LEDYi LY480-CSPW30 Flexible CSP LED Strip Installation Guide
- June 12, 2024
- LEDYI
Table of Contents
- LEDYi LY480-CSPW30 Flexible CSP LED Strip
- Product Information
- Product Usage Instructions
- Description
- Dimensions & Waterproof
- Product Specification
- Product Photometrics
- Light Distribution Curve
- Connector Connection
- Cable Connection
- Packing Information
- Precautions for use
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
LEDYi LY480-CSPW30 Flexible CSP LED Strip
Product Information
The LED Strip is a flexible CSP LED strip with a 8mm PCB and 480 LEDs per
meter. It operates on a DC24V voltage and has a power rating of 10W per meter.
The strip is available in IP20 and IP65CS waterproof ratings. The dimensions
of the strip are 5000x8x2mm, and it is equipped with a 5000mm red/black wire
measuring L=150mm and 18AWG. The chip type used is CSP, and there are 480
chips per meter. The step length between LEDs is 50mm. The strip has a beam
angle of 8 degrees and a CRI (Color Rendering Index) of over 90.
The product also provides photometric data, including CCT (Correlated Color
Temperature), Lumen output, efficacy (lm/w), R9 (CRI value for red), Rf
(Fidelity), and Rg (Gamut).
Product Usage Instructions
Connector Connection (IP20):
- Insert each end of the LED strip into the end of the connection terminal, ensuring that the metal clip is on the same side as the metal solder pad of the LED strip.
- After complete insertion, make sure both ends of the LED strip are tightly connected.
- Press the metal clip down with appropriate force using pliers to ensure that the metal clip is inserted into the appropriate position for a completed connection
Cable Connection (IP20):
- Insert one end of the LED strip and wire connector into both ends of the connection terminal, ensuring that the metal clip is on the same side as the metal solder pad of the LED strip.
- Meanwhile, make sure both ends are closely connected.
- Press the metal clip down with appropriate force using pliers to ensure that the metal clip is inserted into the appropriate position for a completed connection.
Packing Information:
- 5 meters per reel
- 1 reel per bag
- 60 bags per carton
- Carton dimensions: 26x28x68cm
- Carton weight: 10.8kgs
Precautions for Use:
- Avoid hitting the light-emitting area of the LED strip with hard objects to protect it.
- After unpacking, use the LED strip within 24 hours to prevent oxidation of solder joints.
- Avoid direct contact with high-temperature objects in the light-emitting area of the strip to prevent damage.
- The bend diameter at any position should be greater than 1cm to avoid damaging the strip.
Contact Information:
- Website:www.ledyi.com
- Email:sales@ledyi.com
- Telephone: +86 0755 2302 5890
Note: LEDYI may change product specifications and installation guidance without prior notice.
Part Number: LY480-CSPW30-W24-8MM-10W-IP20
Description
- 24V, flexible CSP LED strip (Step length: 24V=50mm)
- 10W, with 3M adhesive tape on the back for easy installed. Regular CCT: 2700K, 3000K, 4000K, 6000K, other customized CCT are available.
- 180° beam angle. Very good color reproduction with CRI>90.
Dimensions & Waterproof
Product Specification
| Dimension | 5000x8x2mm |
|---|---|
| Chip Type | CSP |
| Chips/m | 480pcs |
| Step LEDs | 24pcs |
| Step Length | 50mm |
| Voltage(V) | DC24V |
| --- | --- |
| Power(W/m) | 10W |
| CRI | >90 |
| Beam Angle | 180° |
| Operation Temperature | -20°C~45°C |
Product Photometrics
(Data base on IP20 CRI >90)
| CCT | Lumen | Efficacy | CRI | R9 | Rf | Rg |
|---|---|---|---|---|---|---|
| (K) | (lm/m) | (lm/w) | (>90) | (Fidelity) | (Gamut) | |
| 2700±100K | 955.1 | 95.51 | 90.8 | 46 | 88 | 94 |
| 3000±100K | 975.5 | 97.55 | 90.9 | 48 | 88 | 98 |
| 4000±200K | 986.1 | 98.61 | 91.8 | 56 | 87 | 96 |
| 6000±400K | 998.3 | 99.83 | 93.4 | 77 | 89 | 97 |
Light Distribution Curve
[Data base on 1m 10W IP20 6000K CRI >90, Unit:cd]
Connector Connection
(IP20)
- Insert each ends of led strips into the end of the connection terminal respectively, make sure the metal clip is on the same side as the metal solder pad of led strip.
- After complete the insert, also make sure both ends of led strip are tightly connected
- Press the metal clip down with the appropriate force using pliers to ensure that the metal clip is inserted into the appropriate position ,and connection completed.
Cable Connection
(IP20)
- Insert one end of led strip and wire connector into both ends of the connection terminal respectively to ensure that the metal clip is on the same side as the metal solder pad of led strip
- Meanwhile make sure both ends are closely connected, Press the metal clip down with the appropriate force using pliers to ensure that the metal clip is inserted into the appropriate position, and connection completed.
Packing Information
(Data base on IP20)
Precautions for use
- To protect the LED light strip, do not hit the light-emitting area with hard things.
- After unpacking, please use in 24H to avoid the oxidation effect of solder joints.
- Avoid direct contact with high temperature objects in the light-emitting area of the lamp, and the instantaneous contact temperature of the surface of the light-emitting area should be less than 210 °C.
- The soldering iron temperature should be less than 300° during soldering, and the soldering time of single solder should be controlled within 3s.
- It is strictly forbidden to twist the lamp with short distance. The single lamp strip (0.5 m) has a maximum twist angle of 720°.
- The bend diameter at any position needs to be greater than 1cm.
Web: www.ledyi.com | Mail: sales@ledyi.com
| Tel.: +86 0755 2302 5890
Copyright©2023 LEDYI LIGHTING CO., LIMITED | All Rights Reserved
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>