ROTWILD R.X275 ULTRA 2023 e-Mountain Bike User Guide
- June 9, 2024
- ROTWILD
Table of Contents
ROTWILD R.X275 ULTRA 2023 e-Mountain Bike
Product Information
The R.X275 is an electric bike manufactured by ROTWILD. It comes with
different riding profiles – Eco, Medium, and High – that can be switched
through by pressing the display button. The bike can be charged by connecting
the delivered charging lead with the charging plug on the down tube when the
system is running on low battery. The display shows the battery level,
remaining range, current driver power and motor power, current speed, and
cadence. The bike can be connected to the TQ e-bike app for additional
features, and it can also be paired with a Bluetooth or ANT+ capable bike
computer.
Product Usage
Before using the R.X275, it is recommended to read the user manual in addition to the quick start guide. To power on the bike, push the display button. To shut down the system, hold down the display button for longer than three seconds. To charge the bike, connect the delivered charging lead with the charging plug on the down tube when the system is running on low battery. To switch through the riding profiles, press the display button. Eco is suitable for flat to hilly routes and switches off smoothly at 20km/h. Medium is suitable for hilly to mountainous routes on loose surfaces, and High will help climb long and steep distances. The display shows important information such as battery level, remaining range, current driver power and motor power, current speed, and cadence. To switch through different displays in the lower display field, double-click on the display button. The R.X275 can be connected to the TQ e-bike app by turning on the bike and tapping the Connect button on the app’s home screen. Enter the numbers shown on the display into your smartphone and confirm the connection. The Motor Tuning setting allows you to completely adapt the motor to your needs in every riding profile. The bike can also be paired with a Bluetooth or ANT+ capable bike computer by selecting at least one sensor on your bike computer.
Register your new ROTWILD Bike at:
www.rotwild.com/service/produktregistrierung.
Quick start Guide R.X275
NOTE
The Quick start Guide does not replace the user manual. You should always
read it in addition to this Quick start Guide. You can power on your R.X275 by
pushing the display button. If you hold it down for longer than three seconds,
you shut down the system. When your system is running on low battery, you can
charge your ROTWILD Bike by connecting the delivered charging lead with the
charging plug on the down tube.
You can use your ROTWILD bike with different riding profiles. You switch through the riding profiles with a short press on the display button.
- You will tackle flat to hilly routes with Eco. The system switches off smoothly at 20km/h.
- Medium is suitable for mastering hilly to mountainous routes on loose surfaces.
- High will help you climb long and steep distances.
Boost Button
The display gives you the following information:
- The horizontal bars indicate the state of charge status of your battery. One bar corresponds to 10% state of charge.
- You can read the charge status of your optional range extender from the dots. One dot corresponds to 20% state of charge of the range extender.
- In the lower display field you can display different views by double-clicking on the display button.
Display
With a double-click on the display button you switch through the displays
in the lower display field.
- BATT Battery level
- KM Remaining range
- W Current driver power and motor power
- KMH Current speed
- RPM Cadence
You can connect your ROTWILD Bike to the TQ e-bike app. Turn on your bike and
tap the “Connect” button on the app’s home screen. Enter the numbers, shown on
the display into your smartphone and confirm the connection. With the Motor
Tuning setting, you can completely adapt the motor to your needs in every
riding profile. You can also pair your ROTWILD bike with a Bluetooth or ANT+
capable bike computer. Select at least one sensor on your bike computer and
your
R.X275 is successfully connected.
Register your new ROTWILD Bike at:
www.rotwild.com/service/produktregistrierung
WWW.ROTWILD.COM
ADP Engineering GmbH · Am Batho 5 · 64807 Dasburg · Germany