SOUNDPEATS 5.2 Wireless Bluetooth Earphones Owner’s Manual
- June 4, 2024
- SoundPEATS
Table of Contents
SOUNDPEATS 5.2 Wireless Bluetooth Earphones
Pairing
- The earbuds outomotlcolly pair to each other or are taken out from the charging case. The indicator of the main earbud flashes in orange and white alternately, and the indicator of the second eorbud stays on white.
- Activate Bluetooth on the device, and hit “SOUNDPEATS Sonic Pro” on the Bluetooth list to pair.
Reset
- Clear the pairing record on your devices.
- Place back both earbuds into the charging case and make sure they are In charging status.
- Press and hold both MFBs for 10s until both LEDs on the earbuds flash white twice, reset completely.
Wearing
Product Diagram
Button Control
| Function | Operation |
|---|---|
| Powera- i | Auto: Take out the earbuds from the charging |
case
Manually: Press and hold the MFB for 1.5s
Power Off| Auto: Place back the earbuds into charging case
Manually: Press and hold the MFB for 8s
Play / Pause| Single tap the MFB
Volume-| Double tap the left MFB
Volume+| Double tap the right MFB
Previous Track| Press and hold left MFB for 1.5s
Next Track| Press and hold right MFB for 1.5s
Answer/ Heng Up Phone
Cd
| Single tap the MFB
Reject Phone Cdl| Press and hold the MFB for 1.5s
Switch Between Two Calls| Press and hold the MFB for 2s
Manuany Enter Pairing
Mode
| Press and hold the MFB for 5s
Activate Voice Assistant| Tnple tap MFB on nght earbud
Gone Mode| Tnple tap MFB on left earbud
Tun On/Off the lnclcator| Tap the MFB for 4 times
Game Mod
soundpeats Sonic Pro uses the latest technology and is equipped with game mode. In the game mode, earbuds’ delay will be greatly reduced to ensure the synchronization of the game audio and picture. Triple tap MFB on the left earbud to turn on/off the game mode. The earbud prompts RGame ModeR when the mode Is on, and prompts nExtt Game Mode” when It’s off.
QA
Ql: What do Ille charging LEDs tell while charging the case?
The LEDs stay on while charging, and turn off after fully charged. When taking out/placing back the earbuds, the indicator of the headset will light up for lOs to show the current battery status of the charging case:
- 100%-50% Shows Green
- 49%-10% Shows Yellow
- Below l 0% Shows Red
When charging the charging case, the Indicator will flash slowly:
- Below 20% The Indicator flashes in red slowly
- 20%-69%i The Indicator flashes in yellow slowly
- 700::.-99% The Indicator flashes in green slowly
- 100% The Indicator stays on green
Q2: How lo charge the case?
- .Use a Type-C adopter to charge the case (current not over lA). The LED stays on while charging.
- Please charge the earbuds and case at least once per 3 months when not in use for a long time.
- lf the charging case supports charging via a wireless charging pad, please put It on a pod. Charging starts with LED light up and stay on.
Q3: Why are the earbuds still connected lo my phone after placing back?
- The charging case Is out of battery. The case will not turn off the earbuds if the case battery is dead.
- Please make sure the earbuds sit well in the charging case, and the charging contactors on both the earbuds and charging case are clean. If not, please try something like a microfiber cloth to clean the contractors.
Q4: There Ille Is not as advertised?
A single charge will not give you 35 hours of playtime constantly. The earbuds
work around 15 hours per charge with overage use. The charging case provides
another 2 recharges.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and. if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does Cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following meaSures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is Connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- this device must accept any interference received, including interference that may cause undesired operation. Changes or modifcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.