HORIZON 3626809 Upright Fitness Bike Owner’s Manual

: June 15, 2024
: Horizon

Table of Contents

3626809 Upright Fitness Bike
ASSEMBLY
PREASSEMBLY
EXERCISE BIKE OPERATION
CONSOLE OPERATION
DISPLAY WINDOW
GETTING STARTED
PROGRAM INFORMATION
Read User Manual Online (PDF format)
Download This Manual (PDF format)

UPRIGHT BIKE
3626809 Upright Fitness Bike
Owner’s Manual

3626809 Upright Fitness Bike

OWNER’S MANUAL

Read the EXERCISE BIKE GUIDE before using this OWNER’S MANUAL.

ASSEMBLY

WARNING
There are several areas during the assembly process that special attention must be paid. It is very important to follow the assembly instructions correctly and to make sure all parts are firmly tightened. If the assembly instructions are not followed correctly, the exercise bike could have frame parts that are not tightened and will seem loose and may cause irritating noises. To prevent damage to the exercise bike, the assembly instructions must be reviewed and corrective actions should be taken.
Before proceeding, find your exercise bike’s serial number located on the front stabilizer tube and enter it in the space provided below. Also locate the model name which is next to the serial number.

SERIAL NUMBER LOCATION

ENTER YOUR SERIAL NUMBER AND MODEL NAME IN THE BOXES BELOW:
SERIAL NUMBER:

| | | |
---|---|---|---|---

MODEL NAME:

| | |
---|---|---|---

» Refer to the SERIAL NUMBER and MODEL NAME when calling for service. HORIZON
3626809 Upright Fitness Bike - feager

TOOLS INCLUDED:

5mm L Wrench
6 mm L Wrench
13/15 mm Flat Wrench
Screwdriver

PARTS INCLUDED:

1 Main Frame
1 Front Stabilizer Tube
1 Rear Stabilizer Tube
1 Console
1 Console Mast
1 Console Mast Grommet
1 Handlebar
1 Left & Right & Front Handlebar Covers
1 Seat
1 Seat Post
2 Pedals with Straps
1 T Knob
1 Reading Rack
1 Water Bottle Holder
1 Power Cord
1 Hardware Kit

PREASSEMBLY

UNPACKING
Unpack the product where you will be using it. Place the exercise bike carton on a level flat surface. It is recommended that you place a protective covering on your floor. Never open box when it is on its side.

WARNING

It is recommended that two people work together for ease and efficiency while assembling an exercise bike.
During each assembly step, ensure that ALL nuts and bolts are in place and partially threaded. It is recommended you complete the full assembly of your unit before completely tightening any ONE bolt.
Several parts have been pre-lubricated to aid in assembly and usage. Please do not wipe this off. If you have difficulty, a light application of lithium exercise bike grease is recommended.

NEED HELP?
If you have questions or if there are any missing parts, please refer to safety sticker on product to contact Customer Tech Support.

ASSEMBLY STEP 1

HARDWARE FOR STEP 1

PART| TYPE| DESCRIPTION| QTY
A| BOLT| M8| 4
B| SPRING WASHER| Ø8.0| 4
C| FLAT WASHER| Ø8.0| 4

A OpenHARDWARE.
B Attach theFRONT STABILIZER TUBE (1)toMAIN FRAME (2)using 2BOLTS (A)& 4WASHERS (B&C).
C Attach theREAR STABILIZER TUBE (3)toMAIN FRAME (2)using 2BOLTS (A)& 4WASHERS (B&C).

ASSEMBLYSTEP 2

HARDWARE FOR STEP 2

PART| TYPE| DESCRIPTION| QTY
A| BOLT| M8| 2
B| SPRING WASHER| Ø8.0| 4
C| FLAT WASHER| Ø8.0| 2
D| ARC WASHER| Ø8.0| 2
E| BOLT| M8| 2

A SlideCONSOLE MAST GROMMET (5)from bottom up theCONSOLE MAST (4).
B AttachLEAD WIREto bottom end ofCONSOLE CABLE. PullLEAD WIREthroughCONSOLE MAST (4). After pulling the lead wire through the mast, the top of theCONSOLE CABLEshould be located at the top of the mast.
C SlideCONSOLE MAST (4)intoMAIN FRAME (2)using 2BOLTS (A), 4WASHERS (B&D)from side and 2 BOLTS (E), 4WASHERS (B&C), from front side.
D SlideCONSOLE MAST GROMMET (5)down over MAIN FRAME (2).

ASSEMBLYSTEP 3

A SlideO-RING (21)down to position(22)to secure CONSOLE MAST GROMMET (5).
B AttachLEAD WIREand feed theHANDLBAR WIRES (6)through the hole in theCONSOLE MAST (4)and out the top of theCONSOLE MAST (4).
C Attach theHANDLEBAR (7)toCONSOLE MAST (4) using 1T KNOB (F).

ASSEMBLYSTEP 4

HARDWARE FOR STEP 4

A Attach theCONSOLE (8)to theREADING RACK (9) using 3SCREW (G).
B Connect theCONSOLE CABLES (10)and HANDLEBAR WIRES (6). Carefully tuck the CONSOLE CABLES (10)andHANDLEBAR WIRES (6)into theCONSOLE MAST (4).
C Attach theCONSOLE (8)to theCONSOLE MAST (4) using 4SCREW (H).

ASSEMBLYSTEP 5

HARDWARE FOR STEP 5

A Attach theWATTER BOTTLE HOLDER (11) to theCONSOLE MAST (4)using 2SCREWS (I).
B Attach theLEFT HANDLEBAR COVER (12) to theHANDLEBAR (7)using 2SCREWS (J).
C Snap in theRIGHT HANDLEBAR COVER (13) to theHANDLEBAR (7), attach the bottom first and then press the top to secure.
D Snap in theFRONT HANDLEBAR COVER (14) to theHANDLEBAR (7)using same method.

ASSEMBLYSTEP 6

A Pull theSEAT HEIGHT ADJUSTMENT KNOB (15)outward while sliding theSEAT POST (16) intoMAIN FRAME (2). Press(17-1)down to insert thePLASTIC BUSHING (17).
B AttachSEAT (18)toSEAT POST (16)using 3 PRE-INSTALLED BOLTS.
C Attach theRIGHT PEDAL (19R)to theRIGHT CRANK ARM (20R), tightening itCLOCKWISE using the flat wrench.
D Attach theLEFT PEDAL (19L)to theLEFT CRANK ARM (20L), tightening itCOUNTER- CLOCKWISE using the flat wrench.

ASSEMBLYSTEP 7

ASSEMBLY COMPLETE!
Max. User Weight: 130 kg / 286 lbs.
Overall Dimensions: 107 x 53 x 144 cm / 42″ x 21″ x 57″

EXERCISE BIKE OPERATION

This section explains how to use your exercise bike’s console and programming.
For the BASIC OPERATION please see the EXERCISE BIKE GUIDE.

CONSOLE OPERATION

Note: There is a thin protective sheet of clear plastic on the overlay of the console that should be removed before use.
A) LCD DISPLAY WINDOW:time, RPM, distance, calories, heart rate, speed, resistance level.
B) QUICK KEYS:used to reach desired resistance quickly.
C) RETURN:return to the last step.
D) ENTER:used to confirm selection.
E) START / PAUSE HOLD TO RESET :used to start workout, pause workout, and restart after pause.
F) KEYS:used to adjust resistance level and to cycle through selections during program set up.
G) BLUETOOTH HEART RATE OR TABLET:bluetooth default to connect to tablet, press and hold 5 sec to connect to the Bluetooth heart rate strap. When paired with the chest strap the console will not pair with a tablet; to enable tablet communication press and hold the Bluetooth button for 5 seconds or reset power. The led will be lit when the console is paired with BT device.
*If using a 3rd party App, please turn on your device’s Bluetooth (BT) and follow the App pairing instructions. Ensure the console is not connected to any other BT devices by checking that the BT symbol is not lit on the console.
H) TABLET/READING RACK:holds reading material.
I) ENERGY SAVER MODE:indicates if the machine is in energy saver mode.

DISPLAY WINDOW

TIME:Shown as minutes : seconds. View the time remaining or the time elapsed in your workout.
DISTANCE:Indicates distance traveled during your workout.
CALORIES:Total calories burned or remaining for your workout.
SPEED:Indicates how fast the foot pads is moving.
HEART RATE:Shown as BPM (beats per minute). Used to monitor your heart rate (displayed when contact is made with both pulse grips or Bluetooth heart rate was connected).
BLUETOOTH:Indicates the Bluetooth was connected to the machine.
RPM:Indicates Revolutions Per Minute.
LEVEL:Indicates the current resistance level.

GETTING STARTED

Check to make sure no objects are nearby that will hinder the movement of the exercise bike.
Plug in the power cord to power the exercise bike ON. (Switch is located at the bottom-front of the exercise bike.)
Set User Weight using and press ENTER.
You have the following options to start your workout:

A) QUICK START UP
Simply press to begin working out.
Time, distance and calories will all count up from zero.
The resistance level will default to level 1.
B) SELECT A PROGRAM

Use to scroll through programs
Press to select your desired program.
Set workout level using and press .
Press to begin workout.
NOTE: You can adjust the resistance level during your workout.

FINISHING YOUR WORKOUT
When your workout is complete, the console will display “workout complete” and beep. Your workout information will stay displayed on the console for 60 seconds and then reset.
TO RESET THE CONSOLE
Hold key for 3 seconds.
TO CLEAR CURRENT SELECTION
To clear the current program selection or screen, hold the button for 3 seconds.

PROGRAM INFORMATION

MANUAL:Allows you to adjust the resistance level to your preference, without a preset program. Adjust your resistance manually during your workout. User sets time and resistacne using (up/down arrow) and ENTER.
INTERVALS:Improves your strength, speed and endurance by raising and lowering the resistance levels through-out your workout to involve both your heart and muscles. Time based program with 12 levels to choose from.
WEIGHT LOSS : Promote weight loss by rasing and lowering the resistance level, while keeping you in your fat burning zone. Time based program with 12 levels to choose from. User sets time and level using (up/down arrows) and ENTER. Please drink enough water while and after doing exercise to enhance the weight loss results.
ROLLING: Maintains weight by gradually raising and lowering the resistance level to gradually raise and lower your heart rate.
CADENCE:Special designed chart based program that will simulate resistance being changed randomly.
DISTANCE GOAL:Resistance changes and all segments every 0.16 km and repeat (warm up does not repeat).
CALORIES GOAL:Resistance changes and all segments every 20 calories and repeat (warm up does not repeat).
CHALLENGE: During this work out, record as a record based on the value of the distance goal program. Compare the speed between the sport and record per 0.16 km. For example, the speed of the first 0.16 km of the record is 10, when the distance of the first 0.16 km of this sport is 11. In the second 0.16 km, the motion icon of sport will advance two grids, the record will only advance one, simply put, faster, two grids forward, slower, only one grid forward.
THR ZONE :Simulate the intensity of your sport as the program resistance automatically adjust to maintain a set Target Heart Rate range.
(Suggest to use bluetooteh chest belt with this program. You may purchase chest belt separately from your dealer). Heart Rate| Resistance Function| Resistance Adjust
---|---|---
20+ under target| Increase every 10 seconds| 1
6-19 under target| Increase every 35 seconds| 1
+/- 5 of target| No Change| 0
6-10 over target| Decrease every 35 seconds| 1
11-19 over target| Decrease every 10 seconds| 1
20-24 over target| Decrease every 10 seconds| Half of current
25+ over target| Console reset| N/A reset
CUSTOM1:Customized workout, time defaults to 15 minutes.

First enter the program setting and profile display will guide you through all the work out column.
Use upper and lower arrow to change the resistance and press enter to confirm. Console will display your current segment number and guide you through segment 1 to segment 15.
After finish all setting press START to begin.

ENERGY SAVER (STANDBY MODE)
This machine has a special feature called Energy Saver mode. This mode is NOT automatically activated. When Energy Saver mode is activated, the display will automatically enter standby mode (Energy Saver mode) after 15 minutes of inactivity. This feature saves energy by disabling most power to the machine until a key is pressed on the console.

Waste Disposal
HORIZON Fitness products are recyclable.
At the end if its useful life please dispose of this article correctly and safely (local refuse sites).