LEDYi LY840-COBRGBW-W24 LED RGBW Flexible CSP Strip Owner’s Manual
- June 12, 2024
- LEDYI
Table of Contents
LEDYi LY840-COBRGBW-W24 LED RGBW Flexible CSP Strip
Note: LEDYI may change product specifications and installation guidance without prior notice.
Part Number: LY840-COBRGBW-W24-[P20- IP20/IP65CS
Description
24V, RGBW flexible COB strip (Step length: 24V=33.3mm), with 3M adhesive tape on the back for easy installed. RGBW color, 180° beam angle.
Dimensions & Waterproof
Product Specification
| Dimension | 5000x12x2mm |
|---|---|
| Chip Type | CSP |
| Chips/m | 840pcs |
| Step LEDs | 28pcs |
| Step Length | 33.3mm |
| Voltage(V) | DC24V |
| --- | --- |
| Power(W/m) | 20W |
| CRI | >90 |
| Beam Angle | 180° |
| Operation Temperature | -20°C~50°C |
Product Photometrics (Data base on IP20 CRI >90)
Color
| Peak Wavelength
(nm)
| Dominant Wavelength
(nm)
| Lumen
(lm/m)
| Power
(w/m)
| Efficacy
(lm/w)
---|---|---|---|---|---
Red| 628.5| 620.3| 130| 5| 26
Green| 518.0| 523.7| 300| 5| 60
Blue| 462.9| 467.1| 70| 5| 14
2700K| /| /| 400| 5| 80
RGB+2700K| /| /| 860| 20| 43
Bining
- IP20: bare, max. light output and the best color consistency, indoor use.
- IP65: Silicon tube / Heat shrink tube / Extrusion tube / U milky tube + clear cover, ~3% less output and 2nd best color consistency, Indoor use or semi-outdoor use, for raining environments.
Packing Information(Data base on IP20)
Precautions for use
- To protect the LED light strip, do not hit the light-emitting area with hard things.
- After unpacking, please use in 24H to avoid the oxidation effect of solder joints.
- Avoid direct contact with high temperature objects in the light-emitting area of the lamp, and the instantaneous contact temperature of the surface of the light-emitting area should be less than 210 °C.
- The soldering iron temperature should be less than 300° during soldering, and the soldering time of single solder should be controlled within 3s.
- It is strictly forbidden to twist the lamp with short distance. The single lamp strip (0.5 m) has a maximum twist angle of 720°.
- The bend diameter at any position needs to be greater than 1cm.
- Web: www.ledyi.com
- Mail: [email protected]
- Tel.: +86 0755 2302 5890 Copyright©2023 LEDYI LIGHTING CO., LIMITED
- All Rights Reserved
Read User Manual Online (PDF format)
Loading......