V-TAC VT-15035ST LED Street Light Instruction Manual

V-TAC VT-15035ST LED Street Light

INTRODUCTION & WARRANTY

Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully
before starting the installation and keep this manual handy for future reference. If you have any another query, please
contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at
the best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by
incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to
incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product
for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.

• This marking indicates that this product should not be disposed of with other household wastes.

• Caution, risk of electric shock.

WARNING!

• Please make sure to turn o± the power before starting the installation.

• The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.

• If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.

• Replace any cracked protective shield.

• Minimum distance from lighted objects 1m.

• Proper grounding should be ensured throughout the installation.

• Please read through all following instructions before installing the unit.

• User should prepare all the necessary accessories and spare parts
  (Spare parts not provided) including junction box.

• The raised lighting must be connected to the earth ground.

• Installation must be performed by a qualified electrician.

• Strictly follow these instructions for installing, avoid the intensity of power cable during installing.

• While connecting to the pole, make sure the screw torque is less than 10.5 N.m

• The input and the output connection mode must need IP65 waterproof connector to connect (suitable for line 0.75MM square – 1.5MM square)

  • Non-replaceable light source

  • Non-replaceable control gear

TECHNICAL SPECIFICATIONS

LUMENS

@WIDE CONE

| 2510Lm| 4270Lm| 8700Lm
CRI| ≥70
DF| ≥0.9
BEAM ANGLE| 110°
OPERATION

TEMPERATURE

| -20°C to +40°C
MAXIMUM PROJECTED AREA| 20-30㎡| 20-30㎡| 30-40㎡
LIFE SPAN| 25000 Hours| 25000 Hours| 25000 Hours
LxWxH (mm)| 266x129x37mm| 306x150x37mm| 437x200x40mm
N,W| 0.62kg| 0.73kg| 1.25kg
MOUNTING HEIGHT| 3-5m| 3-5m| 5-8m
MOUNTING DIAMETER| Ф45MM| Ф45MM| Ф60MM
WIRE LENGTH (OUTER SIZE)| 160mm±10mm| 160mm±10mm| 240mm±10mm
SURGE PROTECTION GRADE| Level 3
INPUT VOLTAGE| AC:220-240V ,50/60Hz

INSTALLATION & WIRING DIAGRAM

INSTALLATION INSTRUCTION

1. Switch OFF power before starting installation
2. Connect supply wires to luminare as displayed in the wiring diagram.
3. Use M8 screws to fix the hoop and lamp on the pole and lock it tight.
4. Turn ON the power to Test

IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU
FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS.
V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B

References

• TAC.EU
• ear-system.de/ear-verzeichnis/sammel-und-ruecknahmestellen

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>