baby trend TJ75xxxP Jogger Travel Systems Instruction Manual
- June 12, 2024
- baby trend
Table of Contents
baby trend TJ75xxxP Jogger Travel Systems
Product Information
The product is an infant car seat with the model name EZ-Lifts 35 PLUS. It is manufactured by Baby Trend, Inc. and the company’s contact information is as follows Address: 13048 Valley Blvd. Fontana CA 92335 Phone: 1-800-328-7363 (8:00 a.m. ~ 4:30 p.m. PST)
Website: www.babytrend.com
The product comes with an instruction manual in both English and Spanish. The manual provides important safety warnings and assembly instructions.
Product Usage Instructions
Before assembling and using the product, it is important to read all the instructions in the manual. The manual should be kept for future reference. Ensure that you have all the parts listed in the manual before assembling the stroller.
- Start by assembling the stroller according to the provided instructions.
- Check that the front wheel is securely attached using the double nut locking system. Tighten if necessary.
- Attach the rear wheels by pushing them into the designated slots.
- Refer to the car seat manual for instructions on installing the.
- Always use the safety harness provided and ensure that your child is properly positioned according to the instructions to avoid serious injury.
- Never leave children unattended while using the product.
- Avoid placing hot liquids or more than 3 pounds in the parent tray to prevent burns or unstable conditions.
If any parts are missing, broken, or if you encounter any issues with the product, contact the customer service of Baby Trend, Inc. for repair or replacement parts.
WARRANTYDO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACTBABY TREND® FOR
REPLACEMENT PARTS, SERVICE AND REPAIR.
The Baby Trend® warranty covers workmanship defects within 1 year of purchase.
Any product which has been subjected to misuse, abuse, abnormal use, excessive
wear and tear, improper assembly, negligence, environmental exposure,
alteration or accident, or has had its serial number altered or removed
invalidates all claims against the manufacturer. Any damage to property during
installation is the sole responsibility of the end user. Customer Service
Department can be contacted at 1
800-328-7363 Monday
throughFridaybetween8:00 a.m. and 4:30 p.m. (PST). Return Authorizations are
required prior to returning product(s) to Baby Trend®. Please
PARTS
Check that you have all the parts for this model before assembling the stroller.
- Please refer to the manual located under the car seat for base type and instructions.
- Por favor, consultee el manual ubicate debag de la Sillito para el automobile Para conacre el typo de base y las instructions
WARNING:
Please follow all of these instructions to ensure the safety of your child.
Keep these instructions for future reference.
WARNING
Failure to follow these instructions could result in serious injury or death.
Avoid serious injury from falling or sliding out. Always use the safety
harness and ensure that the children are properly positioned according to
these instructions.
WARNING
Never leave children unattended.
WARNING
Wheel can detach and cause tip over. Pull on the wheel to ensure it is
securely attached .
CAUTION
This single jogger is designed for one child only. Use with more than one
child may cause the unbalance condition which can injure/ harm your child.
- Purses, shopping bags, parcels, diaper bags or accessory items may change the balance of the stroller and cause hazardous unstable conditions.
- The maximum weight that can be carried in the basket is 5 lbs. (2.26 kg), child tray and parent tray are 3 lbs. (1.36 kg) each. If equipped, the maximum weight can be carried in the side pockets (2) is 3 lbs. (1.36 kg), back pockets (2) is 3 lb. s (1.36 kg) and canopy pockets is (2) 1 lb. (0.45 kg). Excessive weight may cause a hazardous unstable condition to exist.
- Be certain the stroller is fully erect and latched in the open position before allowing the children near the stroller.
- Use of the stroller with children weighing more than 50 pounds (22.67 kg) or over 42 inches (106.7 cm) tall, will cause excessive wear and stress on the strolled and may cause a hazardous unstable condition to exist.
NEVER use the stroller on stairways or escalators.
NEVER use the stroller with roller skates, in-line skates, skateboards or
bicycles.
WARNING
We recommend that the child occupant be at least 6 months of age prior to use
of the stroller for jogging. Because children develop at different rates,
please discuss the use of a jogging stroller with your health care provider
prior to jogging with your child.
NEVER allow your stroller to be used as a toy.
- To clean use only mild household soap or detergent and warm water on a sponge or clean cloth.
- Check your stroller for loose screws, worn parts, torn material or stitching on a regular basis. Replace or repair parts as needed.
- Discontinue use of stroller should it malfunction or become damaged. Please contact our customer service to arrange for repair or obtain replacement parts.
ASSEMBLY MONTAJE.
IMPORTAN ensure safe operation of your product, please follow these
instructions carefully. Please keep these instructions for future reference.
IMPORTANT Before assembly and each use, inspect this product for damaged
hardware, loose joints, missing parts or sharp edges. NEVER use if any parts
are missing or broken.
IMPORTANT Adult assembly is required. Keep child away during unpacking
and assembly.
FRONT WHEEL INSTALLATION
WARNING
- Please follow all of these instructions to ensure the safety of your child. Failure to follow these instructions could result in serious injury or
- Release the fold latch (Fig. 1a). Unfold stroller frame by pulling upward on the stroller
NOTE Ensure the stroller frame is locked by pressing down on the
handle.
NOTE Ensure the stroller frame is locked by pressing down on the handle.
- Underneath the front end of the frame locate the front wheel hub (Fig. 1c). Firmly insert the front wheel into the hub until it clicks into position.
WARNING
FALL HAZARD: ALWAYS check the double nut locking system before each use to
ensure that the front wheel is securely fastened to the frame. See (Fig. 18c)
for tightening
- Lift the front of the stroller off the ground, and pull down on the wheel to make sure it is secure (Fig. 2).
NOTE The wheel must not come off.
REAR WHEELRUEDA TRASERA
- Lean the stroller forward to rest on the front wheel.
- To attach the rear wheels, Align wheel’s axle into the bushing on the stroller frame. Push wheel into the bushing until you hear a click. Repeat the process for the other wheel (Fig. 3).
- Check that each wheel is set into place by pulling on the wheel.
NEVER use the stroller if the wheels are not locked into place, contact our customer service department immediately at 1-800- 328- 7363, between the hours of 8:00am and 4:30pm PST, for assistance.
PARENT TRAY
WARNING: Do not place hot liquids or more than 3 pounds in the parent tray. Serious burns or unstable conditions could result.
To attach the parent tray insert the hole on the parent tray into the pin on the handle. Align the opposite side of the tray and press down until you hear a click. Pull up on the tray to verify proper installation. Please be careful not to pinch your fingers when installing the parent tray To remove the parent tray, pull outward on one end of the tray while lifting upward,
CANOPY
-
To open the canopy: pull forward on the front edge of the canopy while holding the rear of canopy in place (Fig. 5a).
-
To close the canopy: push backwards on the front edge towards handle (Fig. 5b)
-
To close the canopy: push backwards on the front edge towards handle (Fig. 5b). The child’s tray is not a restraint device
-
To attach the child tray: hold the tray at a 90° angle and insert into the receiving endif stroller armrest (Fig. 6a). Rotate tray downward to opposite side and snap closed (Fig. 6b)
-
To access the child seat: Press tray release button and rotate upward on the tray (Fig. 7a).
-
To remove the child tray: Press the tray release button (Fig. 7a) and orate the tray 180° and pull it out (Fig. 7b).
-
To recline the seat, press the side tabs on the adjuster and pull downward. To place the seat into the upright position, hold the strap hoop and push the adjuster upward (Fig. 8). The upright position should be used only for a child that is at least 6 months old. Always re-adjust the safety harness, including the shoulder belts, when repositioning the seatback
NFANT CAR SEAT
ATTENTION: CS01 EZ-Lift, CS02 EZ-Lift PLUS and CS03 EZ-Lift PRO Infant
Car Seats must attach to the module of the strollers front seat. These models
require child tray and seat back adjustment to the most reclined position.
NOTE: To make seat position adjustments refer to step 8
CS01 EZ-Lift, CS02 EZ-Lift PLUS and CS03 EZ-Lift PRO Infant Car Seats
- Align the car seat module to the inner frame connectors. Carefully rest the carats lower rear against the angle point of the tray. Latch the module into the stroller frame. Press down firmly for the click. ALWAYS ensure that the car seat is properly connected and locked onto the stroller before each use by lifting up on the car seat handle (Fig. 9a).
REMOVING THE CAR SEAT:
NOTE Set handle to the carry position (Fig. 9b). Squeeze the release
handle located at the Top-rear of the car seat and lift away from the stroller
(Fig. 9c).
SAFETY SEGURIDAD
BRAKES
- To engage rear brakes: push down the brake to lock (Fig. 10a).
FRONT WHEEL LOCK
WARNING: FALL HAZARD: From tip over before running, jogging, or
walking fast, lock the front wheel from swiveling.
- The front wheel is equipped with a swivel locking device. Push the button on the wheel upward to engage the locks and push downward to disengage the locking device
(Fig. 11).
NOTE Locks in two directions. Direction (1) recommended.
TO SECURE THE CHILD
WARNING: Avoid serious injury from falling or sliding out. Always use
the safety harness.
-
The shoulder straps of the 5-point harness have 3 attachment positions. Select the position that places the shoulder strap level with, or below the top of the child’ shoulder (Fig. 12a)
-
Carefully place the child in the stroller seat and bring the safety harness around the child’s waist and over the shoulders. Place the crotch strap between the child’s legs(Fig. 12b). Insert the male end of each shoulder/waist belt into the buckle on the crotch strap. Tighten the harness to be snug around the child’s waist and over the child’s
-
To release, push Red Button on Center Clasp, the two Harness Buckles will pop free (Fig. 13) central para las dos dele a(Fig. 13).14) When you are jogging with your child, use the following safety features:
JOGGING WITH YOUR STROLLER
The shoulder straps of the 5-poaint harness13)
WARNING: Never jog or run with your newborn in the car seat position. Use for strolling only
When you are jogging with your child, use the following safety features:
- LOCK THE FRONT SWIVEL WHEEL IN STRAIGHT POSITION
- THE TETHER STRAP: This strap is intended to maintain control of the stroller in case of a fall while running (Fig 14a). To use the tether strap, remove it from the handle of the stroller and attach it to your wrist as shown in (Fig. 14b)
- This strap is intended to maintain control of the stroller in case of a fall while running (Fig 14a). To use the tether strap, remove it from the handle of the stroller and attach it to your wrist as shown in (Fig. 14b).
TIRE INFLATION
- Check the tire pressure before using the stroller. Tires are shipped un-inflated. The tires should be inflated on a regular basis to the P.S.I. specified on each tire.
NOTE: Only use hand pump. DO NOT USE air compressor to inflate the tire.*Pump not included.
DO NOT INFLATE above the maximum recommended inflation pressure that is on the side of the tire.
UNFOLD
TO FOLD STROLLER
WARNING: Care must be taken when folding the stroller to prevent finger
entrapment.
- Recline seat by releasing buckle as described in seatback positioning section (Refer to Fig. 8). Close the canopy as described in the canopy section (Refer to Fig. 5b).• To fold the stroller pull each trigger release (Fig. 16a). Push down on the stroller handle until the stroller is completely folded. Secure the latch to lock as shown in(Fig. 16b).
TO UNFOLD STROLLER
WARNING: Care must be taken when unfolding the stroller to prevent
finger entrapment.
- Stand the stroller on the ground with all three wheels touching the ground. Release the folding latch, which is located on the right side (Fig. 17a)
- Lift up on the stroller handle with both hands until the stroller frame is locked in the open position (Fig. 17b).
CARE AND MAINTENANCE
DO NOT MACHINE WASH SEAT. It should only be wiped with mild soap. Do Not soak material, NO BLEACH. To clean stroller frame use only mild soap and water, NO BLEACH. Check Stroller for loose screws, worn parts, torn material or stitching’s on a regular basis. Replace or repair parts as needed.
FRONT WHEEL – MAINTENANCE
-
If replacing the front wheel, remove the wheel, axle nuts and the retainer plates (Fig. 18a). Switch the front wheel using the front forks (Fig. 18b) If replacing the front wheel, remove the wheel, axle nuts and the retainer plates (Fig. 18a). Switch the front wheel using the front forks (Fig. .18b).
-
Slide both retainer plates into the axle with the tabs inserting into the slots of the fork. Then use the axle nuts to tighten all parts securely onto the fork (Fig. 18c). Check these parts regularly and ensure to always keep the axle nuts tightened.
-
To release the entire front wheel assembly, push the front wheel release tab inward. The wheel easily detaches from the housing (Fig. 19).
-
To release the entire rear wheel assembly, push in the rear wheel release. The wheel easily detaches from the bushing (Fig. 20).
BABY TREND® CUSTOMER SERVICE
The Customer Service Department can be contacted at 1
800-328-7363 Monday through Friday
between 8:00 a.m. and 4:30 p.m. (PST). Return Authorizations are required
prior to returning product(s) to Baby Trend®.
Download the helper appRead moreCancel
x
References
- Limited Warranty Coverage – Baby Trend
- Baby Trend® | Car Seats, Strollers, High Chairs, Nursery and More!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>