MONOPRICE 44836 3In1 Wireless Charging Stand User Manual
- June 12, 2024
- Monoprice
Table of Contents
MONOPRICE 44836 3In1 Wireless Charging Stand User Manual
Monoprice™
3-in-1 Wireless Charging Stand Bundle, With Detachable Watch Charger
P/N 44836
User Manual
Product Introduction
This 3-in-1 wireless charger is a compact charging cradle that can wirelessly charge three devices with just one wireless charger, starting with your mobile phone, watch, headphones, or other devices that support wireless charging. As long as it is placed on the corresponding charging area, it can automatically wirelessly charge, which can make your desktop cleaner and more convenient to charge. This product is designed to be very space-saving and can help you integrate your electronics seamlessly. The watch charger is removable and can be used alone to charge your watch safely. Adapting to the power, the charging efficiency is greatly increased.
Usage Steps
- Please connect this wireless charger to the 5V3A, 9V/3A adapter through the Type-c fast charging cable and connect to the source
- Put your phone in the phone charging area to charge the phone
- Put your watch in the watch charging area to charge the watch
- Put your wireless charging Bluetooth headset box in the headphone charging area to charge the headset box
Package Contents
1x Wireless Charger
1x Data Cable
1x Instruction Manual
Light Mode
Basic Specifications
Name: 3-in-1 wireless charger
Size: 122.572124mm
Material: ABS+PC+Aluminum alloy
Input: 5V/3A(Max) 9V/3A(Max)
Output (mobile): 5W/7.5W/10W/15W(Max)
Output (headphones): 5W(Max)
Output (watch): 2.5W(Max)
Transmission distance: ≤5mm
Conversion rate: Slow Charge ≥70% Fast Charge ≥75%
Please check whether the phone supports wireless charging. This product supports fast wireless charging function and complies with QI wireless charging standards; By magnetic induction enables short-range wireless power transfer.
When using an adapter with 5V/2A output, the wireless charger supports 5W
load.
Wireless charger supports 15W load when using QC3.0 compliant adapters;
*To ensure the normal use of the charger, it is recommended to use PD fast charging or QC3.0 compliant adapters.
Precautions
- Do not put metal debris or magnetic cards on the charging plate, which may cause the charger to heat up.
- Foreign objects should be removed immediately.
- Slight heat is normal, and the mobile phone battery will heat up during charging.
- Do not place the charger near the source of fire or corrosive environments.
Notice for FCC
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Modifying the equipment without Monoprice’s authorization may result in the equipment no longer complying with FCC requirements for Class B digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct any interference to radio or television communications at your own expense.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
Radio Notice for FCC
Caution
This FCC Part 15 radio device operates on a non-interference basis with other
devices operating at this frequency.
Any changes or modification to said product not expressly approved by
Monoprice, including the use of non-approved antennas, could void the user’s
authority to operate this device.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
Notice for ISED Canada
This Class B digital apparatus complies with Canadian ICES-003.
Radio Notice for ISED Canada:
This device complies with ISED Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements.
www. monoprice.com
Need Help? We’re here for you!
Contact us: www.monoprice.com/contactus
Product pictures are for reference only.
Specifications described herein are subject to change without prior
notification. Monoprice™ and all Monoprice logos are trademarks of Monoprice
Inc.
Copyright © 2023 Monoprice, Inc. All rights reserved
Monoprice, Inc.
1 Pointe Drive, Suite 400
Brea, CA 92821 – USA
www. monoprice.com
Tel. 877.271.2592
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>