tp-link Tapo C420 Smart Wire-Free Security Camera User Guide

tp-link Tapo C420 Smart Wire-Free Security Camera

Mount the Camera After Setup

Images may differ from the actual products.

Note: Images may differ from the actual products.

Charge the Battery

Method 1: Battery Itself

Fully charged: Steady green

Method 2: Battery Inside Camera

Set Up

1. A Tapo Hub is required. Make sure your Tapo Hub is successfully added via the Tapo app.
   | |
   ---|---|---
   
2. Follow app instructions to complete setup.

Safety Information

• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
• Do not use damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended.
• Do not use the device where wireless devices are not allowed.
• Keep the device away from fire or hot environments. DO NOT immerse in water or any other liquid.
• Adapter shall be easily accessible.

CAUTION!
Risk of fire or explosion if the battery is replaced by an incorrect type.

CAUTION!
Avoid replacement of a battery with an incorrect type that can defeat a safeguard. Avoid disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion. Do not leave a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; Do not leave a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Declaration of Restricted Substance Content Labeling

diphenyl ethers (PBDE)
PCB| 0| 0| 0| 0| 0| 0
shell| 0| 0| 0| 0| 0| 0
Power Supplier| —| 0| 0| 0| 0| 0
Others and accessories| —| 0| 0| 0| 0| 0
Note 1：“Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the
Note 2：“ ○ ” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence
Note 3：The “−” indicates that the restricted substance corresponds to the exemption.

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU Declaration of Conformity may be found at https://www.tapo.com/support/ce/.
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017.
The original UK Declaration of Conformity may be found at https://www.tapo.com/support/ukca/.

For TP-Link Branded Products Only. For more information about warranty, please visit https://www.tapo.com/support
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE (OR BY COUNTRY OR PROVINCE).
TO THE EXTENT ALLOWED BY LOCAL LAW, THIS WARRANTY AND THE REMEDIES SET FORTH ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS.
TP-Link warrants the TP-Link branded hardware product contained in the original packaging against defects in materials and workmanship when used normally in according with TP-Link’ s guidelines for some period which depends on the local service from the date of original retail purchase by the end-user purchaser.

Setup Video
Scan QR code or visit
https://www.tp-link.com/support/setup-video/#cloud-cameras

Visit www.tapo.com/support
for technical support, user guides, and more information

References

• Anatel — Agência Nacional de Telecomunicações
• Support | Tapo
• Regulatory Compliance | Tapo
• UKCA | Tapo
• | TP-Link Australia

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>