LOREX W462AQC Series 2K Pan-Tilt Indoor Wi-Fi Camera User Guide
- June 12, 2024
- Lorex
Table of Contents
LOREX W462AQC Series 2K Pan-Tilt Indoor Wi-Fi Camera
Product Information
The HD Wi-Fi Camera is a surveillance camera designed for indoor use. It comes with various accessories for installation and is compatible with the Lorex Home app for remote monitoring.
What’s included:
- Camera
- USB power adapter
- USB power cable
- Mounting tape
- Mounting bracket
- Anchors & screws (x3)
Camera Overview:
- A. Status indicator
- B. Microphone
- C. Device QR code
- D. microSD slot
- E. Reset button
- F. Speaker
- G. Ethernet port
- H. Power port
Status Indicator:
- Solid green: Operating correctly. Ready for connection.
- Flashing green: Attempting connection.
- Rapidly flashing green: Firmware update in progress.
- Solid red: Device malfunction. Press and hold the reset button.
- Flashing red: Network connection failed. Press and hold the reset button.
- Rapidly flashing red: microSD error. Remove or re-insert the microSD card, or use a different card.
- Flashing red and green: Firmware update in progress.
Lorex Home App Overview:
- Camera’s live view
- Two-way talk
- Take a snapshot
- Go on Privacy Mode to disable the camera’s live view
- Shared users
- Settings
- Date & time
- Play back recorded videos
- Manually record video
- Pan-Tilt-Zoom controls
- Pause or restart video
- Viewing modes
- Video quality SD or HD
- Mute or unmute audio
- Full screen
Product Usage Instructions
-
Step One: Connect to the app
-
Scan the QR code on this page to download the free Lorex Home
app from the App Store or Google Play Store. -
Open the Lorex Home app.
-
Sign in or sign up and create an account.
-
Connect the USB power adapter to the camera and plug it into an
outlet. -
Once the status indicator on the camera is flashing green and
the startup chime sounds, tap the + icon to add your camera. -
Scan the device QR code. If your mobile device cannot scan the
QR code, tap Manually enter Device ID. -
Follow the in-app instructions to complete the setup.
-
Step Two: Place or mount the camera
-
You can place the camera on a flat surface or follow the
instructions below to mount it to an indoor ceiling. -
Use the mounting template to mark two holes for screws.
-
Drill the holes using a 1/4 (6mm) drill bit. If mounting to
masonry or drywall, gently tap the anchors into the holes. -
Align the flat side of the mounting plate with the drilled
holes. -
Use a Phillips screwdriver and two screws to secure the
mounting plate to the mounting surface. -
Twist the camera’s base clockwise onto the mounting plate.
-
Open the camera’s settings on the app and enable Image Rotation
to flip the camera image.
Note: It is recommended to install the camera away from devices like microwaves, TVs, cordless phones, and baby monitors to avoid signal interference.
FCC Compliance:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Safety precautions
- Read this guide carefully and keep it for future reference.
- Follow all instructions for safe use and handling of the product.
- Use camera within given temperature, humidity & voltage levels noted in the camera’s specifications.
- Do not disassemble the camera.
- Do not point the camera directly at the sun or a source of intense light.
- Periodic cleaning required. Use a damp cloth only. Do not use any harsh, chemical-based cleaners.
Disclaimers
- The camera is rated for indoor use only. Do not mount the camera outdoors.
- This camera includes an Auto Mechanical IR Cut Filter. When the camera changes between
- Day/Night viewing modes, an audible clicking noise may be heard from the camera. This clicking is normal, and indicates that the camera filter is working.
- Audio recording without consent is illegal in certain jurisdictions. Lorex Corporation assumes no liability for use of its products that does not conform with local laws.
What’s included
ATTENTION: A REGULATED UL / CSA APPROVED power supply is REQUIRED for use with this camera (included). Use of a non-regulated, non-conforming power supply can damage this product and voids the warranty.
Camera overview
- A. Status indicator
- B. Microphone
- C. Device QR code
- D. microSD slot
- E. Reset button
- F. Speaker
- G. Ethernet port
- H. Power port
Dimensions
- Height: 4.2” (107mm)
- Width: 3.4” (86mm)
Status indicator
Step One: Connect to the app
- Scan the QR code on this page to download the free Lorex Home app from the App Store or Google Play Store.
- Open the Lorex Home app.
- Sign in or sign up and create an account.
- Connect the USB power adapter to the camera and plug into an outlet.
- Once the status indicator on the camera is flashing green and the startup chime sounds, tap the + icon to add your camera.
- Scan the device QR code. If your mobile device cannot scan the QR code, tap Manually enter Device ID.
- Follow the in-app instructions to complete the setup.
Camera placement
- Place the camera as close to your Wi-Fi router or access point as possible.
- Reduce the number of obstructive materials between the camera and the router or access point. Concrete, brick, metal and wood are the most common materials in your house that can cause poor signal strength.
- Other electronic devices such as microwaves, TVs, cordless phones, and baby monitors can cause signal interference. It is recommended to install the camera as far away from these devices as possible.
Step Two: Place or mount the camera
- You can place the camera on a flat surface or follow the instructions below to mount it to an indoor ceiling.
- Use the mounting template to mark two holes for screws.
- Drill the holes using a 1/4” (6mm) drill bit. If mounting to masonry or drywall, gently tap the anchors into the holes.
- Align the flat side of the mounting plate with the drilled holes.
- Use a Phillips screwdriver and two screws to secure the mounting plate to the mounting surface.
- Twist the camera’s base clockwise onto the mounting plate.
- Open the camera’s settings on the app and enable Image Rotation to flip the camera image.
Lorex Home app overview
- For a complete overview of controls available in the Lorex Home app, go to lorex.com.
- Tip: Change the video quality to SD (Standard Definition) to conserve bandwidth while watching live video.
- This will not impact the quality of recorded video.
Copyright © 2021 Lorex Corporation
FCC
As our products are subject to continuous improvement, Lorex reserves the
right to modify product design, specifications and prices, without notice and
without incurring any obligation. E&OE. All rights reserved.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference,
- This device must accept any interference received, including interference that may cause undesired operation.
For up-to-date information and support, please visit:
help.lorex.com
Please see our full Terms of Service and Limited Hardware Warranty Policy at
lorex.com/warranty
Documents / Resources
|
LOREX W462AQC Series 2K Pan-Tilt Indoor Wi-Fi
Camera
[pdf] User Guide
393W462AQC, W462AQC Series, W462AQC Series 2K Pan-Tilt Indoor Wi-Fi Camera, 2K
Pan-Tilt Indoor Wi-Fi Camera, Pan-Tilt Indoor Wi-Fi Camera, Indoor Wi-Fi
Camera, Wi-Fi Camera, Camera
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>