LEDYi LY840-CSPRGB-W24 LED RGB Flexible CSP Strip Light Installation Guide
- June 12, 2024
- LEDYI
Table of Contents
LEDYi LY840-CSPRGB-W24 LED RGB Flexible CSP Strip Light
Part Number: LY840-CSPRGB-W24-IP20/IP20/IP65CS
Description
24V, RGB flexible COB strip (Step length: 24V=50mm), with 3M adhesive tape on the back for easy installed. RGB color, 180° beam angle.
Dimensions & Waterproof
Product Specification
| Dimension | 5000x10x2mm |
|---|---|
| Chip Type | CSP |
| Chips/m | 840pcs |
| Step LEDs | 42pcs |
| Step Length | 50mm |
| Voltage(V) | DC24V |
| --- | --- |
| Power(W/m) | 12W |
| CRI | / |
| Beam Angle | 180° |
| Operation Temperature | -20°C~50°C |
Product Photometrics (Data base on IP20)
Color
| Peak Wavelength
(nm)
| Dominant Wavelength
(nm)
| Lumen
(lm/m)
| Power
(w/m)
| Efficacy
(lm/w)
---|---|---|---|---|---
Red| 632| 620| 61| 3.6| 16.94
Green| 517| 525| 472| 4.8| 98.33
Blue| 462| 454| 55| 3.6| 15.28
Product Photometrics – All Red, Green and Blue color at 100% on (Data base on IP20)
CCT
(K)
| Lumen
(lm/m)
| Power
(w/m)
| Efficacy
(lm/w)
| ****
CRI
| ****
R9
---|---|---|---|---|---
–| 588| 12| 49| –| –
Binding
Graphic Description
- IP20: bare, max. light output and the best color consistency, indoor use.
- IP52: Silicone coating, ~5% less output and 3rd best color consistency, indoor use, for damp environments. IP65: Silicon tube / Heat shrink tube / Extrusion tube / U milky tube + clear cover, ~3% less output and 2nd best color consistency, Indoor use or semi-outdoor use, for raining environments.
- IP67: Silicone tube + silicon filling , ~7% less output and 4th best color consistency, outdoor use, max length is 10 meters.
Packing Information(Database on IP20)
Precautions for use
- To protect the LED light strip, do not hit the light-emitting area with hard things.
- After unpacking, please use in 24H to avoid the oxidation effect of solder joints.
- Avoid direct contact with high temperature objects in the light-emitting area of the lamp, and the instantaneous contact temperature of the surface of the light-emitting area should be less than 210 °C.
- The soldering iron temperature should be less than 300° during soldering, and the soldering time of single solder should be controlled within 3s.
- It is strictly forbidden to twist the lamp with short distance. The single lamp strip (0.5 m) has a maximum twist angle of 720°.
- The bend diameter at any position needs to be greater than 1cm.
CONTACT
- Web: www.ledyi.com
- Mail: sales@ledyi.com
- Tel. : +86 0755 2302 5890
Copyright©2023 LEDYI LIGHTING CO., LIMITED | All Rights Reserved