moa MB10 Mini Blender Instruction Manual

moa MB10 Mini Blender

BEFORE USE

Before use, please read this manual carefully.
Only connect the appliance to an earthed wall socket.
This appliance is for household use only. When using electrical appliances, basic safety precautions should always be followed to avoid fires, electric shocks, burns, or other in·\uries and damage. Read these operating and safety instructions carefu ly.

IMPORTANT SAFEGUARDS ( 1 /3)

1. To disconnect, grasp plug and unplug cord from electrical outlet.
2. To protect against risk of electrical shock, do not immerse the cord, plug or motor base in water or any other liquids.
3. Do not let cord hang over edge of table or counter or touch hot surfaces.
4. Never leave appliance unattended when in use.
5. Close supervision is necessary when used by or near children.
6. Avoid contact with moving parts. Keep hands and utensils out of sport bottle while blending to prevent personal injury or damage to the blender.
7. The blade is sharp. Handle with care.
8. To reduce the risk of injury, never place cutter-ossembly blades on base without sport bottle properly attached.
9. Do not attempt to bypass the interlock system that powers the unit on.
10. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or is dropped or damaged in any manner. Return the appliance to the nearest Authorized MOA appliance Service Center for examination, repair or electrical mechanical adjustment.
11. Do not use outdoors or for commercial purposes; this appliance is for household use only.
12. Always operate on a flat surface.
13. Unplug the blender when not in use, before taking off or putting on parts and before cleaning.
14. Use this appliance for its intended use as described in this manual. The use of attachments not made by the manufacturer, including canning or ordinary jar and processing assembly parts, is not recommended by MOA and may cause a risk to persons. In case of demage and deformation the bottle, do not blend hot liquids and ingredients in the blender. Maximum tempreture of which is 60 °C.
15. When handling hot liquids, use extra caution, because they may release steam or may splash and scald the user. Before pouring hot liquids into the blending container and blending them, suggesting that let them cool to at least 40 °C.
16. Do not use outdoors or for commercial purposes; this appliance is for household use only.
17. Always operate on a flat surface.
18. Unplug the blender when not in use, before taking off or putting on parts and before cleaning.
19. In case of demage and deformation of the parts. Do not usd hot water and disinfecting cabinet that tempreture exceed 60 to wash or sterilize them.
20. Use this appliance for its intended use as described in this manual. The use of attachments not made by the manufacturer, including canning or ordinary jar and processing assembly parts, is not recommended by MOA and may cause a risk to persons.
21. This appliance is not intended for use by persons(including children) with reduce physical, sensory or mental capabilities, or lack ofexperience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

WARNING: This appliance comes with a thermal resettale fuse feature to prevent damage to the motor in the case of extreme overload. Should the unit shut off unexpectedly, unplug it and let it cool for at least 30 minutes before continuing.

PARTS AND DISCRIPTION

1. Spill -Proof Drinking Lid
2. Blending Bottle
3. Blode Assembly
4. Blender Base
5. Motor Unit
6. Switch Button

USING YOUR BLENDER

Clean blender according to the instructions in the “Cleaning and Storing Your Blender” section.

1. Screw off the lid, place the blending bottle on a flat surface with the open end facing up. Fig.1 Fill the blending bottle with your favorite ingredient. Fig.2 Add water or milk into the blending bottle Fig.3
   NOTE: Never add ingredient and liquid that past the MAX marking.
   Suggested ussages

   • Ingredient – 240g
   • Water or milk – 360g
   • Total capacity – 600g

2. Fasten the blade assembly on the open end of the blending bottle. Fig.4 Turn the blending bottle upside down, line up arrows on the blade assembly to the arrows on the base, and place the blending bottle in the base.To lock the blending bottle in the base for hands-free operation, simply turn the blending bottle clockwise in the base. Fig.5

3. Before using the blender, please check that the main voltage corresponds to the one show on the appliance rating label. All the lights flashing indicate that the appliance is ready to run. Press the switch button, the related speed light on, motor will run in high and low speed recurrently,this program is to make the appliance running more smoothly.When running, the stage lights will light on one after other, to indicating the different program stages.When finish operation, all the stage lights light on and the speed lights keep Flashing.
   Note:Press each of the speed lights can stop the appliance when in operation. Do not leave the appliance continuously operating for more than 1 minute. Before restarting, let it cool for at least 2 minutes.
   Press SOFT button, the working time is 40second, this program is good for blending the softer food, such as strawberries, tomatoes, bananas etc. Press HARD button, the working time is 60second, this program is good for blending the harder food, such as carrots, apples, pears etc.

4. Turn the sport bottle over and place on a flat surface. Replace the blade assembly with the drinking lid. Take the sport bottle with yuo throughout the day to stay hydrated.

TIP: AfterJou’ve consumed your blended beverage, wash out the sport bottle an resuse it throughout the day for water or other cold liquids.
Note: For optimal performance, place desired ingredients in the Sport Bottle according to the following order: Liquids, fresh ingredients, frozen fruit, yogurt and ice cream.

BLENDING TIPS

1. Put liquids in the cup first, unless a recipe says otherwise.

2. Cut all firm fruits and vegetables into pieces no larger than 3/4 inch (1.8cm) to 1 inch(2.5cm).

3. Don’t overload sport bottle. If the motor stalls, turn the blender off immediately, unplug the unit and let it cool for at least 15 minutes.
   Then, remove a portion of the food and continue.

4. This blender will not mash potatoes, whip egg whites or substitute dairy toppings, mix stiff dough or grind raw meat.

CLEANING AND STORING YOUR BLENDER

• IMPORTANT: UNPLUG BEFORE CLEANING. DO NOT IMMERSE THE BLENDER BASE IN WATER OR ANY OTHER LIQUID.
• Use a damp, soft sponge with mild detergent to clean the outside of the blender base. All parts except for the blender base are dishwashersafe. You can also wash the parts, except the blender base, in warm, soapy water. Rinse well and dry.
• After cleaning, reassemble blade assembly to open end of the sport bottle and then place in the blender base. Snap the drinking lid on the other end of the sport bottle.

DISPOSAL
Do not dispose of the device in normal domestic waste. Dispose of the device over a registered waste disposal firm or through your communal waste disposal facility. Observe the currently valid regulations. In case of doubt, consult your waste disposal facility.

WARRANTY

Dear Valued Customer, Thank you very much for purchasing a MOA product. We wish you to inform you that this product is covered by a warranty which complies with all legal provisions concerning existing warranty and consumer rights in the country where the product was purchased. Should you find any defect or malfunction of your MOA product, please contact the appropriate Customer Care Center. Sincerely yours, TheMOA Team.

www.moacolors.com.

References

• MOA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>