WYZE v3 Pro Outdoor Cam User Guide

: June 12, 2024
: Wyze

Table of Contents

GET BETTER SECURITY WITH Cam plus
IN THE BOX
STATUS LIGHT GUIDE DURING INSTALLATION
FCC WARNING
WARRANTY
NEED HELP?
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

QUICK
Read this manual carefully and save it for future reference. WYZE v3 Pro
Outdoor Cam - Featured Image

GET BETTER SECURITY WITH Cam plus

Record Full-Length Videos
Get unlimited full-length video recordings.
Smart AI Detection
Detect people, packages, vehicles, and more.
Back-to-Back Event Recording
Capture everything without 5-minute gaps.
Exclusive Discounts
Get exclusive discounts on Wyze products.
Subscribe or learn more at services.wyze.com.

IN THE BOX

Mounting Tape × 1
Mounting Screw × 1
Quick Start Guide × 1
Wyze Cam v3 Pro × 1
USB Cable × 1
Wall Plate × 1
Power Adapter × 1

Spotlight
Microphone
Status Light
Lens
Speaker
Micro USB Port
MicroSD Slot (Card not included)
SETUP Button
1/4” Mount (Unscrew to access)
Mounting Hole

SETUP

Connect the camera to a power outlet and wait for 20 seconds or until the status light flashes red.
Download the Wyze app and sign in or create an account.
Press the SETUP button for 3 seconds or until there is a voice prompt.
Follow the instructions in the Wyze app to finish setup.
SPOTLIGHT
Turn the spotlight on and of manually from the live stream. Go to Camera Settings > Spotlight Settings to adjust the brightness, set schedules, and more.

Tip: The spotlight has two brightness levels,
Low for indoor use and High for outdoor use.

STATUS LIGHT GUIDE DURING INSTALLATION

| Solid red light
The device is powered on and initializing
---|---
| Flashing red light
The device is ready to connect
| Flashing red & blue lights
Connection is in progress
| Flashing blue light
The device is connected and ﬁnishing setup
| Solid blue light
The device is working properly

STATUS LIGHT GUIDE AFTER SETUP

| Solid red light
Live stream is being viewed or a recording is in progress
---|---
| Quickly flashing red light
Siren is in use
| Soild blue light
The device is working properly and no operations are running

FCC WARNING

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
FCC RADIATION EXPOSURE STATEMENT
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
ISEDC RSS WARNING
This device complies with ISEDC licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
ISED RADIATION EXPOSURE STATEMENT
This equipment complies with ISEDC RF radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Only use the power supply provided. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

WARRANTY

Your Wyze product is covered by a one-year limited warranty. You can view the limited warranty terms at https://wyze.com/return-warranty-policy or request a copy by contacting Wyze at +1 206-339-9646.
Apple logo and App Store are trademarks of Apple Inc., registered in the U.S. and other countries and regions. Google, Google Play, and the Google Play logo are trademarks of Google LLC.
Disclaimer: The products, accessories, user interfaces, etc. illustrated in this guide are intended for reference only. Due to product updates, the actual product and the illustrations in this guide may vary.