Panasonic FP7 Series TCP Programmable Controllers User Manual
- June 12, 2024
- Panasonic
Table of Contents
Panasonic FP7 Series TCP Programmable Controllers
Product Information
- Product Name: PLC1.ir
- Product Version: PLC1.Vir1.00
- Release Date: January 12, 2016
Product Usage Instructions
To use the PLC1.ir product, please follow these steps:
- Make sure the HMI (Human Machine Interface) is set to factory settings.
- Connect the PLC1.ir controller to the PLC address: P1L9C21..i1r 68.0P.L1C1.ir.
- Connect the jumper cable or network cable without jumper (Auto-detected by HMI).
- Ensure the connection between the PLC1.ir controller and HMI is established.
- Check the status of the connection by referring to the PLC1.ir CPoLnCt1r.oirl ArePaL/C1S.tiratus PALrCe1a.:irDT0/PDLCT11.0ir.
- For specific configuration settings and functions, please refer to the PLC1.ir SPerLiCe1s.irHMI CPoLCn1n.eirctionPLMCa1n.irual.
- To read and write data from/to the PLC, use the PLC Read/Write Address defined in the product manual.
- For input and output operations, refer to the ExExttPeeLrrCnn1aa.llirOInuptupPtuLRtCeR1l.aeirylay section.
- For data registers and their lengths, consult the PLC1.ir DaPtaLCR1e.gir isterPLC1.ir and PLDCT1.nir sections.
- For specific data types and their representations, refer to the SpePcLiCa1l .Dir ata RPeLCgi1s.itrer PLSCD1.nir section.
Panasonic FP7 Series TCP
- HMI Factory Setting:
- Controller IP Address: 192.168.0.1
- Controller C O M Port: 9094
- Controller Station Number: 238
- Control Area / Status Area: DT0/DT10
Connection
Standard Jumper Cable / Network Cable without jumper (Auto-detected by HMI)
Definition of PLC Read/Write Address
Registers
| Type | Format | Read/Write Range | Data Length | Note |
|---|
Word No. (n)
Internal Relay| WR n| WR 0 – WR 2047,| Word|
Link Relay| WL n| WL 0 – WL 1023| Word|
External Input Relay| WX n| WX 0 – WX 511| Word|
External Output Relay| WY n| WY 0 – WY 511| Word|
Data Register| DT n| DT 0 – DT 999423| Word|
Special Data Register| SD n| SD 0 – SD 39| Word|
SD 50 – SD 85| Word|
SD 100 – SD 115| Word|
SD 120 – SD 125| Word|
Link Data Register| LD n| LD 0 – LD 16383| Word|
Timer Setting Value| TS n| TS 0 – TS 4095| Double Word|
Timer Elapsed Value| TE n| TE 0 – TE 4095| Double Word|
Counter Setting Value| CS n| CS 0 – CS 4095| Double Word|
Counter Elapsed Value| CE n| CE 0 – CE 4095| Double Word|
Contacts
| Type | Format | Read/Write Range | Note |
|---|
Slot No. (s) Word No. (n) Bit No. (b)
Internal Relay| R nb| R 00 – R 2047F|
Special Internal Relay| SR nb| SR 00 – SR 3F|
SR 100 – SR 259|
SR 1000 – SR 1499|
Link Relay| L nb| Ln 00 – Ln 1023F|
External Input Relay| X nb| Xn 00 – Xn 511F|
External Output Relay| Y nb| Yn 00 – Yn 511F|
Direct Input| IN s.nb| IN 1.00 – IN 64.62F|
Direct Output| OT s.nb| OT 1.00 – OT 64.62F|
Pulse Relay| P nb| P 00 – P 255F|
Error Notification Relay| E b| E 0 – E 4095|
Timer Flag Contact| T b| T 0 – T 3071|
Counter Flag Contact| C b| C 0 – C 3071|
NOTE
- PLC default setting is 238. It supports the external device connections of all station number. To change the setting, PLC supports station number range from 0 to 99. For more detail on PLC station number, please refer to PLC user manual.
V1.00 Revision January, 2016
Documents / Resources
|
Panasonic FP7 Series TCP Programmable
Controllers
[pdf] User Manual
FP7 Series TCP Programmable Controllers, FP7 Series, TCP Programmable
Controllers, Programmable Controllers, Controllers
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>