch on the speaker
• Activate the connecting devices’ Bluetooth®
• Turn speaker to pairing mode (blue light flashing quickly)
• Search “BT Speaker” and pair
• Connect and play

NOTES

1. Bluetooth® transmits bi-directionally, the transmitting distance is highly related to the audio player. Compatible Bluetooth®devices are recommended.
2. Some players will not automatically switch during the play function, in this case, a “pop” noise may be heard between songs.
3. When Bluetooth® transmitting devices cannot be connected, please delete the last Bluetooth® receiving device’s names on the list. Re-activate the speaker, then try re-searching and re-paring.
4. Audio quality can be affected when the Bluetooth® transmitting devices have a poor signal or low battery capacity.

FCC STATEMENT

FCC Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation, If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radiofTV technician for help.

RF Exposure Compliance
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>