OSASHI YSY-808 Electric Food Chopper User Manual

August 11, 2024
OSASHI

OSASHI YSY-808 Electric Food Chopper

Product Information

Specifications:

  • Main Engine
  • Feed Inlet (Keep your fingers out)
  • Power Button
  • Type-C Charging Port
  • USB Type-C interface Charging Cable
  • Slicing Cutter
  • Transparent Cone
  • Pressing Bar
  • Knife Post
  • Cup
  • Spoon
  • Clean Brush

Product Usage Instructions

  1. Initial Setup:
    For the first use, please fully charge the host using a USB Type-C cable and a power adapter that selects 5V/1A or other USB interface devices. The blue indicator light will be on when fully charged.

  2. Food Processing :

  3. Press the cutter head against the cup body.

  4. Put the food into the cup and cover the main engine.

  5. Add ingredients through the feeding port while crushing.

  6. Lightly press the main unit to jog the switch.

  7. Troubleshooting:
    If the blade gets stuck due to excess food, remove some food properly. Avoid using the product for more than 30s in a single use.

  8. Cleaning and Maintenance:
    After each use, clean the blade, transparent cup, cone, pressing rod, and main unit immediately. Do not soak the main unit in water. Use a soft damp cloth or rinse under a faucet for cleaning.

FAQs

  1. Why is my device not starting after installation?
    Possible causes include low battery or a loose charging cable. Try charging the main engine or reinserting the charging cable securely.

  2. What should I do if there is a pungent smell when using the product?
    A slight odor is normal during initial use. If it persists, contact the designated repair service for assistance.

ROTOCHOP – USER MANUAL

PRODUCT PARAMETERS

  • Product name: ROTOCHOP
  • Model: YSY-808
  • Unloaded speed: 1200rpm
  • Rated speed: about 1000rpm
  • No-load current :2.8A
  • Rated current:12A
  • Rated voltage: 3.7V
  • Temperature range: -10° C40° C
  • Battery capacity: 800mAh
  • Single working time: 430S ‘
  • Charging voltage: 5V
  • Charging current: 1A

PRODUCT PARTS

  1. Main Engine
  2. Feed Inlet (Keep your fingers out)
  3. Power Button
  4. Type-C Charging Port
  5. USB Type-C interface Charging Cable
  6. Slicing Cutter
  7. Transparent Cone
  8. Pressing Bar
  9. Knife Post
  10. Cup
  11. Spoon
  12. Clean Brush

INSTRUCTIONS

  1. For the first use, please fully charge the host. And then, the blue indicator light will be on. The product is equipped with a USB Type-C, and the power adapter selects 5V/1A or other USB interface devices.
  2. irst press the cutter head against the cup body, then put the food into the cup, and cover the main engine; the feeding port can add ingredients while crushing.
  3. After the food is loaded into the transparent cup, it all the main units along the slot of the cup. Then lightly press the main unit the blue indicator light will be on when the main unit is lightly pressed)  to jog the switch.
  4.  When there is too much food, it may cause the blade to get stuck and not turn, please take out some food properly.
  5. After starting, the single use time is less than 30s. If you feel that the food is not delicate enough, continue to touch the switch
  6. Indicator light prompt:
    •  Charging – Red light on
    • Fully charged – Blue light on
    • Using – Blue light on

HOW TO USE – Diagram 1

  1. Turn the cutting blade face up.

  2. Press the cutter head against the cup body.

  3. Press the transparent cone until it is clamped.

  4. Put the ingredients into the feeding port and press the switch to use.

  5. Put the ingredients into the cooking cup.

  6. Feed ingredients directly into the feeding port.

  7. With the UP cutter head facing up, complete the installation.

  8.  Cover the pressing bar to prevent the ingredients from splashing, press the switch lightly.

  9.  Turn the brush face down, which can be used for cleaning.

  10. Put in the cleaning brush and press the power switch to use.

FAIL ANALYSIS

Fault phenomenon Indicator light Cause Analysis Troubleshooting
After installing the main engine. press and hold the switch to not start Off/
Red light fleshing Low battery Charge the main engine
Main engine charging Light off Check if the charging cable is loose unplug

it and reinsert it into the charging port
There is a pungent smell when using| /| it is normal when a the motor is used for the first time| If the pungent odor still occurs after repeated use. please contact the designated repair service
---|---|---|---

CLEANING AND MAINTENANCE

  1. After using the product, please clean the blade, transparent cup, transparent cone, pressing rod, and lower cover of the main unit immediately.
  2. When cleaning the main unit of the product, you can directly rinse it under the faucet for a short time, or wipe it with a soft damp cloth, remember not to soak it in water
  3. If the ingredients such as carrots are dyed, it can be cleaned with a cloth dipped in detergent. The biological pigment does not affect the use and health.
  4. The blade is very sharp and should not be touched by hand, to avoid injury, the water should be very clear when cleaning so that you can see the blade during the cleaning process
  5.  Do not use abrasive or corrosive cleaning agents when cleaning
  6. It is strictly forbidden to sterilize all parts of this product at high temperature
  7. After cleaning the product, please dry or dry in air all parts of the product before reassembling. Store the product, if the product will not be used for a long time, please charge and maintain the product once within three months.

SAFETY INSTRUCTION

  1. In order to avoid injury caused by misuse, please read the instruction carefully before using this product. and use this product in strict accordance with the purpose stated in the instructio.
  2. This product is an electric hand-held cooking hammer. please charge this product before using it for the first time.
  3. Before adding food, make sure the blades are in place and running smoothly.
  4. Do not scratch the machine with sharp things.
  5. It is strictly forbidden to use the food processor under load.
  6. Do not place the food processor in a microwave oven for heating or freeze it in the refrigerator to avoid rupture of the food processor. It is recommended to use water temperature below 60′ for sterilization and cleaning.
  7. This product cannot be used to process hard foods, such as: coffee beans, soybeans, gelatin, rice, rock sugar, ice cubes, fatty meat or meat with belt bones or fascia or frozen food similar ingredients.
  8. When working, it is strictly forbidden to touch the detachable parts such as blades to avoid injury or damage to the product.
  9. The continuous working time of this product should not exceed 30s. After 30s of continuous work, it can be used after a 2-minute rest. The 30s interval of 2 minutes is a cycle. After 3 cycles of continuous work, the product must be cooled for 30 minutes, to ensure product life.
  10. The blade is very sharp, please do not touch the blade directly with your hands, hold the blade holder on the blade when removing or installing.
  11. Do not use steel wool, abrasive cleaners, or corrosive liquids (such as gasoline or acetone) to clean the product.
  12. When cleaning, please use a sponge and detergent: do not put any part of this product into the dishwasher for cleaning.
  13. This product should be stored out of the reach of children, and should not be used or played by persons (including children) who are not physically able, sensory or mentally handicapped, or lack relevant experience and knowledge.
  14. Due to the different firmness, freshness and fiber distribution of vegetables and fruits, the thickness of the shreds and the thickness of the slices will vary slightly.
  15. This product is suitable for cutting fruits and vegetables, please do not exceed the scope.
  16. This product is for personal or household use only and is not for commercial use.
  17. Note: Be careful of blade injury when removing the blade, emptying the cup and cleaning.
  18. Before disposing of the appliance, the battery must be removed.
  19. When removing the battery, the appliance must be powered off, and the battery should be disposed of safely.

The steps to remove the battery are as follows

  1. Remove the plastic cover from the handle
  2. Cut off the power supply of the positive and negative colors of the battery respectively, and wrap the power cords of the positive and negative electrodes of the battery with electrical tape
  3. Batteries should be disposed of safely, and batteries should be put into designated recycling locations or handed over to the environmental recycling department for disposal.

INSTRUCTIONS FOR RECYCLING AND DISPOSAL:

  • This label means that the product cannot be disposed of as other household waste throughout the EU. To prevent potential damage to the environment or human health from uncontrolled waste disposal. Recycle responsibly to promote the sustainable use of material resources. If you want to return a used device, use the drop-off and collection system, or contact the retailer from whom you bought the product. The retailer can accept the product for environmentally safe recycling.
  • A declaration by the manufacturer that the product complies with the requirements of the applicable EU Directives.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals