LOREX W881AA Series 4K Spotlight WiFi Camera Instructions
- June 12, 2024
- Lorex
Table of Contents
LOREX W881AA Series 4K Spotlight WiFi Camera
Product Information
- Product Name: W881AA Series
- Components Included:
- Wall Mounting Bracket (x1)
- Mounting Plate (x1)
- Power Adapter (x1)
- Mounting Template (x1)
- Tarjeta de memoria
- Llave inglesa
- Anchors & Screws (x8)
- Features:
- IR Light
- Microphone
- Warning Light
- Smart Security Light/Status Indicator
- MicroSD Card Slot
- Speaker
- QR Code
- Website: help.lorex.com
Product Usage Instructions
- Start by unpacking the contents of the package.
- Locate the desired area for wall mounting and use the provided mounting template to mark the positions for drilling.
- Using the anchors and screws, securely mount the Wall Mounting Bracket to the wall.
- Attach the Mounting Plate to the Wall Mounting Bracket using the provided screws.
- Insert the MicroSD card into the MicroSD Card Slot.
- Connect the Power Adapter to the device and plug it into a power outlet.
- Ensure that the IR Light, Microphone, Warning Light, Smart Security Light/Status Indicator, and Speaker are all functioning correctly.
- Refer to the QR Code for additional setup instructions or troubleshooting.
- For any further assistance or troubleshooting, please visit
help.lorex.com.
Please see our full Terms of Service and Limited Hardware Warranty Policy at lorex.com/pages/warranty.
Model: W881AA_QSG_TRILINGUAL_R1
Package Contents
Note: Based on 1 camera
- 4K Spotlight Wi-Fi Camera (x1)
- Wall Mounting Bracket (x1)
- Mounting Plate (x1)
- Power Adapter (x1)
- Power Adapter (x1)
- MicroSD Card (x1)
- Wrench (x1)
- Anchors & Screws (x8)
- Cable Clips (x4)
Tools Needed
- Drill
- Screwdriver
Overview
- IR Light
- Microphone
- Warning Light
- Smart Security Light/Status Indicator
- Power Cable
- Reset Button
- MicroSD Card Slot
- Speaker
- Threaded Insert
- QR Code
Status Indicator
| Operating correctly.
---|---
| Ready for network connection.
| Device malfunction. Mauvais fonctionnement.
| Network connection failed.*
| A firmware update is in progress.
Press and hold the reset button until you hear the audio prompt.
Setup
- Download
- Connect the power cable to the power adapter. Plug the power adapter to a wall outlet.
- Tap + in the app to add the device, then follow the in-app instructions to complete the setup.
Remove the camera lens protective film when installation is complete.
Need help?
For up-to-date information and resources, scan the QR code or visit:
- Download product guides
- Find related troubleshooting tips & FAQs
- Watch how-to-videos
Register your product
Please see our full Terms of Service and Limited Hardware Warranty Policy at: lorex.com/pages/warranty
Copyright © 2022 Lorex Technology Inc
As our products are subject to continuous improvement, Lorex reserves the
right to modify product design, specifications and prices, without notice and
without incurring any obligation. E&OE. All rights reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>