Decaura 50925CH Kitchen Mixer Installation Guide
- June 12, 2024
- Decaura
Table of Contents
Installation Manual
Kitchen
Mixer
For Model Code: 50925CH, 50925BK, 509255G
50925CH Kitchen Mixer
Please check over carefully the surface and accessories to avoid any damage
and missing part.
| No. | Description | Quantity |
|---|---|---|
| I | Mixer Tap Body | x 1 |
| 2 | Screw Tube | x 1 |
| 3 | Rubber Washer | x 1 |
| 4 | Stainless Steel Gasket | x 1 |
| 5 | Fixting Nut | x 1 |
| 6 | Inlet Hose | x 2 |
Instructions
- Working pressure: 0.05-1 Mpa, Working temperature: 0-55°C.
- Products are manufactured as per standard AS/NZS 3718:2005. as per Australian standard, and with WaterMark & WELS certificate as shown in the packing.
- All surfaces should be cleaned with water or mild liquid degergent. Do not use cream cleaner or citrus based or chemical cleaning products.
Warranty Terms
All products are guaranteed as below:
- 5 years guarantee against main body finishing and Cartridge.
- 2 years guarantee on washers and O-rings.
Installation Steps
Step 1
Unscrew the fixing nut, stainless steel gasket and rubber washer from kitchen
mixer.
Take off the rubber washer, stainless steel gasket and fixing nut from the
screw tube, then screw the tube to kitchen mixer tap base.
Step 2
Connect the inlet hoses to the cooper pipes and rotate them tighten.
Then slide the single hole faucet through the mounting hole.
Step 3
Place the rubber washer and stainless steel gasket to the screw tube and
tighten the fixing nut securely as shown.
Remember to use drivers crew to tighten the screw which in the nuts both
side.
Step 4
Connect and tighten the Hot and Cold supply hose to the valve and check any
leak age before use.
Notice: It is important to flush out the water supply pipes before
connect the hose to angle valve. This procedure will prevent foreign objects
entering the cartridge.