V-TAC VT-1136 Solar LED Wall Light with Sensor User Manual
- June 12, 2024
- V TAC
Table of Contents
WEEE Number: 80133970
INSTRUCTION MANUAL
SOLAR LED WALL LIGHT
WITH SENSOR
IP54 RATING
03 YEAR
**WARRANTY***
TECHNICAL DATA
| MODEL | VT-1136 |
|---|---|
| SKU | 23010 |
| LUMENS | 150 Lm |
| SOLAR PANEL | DC 5.5V, 1.8W Polycrystalline |
| BATTERY | 2000mAh, Li-Ion, DC: 3.7V |
| CHARGING TIME | 8-10 Hours |
| WORKING TIME | 6-8 Hours |
| SENSOR | Microwave Sensor 360° |
| BULB WATTS | 2.5W |
| HOLDER | E27 [One Bulb Included] |
| SENSOR RANGE | 3-4 M |
| COLOR TEMPERATURE | 3000K |
| DIMENSION | 185x120x260mm |
| MATERIAL | Aluminium+PC |
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the
best. Please read these instructions carefully before starting the
installation and keep this manual handy for future reference. If you have any
another query, please contact our dealer or local vendor from whom you have
purchased the product. They are trained and ready to serve you at the best.
The warranty is valid for 3 years from the date of purchase. The warranty does
not apply to damage caused by incorrect installation or abnormal wear and
tear. The company gives no warranty against damage to any surface due to
incorrect removal and installation of the product. The products are suitable
for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would
void the warranty. This product is warranted for manufacturing defects only.
MULTI-LANGUAGE MANUAL QR CODE
Please scan the QR code to access the manual in multiple
languages.http://vtac.store/vt-1136
WARNING
- Please make sure to turn off the power before starting the installation.
- Installation should be done by certified electrician.
This marking indicates that this product should not be disposed of with other household wastes.
INSTALLATION DIAGRAM
INSTALLATION INSTRUCTION
- Drill two holes on the wall and insert two plastic expansion bolts in it.
- Fix the plastic plate on the plastic expansion piece with self-tapping screws.
- Open the lamp and install the bulb in the lamp.
- Fix the lamp body on the plate and tighten the screws.
- Switch on and test
FUNCTION OF SENSOR
- Press the switch (turn on)
- Turns 100% brightness when motion is detected and 10% light when people go away
- Turn off
MAINTENANCE & WARNING
- Do not use solvents, petrol, etc. Otherwise the light will be damaged.
- Clean the light with a dry, lint-free cloth.
- Check the solar panel for dirt regularly. If dirt or is present remove it to guarantee flawless function of the product.
- Especially during the winter, keep the product free from snow and ice.
- Confirm installation direction is correct (solar panel should be at top)
- Confirm no objects blocking the solar panel to receive sunlight
- Keep away from the fire.
- Don’t immerse in the water
In case of any query/issue with the product, please reach out to
us at: support@v-tac.eu
For More products range, inquiry please contact our distributor or nearest
dealers.
V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>