ULTIMEA U2520 Poseidon D60 5.1 Channel Dolby Atmos Soundbar User Manual
- June 12, 2024
- ULTIMEA
Table of Contents
- ACCESSORIES LIST
- SOUNDBAR CONTROLS
- CONNECT TO TV VIA eARC / ARC
- CONNECT TO TV VIA OPTICAL / AUX
- CONNECT TO BLUETOOTH
- CONNECT TO SUBWOOFER AND SURROUND SPEAKERS
- PAIRING SUBWOOFER
- PLACEMENT OPTIONS
- WALL MOUNT INSTALLATION
- SPECIFICATIONS
- SAFETY INSTRUCTIONS
- PROPER DISPOSAL INSTRUCTIONS
- FCC REGULATORY COMPLIANCE
- ISED WARNINGS
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
User Manual
Poseidon D60
Model No.: U2520
Poseidon D60 5.1 Channel Dolby Atmos Soundbar
WE ARE READY TO HELP
Prefer video tutorial?
Setup guidance video, USER MANUAL or Trouble Shooting on ULTIMEA website.
+1 888-598-8875(US) Mon-Fri 9am-
5pm(PST)
+49 89-628-25828(EU) Mon-Fri 9am-5pm(CET)
ACCESSORIES LIST
SOUNDBAR CONTROLS
Control Panel
- “ ”: Power Button Press to power on / Hold for 3 seconds to power off.
- “ ”: Input Mode Press to switch channels: eARC-BT-OPT-AUX-USB.
- “ ”: Bluetooth Press to switch to BT channel and enter pairing mode. Hold for 3 seconds to disconnect current device and choose to connect to a new device manually on your mobile phone / PC / TV (BT ID: Poseidon D60).
- “ ”: Volume Down
- “ ”: Volume Up
Note: When input Dolby Atmos source, ‘Dolby Atmos’ will be indicated as below.
Remote Control
-
“ ” : Power Button
Press to power on / Hold for 3 seconds to power off. -
“ ” : eARC
Press to switch to HDMI eARC channel. -
“ ”: BT
Press to switch to BT channel and enter pairing mode. Hold for 3 seconds to disconnect current device and choose to connect to a new device manually on your mobile phone / PC / TV (BT ID: Poseidon D60). -
“ ”: OPT
Press to switch to OPT channel. -
“ ”: AUX
Press to switch to AUX channel. -
“ ”: EQ
Press to switch among Movie, Dialogue, Music mode, the display will show: “Eq01”, “Eq02”, “Eq03”. -
“ ”: USB
Press to switch to USB channel. -
“ ”: Volume Up
-
“ ”: Volume Down
-
“ ”: Previous
BT and USB mode: Skip to previous track. -
“ ”: Next
BT and USB mode: Skip to next track. -
“ ”: Play / Pause
For BT and USB mode only.
USB mode: Hold for 3 seconds to switch between single loop playback and list loop playback. -
“ ”: Surround
Press to adjust surround sound level, the display will show: . -
“ ”: BASSMX
Press to adjust bass level, the display will show: . -
“ ”: Mute / Recover the volume.
CONNECT TO TV VIA eARC / ARC
Note:
Your TV’s HDMI port needs to support eARC to transmit the Dolby Atmos audio
format to your Soundbar.
Atmos:If you are watching a movie in the Dolby Atmos format, please set the
audio output on your TV to Pass Through:
TV Settings > Home > Settings > Sound > Digital Audio Output > Pass Through
DTS: If you are watching a movie in the DTS format, please set the audio
output on your TV to PCM:
TV Settings > Home > Settings > Sound > Digital Audio Output > PCM
What’s the difference between: HDMI IN, HDMI ARC, HDMI eARC?
- HDMI IN is a standard HDMI input that allows you to connect devices to your TV or audio system. It supports audio and video signals, but it does not support audio return channel (ARC) or enhanced audio return channel (eARC) functionality.
- HDMI ARC is a special HDMI port that supports two-way communication between your TV and audio system. This means that audio can be sent from your TV to your audio system, and audio system can send audio back to your TV.
- HDMI eARC (Enhanced Audio Return Channel) is an updated version of HDMI ARC that supports higher quality audio formats such as Dolby Atmos and DTS:X.
Note: Please turn on the “CEC” function on your TV.
When eARC / ARC is connected, your TV remote control can control the soundbar
and TV simultaneously:
- Turn on / off
- Adjust the volume
CONNECT TO TV VIA OPTICAL / AUX
- Make sure the TV’s port is OPTICAL OUT, connect both sides of the cable to OPTICAL, for both the TV and the soundbar.
- Make sure the optical plug is inserted correctly as it shows in the picture. Do not insert the plug upside down and break the optical.
Note: If audio is playing from the internal TV speakers, mute or minimize the TV volume.
- Connect the 3.5mm to 3.5mm Audio Cable to your TV’s AUDIO OUT port.
- Not support AUDIO IN port on TV.
Note: Please remember to unplug the AUX cable from TV and Soundbar when
you want to switch to other mode.
In Optical Mode: If there is no sound, try setting the TV audio output to PCM:
TV Settings > Home > Settings > Sound > Digital Audio Output > PCM
CONNECT TO BLUETOOTH
- Press the “ ” button on the soundbar or remote control to enter Bluetooth pairing mode.
- Go to the Bluetooth setting on your phone, find and select “Poseidon D60” to connect the soundbar.
Note: If it’s already in the Bluetooth mode and connected, press and hold “ ” button for 3 seconds to disconnect current device and choose to connect to new device manually on your mobile phone / PC / TV.
CONNECT TO SUBWOOFER AND SURROUND SPEAKERS
- Use the 6m RCA-RCA cables to connect the subwoofer and surround speakers, please pay attention to match the same color interfaces on the surround speakers with the corresponding ones on the subwoofer and place the surround speakers accordingly.
- Use power cable to connect your subwoofer and power port.
PAIRING SUBWOOFER
The subwoofer has been paired with the soundbar by ULTIMEA.
However you may need to re-pair the soundbar and subwoofer if there is no
sound coming from the subwoofer.
Step 1:
Press and hold the “ BASS Mx™ ” button on the remote control for 5 seconds,
the display will show “SUb” flashing.
Step 2:
Press and hold the ON/OFF button on subwoofer for 5 seconds, the white LED
will be fast flashing. The white LED will be solid on when the subwoofer is
paired successfully.
PLACEMENT OPTIONS
- The soundbar and surround speakers should be placed at or near ear level.
- For a better listening experience, please choose one of the two placement options shown in the illustration above based on your home environment.
WALL MOUNT INSTALLATION
Note: Wall-mounted surround speakers follow the same configuration as shown in the above pictures
SPECIFICATIONS
Model Number | U2520 |
---|---|
Power Supply | AC 100-240V, ~50/60Hz |
Soundbar Drivers | 2.25″ x 3 (Soundbar) + 2.25” x 2 (Surround Speaker) + 5.25” |
(Subwoofer)
Frequency Response| 40Hz – 18kHz
Standby Power| <0.5W
Operating Temperature| 0°C – 45°C/32°F – 113°F
Dimensions and Weight
Soundbar| 400(W) x 70(H) x 90(D)mm 15.7” x 2.8” x 3.5”
Subwoofer| 155(W) x 244(H) x 215(D)mm 6.1” x 9.6” x 8.5”
Surround Speaker| 135(W) x 70(H) x 90 (D)mm 5.3” x 2.8” x 3.5”
Packaging| 335(W) x 442(H) x192(D)mm 13.1” x 17.4” x 7.5”
Net Weight| 5.3kg / 11.68lbs
Gross Weight| 6.8kg / 14.99lbs
SAFETY INSTRUCTIONS
Please read this user manual carefully and save it for future reference.
Do not make unauthorized alterations to the product, doing so may compromise safety, regulatory compliance, system performance, and may void the warranty.
- Avoid dropping.
- Do not disassemble.
- Do not submerge in water
- Avoid extreme temperatures.
- Do not use the device outdoors during thunderstorms.
- Use original or certified cables.
- Do not place dangerous items on top of this device (e.g. liquid filled objects, lit candles).
- Clean with a dry, soft lint-free cloth. Do not use any corrosive cleaner or oil.
- To avoid hearing damage, do not listen for extended periods at high volume.
- Do not expose the batteries to extreme heat sources such as direct sunlight or open flames.
- The ideal operating temperature for this product and its accessories is between 41°F/5°Cand 95°F/35°C.
- The adapter should be installed near the device and should be easily accessible.
- Do not use this product in environments of extreme heat or cold. Never expose this device to strong sunshine or wet environments.
PROPER DISPOSAL INSTRUCTIONS
This mark shown on the product or its packaging, indicates that this product
should not be disposed of with other household waste at the end of its working
life.
To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources.
Waste Electrical & Electronic Equipment
Household user should contact either the retailer where they purchased this
product, or their local government office, for details of where and how they
can take this item for environmentally safe recycling.
Business users should contact their suppliers and check the terms and
conditions of the purchase contract. This product should not be mixed with
other commercial wastes for disposal.
FCC REGULATORY COMPLIANCE
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interfer.
ence by one or more of the following measures:
– Reorient or relocate the receiving antenna. – Increase the separation
between the equipment and the receiver.
– Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference.
(2) this device must accept any interference received, including interference
that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter.
ISED WARNINGS
This device contains licence-exempt transmitter(s)/ receiver (s) that comply
with Innovation, Science and Economic
Development Canada’s licence-exempt RSS (s). Operation is subject to the
following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
This equipment complies with IC exposure limits set forth for an uncontrolled
environment. This equipment shall be installed and operated with a minimum
distance of 20cm between the radiator & body.
Declaration of Conformity
We (Manufacturer is responsible for this declaration)
Dynanic (Shenzhen) Technology Limited (Company name)
20th Floor, Building 4, Tianan Cloud Park, Bantian St.,
Longgang District Shenzhen, China 518000
(Company address)
Declare under our sole responsibility that the product
Trade Mark: ULTIMEA
Product Name: Poseidon D60 5.1 Channel Dolby
Atmos Soundbar
Model No.: U2520
To which this declaration relates is in conformity with the essential
requirement set out in the Council Directive on the Approximation of the laws
of the Member States relating to RED Directive (2014/53/EU) & RoHS (2011/
65/EU) product is responsible to affix CE marking, the following standards
were applied:
EN 55032:2015/A11:2020
EN 55035:2017/A11:2020
ENIEC 61000-3-2:2021
EN 61000-3-3:2013/A1:2021
ETSIEN 301 489-1 V2.2.3(2019-11)
ETSIEN 301 489-17 V3.2.4(2020-09)
EN 300 328 V2.2.2(2019-07)
EN 50663:2017
ENIEC 62368-1:2020+A11:2020
IEC62321-3-1:2013
IEC 62321-4:2013+A1:2017
IEC 62321-5:2013
IEC 62321-6:2015
IEC 62321-7-1:2015
IEC 62321-7-2:2017
IEC 62321-8:2017
Full Name: Yoyo.Yu
Position: Approbation Manager
Signature:
Place/Date: Shenzhen,China/Dec.25-2022
Trade Marks:
Dolby, Dolby Atmos, and the double-D symbol are registered trademarks of Dolby
Laboratories Licensing Corporation.
Manufactured under license from Dolby Laboratories. Confidential unpublished
works. Copyright 2012-2021 Dolby Laboratories. All rights reserved.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Soundlab Technology Co.,Ltd. is under license. Other trademarks and trade names are those of their respective owners.
The Adopted Trademarks HDMI, HDMI High-Definition Multimedia Interface, HDMl trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other.
Poseidon D60 5.1 Channel Dolby Atmos Soundbar Model No.: U2520
Dynanic GmbH
Buchenring 57, 22359 Hamburg, Germany
UK Crossborder limited
7 Bell Yard London WC2A 2JR, UK United Kingdom
Made in China Manufacturer: Dynanic (Shenzhen) Technology Limited Address:
20th Floor, Building 4, Tianan Cloud Park, Bantian St., Longgang District,
Shenzhen, China 518000
If you need our support, kindly reach out to our service team. We are always glad to help.
+1 888-598-8875 (US)
Mon-Fri 9am-5pm (PST)
+49 89-628-25828 (EU)
Mon-Fri 9am-5pm (CET)
support@ultimea.com
support@ultimea.de
support.ultimea.com
support.ultimea.de
https://web-u.shengcai.net/bnl7/H666G_WoSGG