V-TAC VT-1134 Solar LED Bollard Light With Sensor Instruction Manual
- June 12, 2024
- V TAC
Table of Contents
V-TAC VT-1134 Solar LED Bollard Light With Sensor
TECHNICAL DATA
MODEL | VT-1134 |
---|---|
SKU | 23009 |
LUMENS | 150 Lm |
SOLAR PANEL | DC: 5.5V, 1.8W Polycrystalline |
BATTERY | 2000mAh, Li Battery, DC:3.7V |
CHARGING TIME | 8-10 Hours |
WORKING TIME | 6-8 Hours |
SENSOR | Microwave Sensor 360° |
BULB WATTS | 2.5W |
BULB HOLDER | E27 [One Bulb Included] |
SENSOR RANGE | 3-4 M |
COLOR TEMPERATURE | 3000K |
DIMENSION | 120x120x800mm |
MATERIAL | Aluminium + PC |
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 3 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only
MULTI-LANGUAGE MANUAL QR CODE
Please scan the QR code to access the manual in multiple languages.
WARNING
- Please make sure to turn off the power before starting the installation.
- Installation should be done by certified electrician.
This marking indicates that this product should not be disposed of with other household wastes.
INSTALLATION DIAGRAM
INSTALLATION INSTRUCTION
- Open the lamp and install the bulb in the lamp.
- Drill two holes on the ground and insert two plastic expansion bolts in it.
- Fix the plastic plate on the plastic expansion piece with self-tapping screws.
- Fix the lamp body on the plate and tighten the screws.
- Switch on and test
FUNCTION OF SENSOR
- Press the switch(turn on)
- Turns 100% brightness when motion is detected and 10% light when people go away
- Turn off
MAINTENANCE & WARNING
- Do not use solvents, petrol, etc. Otherwise the light will be damaged.
- Clean the light with a dry, lint-free cloth.
- Check the solar panel for dirt regularly. If dirt or is present remove it to guarantee flawless function of the product.
- Especially during the winter, keep the product free from snow and ice.
- Confirm installation direction is correct (solar panel should be at top)
- Confirm no objects blocking the solar panel to receive sunlight
- Keep away from the fire.
- Don’t immerse in the water
Customer Support
In case of any query/issue with the product, please reach out to us at: support@v-tac.eu For More products range, inquiry please contact our distributor or nearest dealers. V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>