ARRIS Qianson QX3600 3.6KWH New Energy Portable Power Station User Manual

Qianson QX3600 3.6KWH New
Energy Portable Power Station User Manual

Productoverview

This product is a portable power storage product for home and outdoor, with large capacity, small size, light weight, high safety and large output power. Can be quickly split  into two small power storage for separate use; Two modules can work alternately to keep the load never power off; multiple output interface to meet all kinds of small  household appliances, diversified input mode can be used i n a variety of situations power supply; For indoor and outdoor electricity necessary products.

Parameterspecification

Basic parameters

Output specifications

The input specifications

The battery specification

discharge protection, over-charge protection, overload protection,Short circuit protection, overcurrent protection

Operating temperature

Noviceguide

3.1 Product Appearance

3.2 Interface description

Products use

Power on,sleep, standby and power off

• Power on: press the power switch to turn on the device.After the device is turned on,the display screen enters the power on interface,and the power switch  indicator is always on;
• Sleep: The default sleep time of the product is 15 minutes. If the product is idle for 15 minutes without any operation (the socket switch is turned off), the product will  enter the sleep state.At this time,the display screen will enter the statistics interface, and then enter the sleep interface;
• Standby:The default standby time of this product  is 15 minutes. If the socket switch is not turned on and there is no load connected, it will automatically shut down after 15 minutes;
• Shutdown: long press the power switch,the display screen will enter the statistical information interface,and then enter the sleep interface;
• Battery pull-out:under the power on interface, turn off the socket switch,briefly press the power switch twice, enter the battery pull-out selection interface, select the  socket switch (confirm),the battery pops up, select the power switch(cancel),the battery does not pop up, and return to the power on interface;
• Socket opening: when the machineis turned on, press the socket switch briefly once to open the socket;
• The socket is closed: when the machine is turned on, press the socket switch briefly once,and the socket is closed;
• Function setting interface:
  A During the time period when the power on interfaceis displayed during the power on process, press the socket switch 4 times continuously to enter the state of  the in terface with function settings;
  B.Press the power switch twice to enter the setting interface.Press the socket switch briefly to select the items to be set;
  Note: The factory default is simple in terface mode;

3.4 Battery Packs Installation and Removal Instructions

1 , Press the power switch to start the machine.| 2, Double click the power switch to enter the battery pop-up page.

3, Press the socket switch briefly to eject the battery.

3.5 120V AC input/output operation
Input: Directly plug into 120V power supply to charge.

 Output: Under the state of power on, press the socket switch and insert the electrical equipment after the button indicator lights up.
3.6 Car jack input\output operation
Input:
When the machine is turned on, plug i n the charging plug to start charging.

• This product can be charged by using the car charger port on the car , This product supports 12V/24V car charging, and the default charging current is 84.
  Itis recommended to use the car to charge the car in the starting state to avoid causing the car battery to lose power and cannot start.

Input:
When the machine is turned on, plug i n the charging plug to start charging
Solar energy charging
Users can connect solar panels i n series to charge the product as shown i n the figure.The dc input voltage range of this product i s 12v-40v,the maximum charging power is 400W.

*Before connecting the solar panel, please make sure that the output voltage of the solar panel is within 40V to avoid damage to the product.

3.8 TYPE-C Output operations
When the machine is turnde on,it can be directly inserted into the elecerical qquipment for use.

3.9 USB Output operations
When the machine is turnde on,it can be directly inserted into the elecerical qquipment for use.

Frequentlyasked questions

1. What type of battery does the product use ?
   This product uses high energy, high safety solid state lithium ion battery.

2. What equipment can product ac export lake ?
   The rated power of the AC outlet is 1600W, which can supply power to most household appliances. However, it is recommended that you check the power of the  appliance before use and ensure that the sum of the power of all loaddevices is less than the rated power.

3. How do you know how long a product will last ?
   The e-ink display displays the remaining time, which can be estimated for electrically stable devices,

4. How can you tell if a product is charging ?
   When charging, the screen will show the remaining charging time, the percentage change of battery power, the change of battery capacity indicator and the input power.

5. How to clean this product ?
   Please use a dry, soft, clean cloth or paper towel to wipe the product,

6. How to store Products ?
   When storing, please first turn off the product, and then store it in a dry, ventilated, room temperature environment. Do not place this product near water sources. For  long-term storage, it is recommended to discharge the battery to 30% and then charge it to 60% every three months to prolong the service life of the product.

7. 10/5000 Can this product be carried on the plane ?
   Can not be,

8. Is the actual output capacity of the product consistent with the capacity stated in the user manual ?
   The capacity specified in the user manual is the rated capacity of the battery pack. Due to the efficiency loss in the charging and discharging process, the actual output  capacity of the product is lower than the capacity specified in the user manual.

Safe use guide

5.1 use

1. Do not put the product near heat source, such as fire source or heating furnace when it is  working.
2. Do not let the product touch any liquid. Do not immerse the product in water or make it wet. Do not use this product in rain or wet environment.
3. Do not use this product in the environment of strong static electricity or magnetic field.
4. It is forbidden to disassemble or prick the product with sharp objects in any way.
5. Do not use wires or other metal objects to cause short circuit of the product.
6. Do not use non-official parts or accessories. If replacement is required, please go to the official sales channel for relevant purchase information.
7. When using this product, please strictly follow the environment temperature specified in this user manual. If the temperature is too high, the battery may fail. If the  temperature is too low, the performance of the product will be seriously degraded, and even it cannot meet the requirements of normal use.
8. Do not pile other heavy objects on the product.
9. It is forbidden to block the fan or keep the product in an unventilated or dusty space during use.
10. Please avoid collision, falling and strong vibration. In case of serious external force impact, please immediately turn off the power and stop using. Please fix it to avoid vibration and impact during transportation.
11. If the product accidentally falls into water during use, place it in a safe, open area away from the product until the product is completely dry. The dried products shall not be used again and shall be properly disposed of in accordance with the methods described in Section 5.2 Abandonment. In case of fire, use fire extinguishing equipment in the following recommended order: water or water mist, sand, fire blanket, dry powder, and carbon dioxide extinguisher.
12. If there is dirt on the interface of this product, please use a dry cloth to wipe it clean.
13. Please place the product carefully to prevent damage caused by dumping. If the  product is dumped and seriously damaged, shut it down immediately. Place the battery in an open area away from combustibles and people, and discard it according to local laws and regulations.
14. Keep the product out of reach of children and pets.

5.2 Abandoned

1. If conditions permit, discharge the battery completely before placing the product in the specified battery recycling bin. This product contains batteries, batteries are  dangerous chemicals, do not waste in the ordinary dustbin. For details, follow the local laws and regulations on battery recycling and disposal.
2. If the battery cannot be completely discharged due to the fault of the product itself, do not dispose the battery directly in the battery recycling box. Contact a  professional battery recycling company for further treatment.
3. If the battery cannot be started after overdischarge, press Discard.

After-sales service and support

1. From the date of purchase, the product shall enjoy free maintenance services under the following conditions (1) or (2). (1) Within 2 year; (2) Within 1500 use cycles;
2. Non-warranty coverage : (s) The product is faulty due to human causes ; (2) Force Majeure: Product failure caused by natural disasters such as earthquake and fire ; (3) Self-disassembly, repair caused by product failure.

After-sales service card

user name|
---|---
Contact Number|
Purchase date|
Product model|
Address of the user|
Sales unit|
Fault descriptor|

Error Code List

Error code
E001| Error description
A battery overcharge protection| Solution
Stop charging and wait for automatic recovery
---|---|---
E002| A battery overdischarge protection| Pausethe discharge and plug in the tharging plug to charge in time
E003
E004| A battery discharge overcurrent protection
A battery charge overcurrent protection| Stop discharging and wait for automatic recovery Stop charging and wait for automatic recovery
E005
E006| A battery discharge overtemperature protection
A battery discharge overtemperature protection| Stop charging and wait for automatic recovery
Stop charging and wait for automatic recovery
E007
E008| A battery SOC protection
B battery overcharge protection| Stop charging and wait for automatic recovery
Stop charging and wait for automatic recovery
E009
E010| B battery overdischarge protection
B battery discharge overcurrent protection| Pause the discharge and plug in the charging plug to charge in time Stop discharging and wait for automatic recovery
E011
E012| B battery charge overcurrent protection
B battery discharge overtemperature protection| Stop charging and wait for automatic recovery
Stop charging and wait for automatic recovery
E013
E014| 8 battery charge overtemperature protection
B battery SOC protection| Stop charging and wait for automatic recovery
Stop charging and wait for automatic recovery
E015| Inverter input short circuit protection| Stop using,remove load and charging plug,restart battery
E016
E017| Inverter input overload protection Inverter input undervoltage protection| Stop usingwait for automatic recovery,reduce the use power
Stop using and plug in the charging plug to charge in time
E018
E019| Inverter input overvoltage protection
Inverter input overtemperature protection| Stop charging and wait for automatic recovery
Stop charging and wait for automatic recovery
E020| LV hardware error| Stop using,remove load and charging plug,restart battery
E021
E022| HC hardware error
Inverter communication is abnormal| Stop using,remove load and charging plug,restart battery
Stop using,remove load and charging plug,restart battery
E023| Inverter output overcurrent protection| Stop using,wait for automatic recovery,reduce the use power
E024| Inverter output short circuit protection| I Stop charging and wait for automatic recovery
E025| Inverter output undervoltage protection| Stop using,remove load and charging plug,restart battery
E026| Inverter DC overvoltage protection| Stop charging and wait for automatic recovery
E027| Inverter DC undervoltage protection| I Stop charging and wait for automatic recovery
E028| Inverter output zero crossing error| Stop using,remove load and charging plug,restart battery
E029| Inverter output overtemperature protection| Stop charging and wait for automatic recovery
E030| Inverter input-output overvoltage| I Stop charging and wait for automatic recovery
E031| Inverter parameter configuration error| Stop using,remove load and charging plug,restart battery
E032| DC input voltage abnormal| Stop using,remove load and charging plug,restart battery
E033| DC output voltage abnormal| Stop using,remove load and charging plug,restart battery
E034| Inverter hardware failure| Stop using,remove load and charging plug,restart battery
E035| A battery sampling abnormality| Stop using,remove load and charging plug,restart battery
E036| B battery sampling abnormality| Stop using,remove load and charging plug,restart battery
E037| A battery MOS tube is abnormal| Stop using,remove load and charging plug,restart battery
E038| B battery MOS tube is abnormal| Stop using,rennove load and charging plug,restart battery
W001| Low battery warning| Indicates that the battery is low,it is recommended to charge it in time
W002| Battery temperature alam(c.rging 60°C disdiarging 65°C)| Prompt that the temperature of the internal inverter is high, it is recommended to reduce the power to use at this time
W003| Inverter pre stage temperature alarm’X’Q| Prompt that the temperature of the internal inverter is high, it is recommended to reduce the power to use at this time
W°°4| Inverter post-stage temperature alarm (80°C)| Inverter Past stage temPeratere alarm ”” ‘-‘
Prompt that the temperature of the internal inverter is high, it is recommended to reduce the power to use at this time
W005| Full bridge (aluminum cylinder) temperature alam(100°C)| Prompt that the temperature of the internal inverter is high, it is recommended to reduce the power to use at this time

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>