SUPERSONIC SC-6025QI Dual Alarm Clock with 2-in-1 Wireless Charging User Manual
- June 12, 2024
- Supersonic
Table of Contents
SUPERSONIC SC-6025QI Dual Alarm Clock with 2-in-1 Wireless Charging User
Manual
Product overview
Product Connection
- 1.Plug the USB-A end of cable into the power adapter (QC3.0 or PD) while plug Type-C end into the product
- The product will be ready and stand by ater all indicators are on.
Light Modes:
- Power Connected – Blue Blinks 2x
- Standby-Light Off Charging-Blue Light On
- Charged-Light Off F
- Foreign body detected/metal (cannot charge)
- Blue Light Flash
Setting the Time :
- Short press the “M” once to enter the time setting HOUR, the Hour starts to flash, short press +/- adjust the Hour value once, or long press *+/~” to continuously adjust the Hour value.
- Short press the “M once to enter the time setting MINUTE, the Minute starts to flosh, short press +/~” adjust the Minute value once, or long press +/~” to continuously adjust the Minute value.
- Short press the *M” once to finish the Time setting,
Setting the Alarm:
- Long press the + to turn on or off the Alarm 1; Long press the ” totur on or off the Alarm 2. When the alarm s turned on, the corresponding alarm indicator will light up.
- Long press the “M” once to set the Hour of Alarm |, the Hour starts to flash, press “+/~* adjust the Hour value,
- 5hort press the “M” once to set the MINUTE of Alarm |, the Minute starts to flash, press +/- adjust the Minute value.
- Short press the “M” once to set the Hour of Alarm 2, the Hour starts to flash, press “+/~* adjust the Hour value,
- Short press the “M” once to set the MINUTE of Alarm 2, the Minute starts to flash, press “+/-” adjust the Minute value,
- 5hort press the “M” once to finish the Alarm setting.
Turn off Alarm or Snooze
- The alarm sound is a buzzer. After the alarm fings, if nothing is done, it will automatically turn off after 3 minutes of ringing.
- After the alarm rings, short press “M” – day’s alarm of Alarm I; short press “M ~ to stop the “”” to stop the day’s alarm of Alarm 2. Long press + to tum off the Alarm ; Long press -* to turn off the Alarm 2.
- Or after the alarm rings, press *Snooze” button or dab the product enter to snooze state. The alarm indicator flashes during the snooze. § mins per interval, no limited of snooze times.
Setting the Display brightness
The display has 4 levels brightness adjusted by manually. Short press “+/-” to
adjust the brightness, each press goes to the next setting: Max, Medium,
Minimurn, Off. By default, the display in Max brightness.
Setting the Calendar
- Long press the Snooze once to enter the calendar Setting YEAR, the Year starts to flash, press +/~ adjust the Year value.
- 5hort press the “Snooze” once to enter the calendar setting MONTH, the Month starts to flash, press +/~ adjust the Month value.
- 5hort press the Snooze” once to enter the calendar setting DAY, the Day starts to flash, press +/-” adjust the Day value. The week will adjust automatically according to the DAY.
- 1nthe standby mode, short press the “Snooze” to check the Calendar. It will automatically exit after 5 seconds.
Setting the Temperature
- Factory set to Fahrenheit
- Double press the *Snooze” to change the temperature from Fahrenheit to Celsius or from Celsius to Fahrenheit
Power Saving Function
- The built-in button battery is a time memory function.
- Unplug the external power supply, all functions are invalid, and the functions return to normal when the power is turned on.
Wireless chary 9
- Please confirm that your mobile phone is compatible. with the wireless charging,
- If the mobile phone has @ metal case, please remove it before put the wireless charger on it
- Place a mobile phone compatible with a wireless charger directly on the charging area; try to place it in the center position to get the most efficient charging speed.
NOTICE
-
Attention: In order to function alarm, wireless charging and USB output work at same time, power shall be connected by a QC2.0 o QC3.0 power adapters. It connected by a 524 adapter, only wireless charging and alarm can work.
-
D0 not squeeze or collide.
-
Do not disassemble or put into the fire, watter, to avoid short-circuit leakage.
-
D0 not use wireless chargers in severe high temperature, humidity or corrosive environments to avoid leakage of damaged circuts
-
Do not place too close to magnetic cards (1D cards, bank cards, ete.) with magnetic strips or chips to avoid magnetic card failure.
-
Keep more than 20cm between the implanted medical device (pacemaker, implantable cochlea, etc.) and the. wireless charger to avoid potential disruption to medical devices.
-
Keep children from the product in case they play the wireless charger as a toy to avoid accidents.
-
from water and other liquids.
-
7To clean the charger, make sure the power supply is disconnected
-
Usage temperature: 0-45
-
Usage humidity: 20-85% (40 )
Warning: This product contains button batteries, which can cause serious or fatal injury within 2 hours if swallowed. Batteries must be kept away from children. f you think the battery may have been swallowed or placed anywhere in your body. seck immediate medical attention.- Pictures in this manual are all lustration. Final product is subject to fact.
- Inside package: alarm charger, charging cable(IM 5V 2A USB-A to Type-C), User Manual.
- Power adapter is not included. Please purchase or use phone original adapter, QC2.0 or 3.0 power adapter.
Product Specification
Input: 5V/3A 9V/3A 12V/2A
Wireless Output: 15W (MAX)
USB-A output: 5V/1A(Max)
Charging efficiency: 73%
Charging distance : 8
mm Frequency : 110-205
KHz Size : 14112570mm
Applicable Devices
Products qualified with Qi standard.
WARRANTY
Supersonic inc. (‘supersonic?) warrants this product to the original purchaser
ONLY, o be free from defects in materials ‘and workmanship under normal use,
for ninety (30) DAYS from the date of original purchase. Proof of purchase
(receipt) required. please visit
https://www.supersonicine.com/pages/warranty for additional information.
