V-TAC VT-1148 Solar LED Wall Light with Sensor Instruction Manual

V-TAC VT-1148 Solar LED Wall Light with Sensor

Product Information

• Product Name: Solar LED Wall Light with Sensor
• Model: VT-1148
• SKU: 23017
• Lumens: 100 Lm
• Solar Panel Battery: DC 5.5V, 0.8W Polycrystalline
• Battery: 2000mAh, Li-Ion, DC: 3.7V
• Charging Time: 8-10 Hours
• Working Time: 6-8 Hours
• Bulb Watts: 2.5 W
• Color Temperature: 3000K
• Sensor Type: Not specified
• Sensor Degree: Not specified
• Dimension: Not specified
• Material: Not specified

Product Usage Instructions

1. Make sure to turn off the power before starting the installation.
2. Have a certified electrician perform the installation.
3. To install the light, follow these steps:
   • Drill two holes in the wall and insert two plastic expansion bolts in them.
   • Fix the plastic plate on the plastic expansion pieces with self-tapping screws.
   • Fix the lamp body on the plate and tighten the screws.
   • Switch on the power and test the light.
4. The sensor has the following functions:
   • Long press for 3 seconds to start (turn on) low light at 10% brightness.
   • The light turns on at 100% brightness when motion is detected and switches to 10% brightness when people go away.
   • The light turns on at 100% brightness when motion is detected and turns off when no one comes in.
   • Turn off the light.

Maintenance & Warning
To ensure the proper functioning of the product and for your safety, please adhere to the following guidelines:

• Refer to the instruction manual for maintenance guidelines.
• Do not dispose of the product with other household waste.
• For any queries or issues with the product, contact support@v-tac.eu
• For more product range and inquiries, contact your nearest distributor or dealer: V-TAC EUROPE LTD., Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B

TECHNICAL DATA

MODEL| VT-1148|  |  |  |
---|---|---|---|---|---
SKU| 23017|  | ****

BULB WATTS

| ****

2.5 W

|
LUMENS| 100 Lm
 | COLOR TEMPERATURE|  |
SOLAR PANEL| DC 5.5V, 0.8W

Polycrystalline

| 3000K|
 |  | SENSOR TYPE| PIR Sensor|
 | 2000mAh, Li-Ion,

DC: 3.7V

BATTERY|  | SENSOR DEGREE| 90-110°|
CHARGING TIME| 8-10 Hours|  | DIMENSION| 91x181x66mm|
WORKING TIME| 6-8 Hours|  | MATERIAL| Aluminium+Glass|

INTRODUCTION & WARRANTY

Thank you for selecting and buying the V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any other queries, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at your best. The warranty is valid for 3 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of the product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.

MULTI-LANGUAGE MANUAL QR CODE
Please scan the QR code to access the manual in multiple languages.

In case of any query/issue with the product, please reach out to us at: support@v-tac.eu For More product ranges, inquiry please contact our distributor or nearest dealers. V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B

WARNING

1. Please make sure to turn off the power before starting the installation.
2. Installation should be done by a certified electrician

This marking indicates that this product should not be disposed of with other household wastes.

INSTALLATION DIAGRAM

INSTALLATION INSTRUCTION

1. Drill two holes in the wall and insert two plastic expansion bolts in it.
2. Fix the plastic plate on the plastic expansion piece with self-tapping screws.
3. Fix the lamp body on the plate and tighten the screws.
4. Switch on and test.

FUNCTION OF SENSOR

1. Long press 3s start (turn on) low light 10%
2. Turns 100% brightness when motion is detected and 10% light when people go away
3. Turns 100% brightness when motion is detected and the light turns off when no one comes in.
4. Turn off.

MAINTENANCE & WARNING

• Do not use solvents, petrol, etc. Otherwise, the light will be damaged.
• Clean the light with a dry, lint-free cloth.
• Check the solar panel for dirt regularly. If dirt is present remove it to guarantee flawless function of the product.
• Especially during the winter, keep the product free from snow and ice.
• Confirm installation direction is correct (solar panel should be at the top)
• Confirm no objects blocking the solar panel to receive sunlight
• Keep away from the fire.
• Don’t immerse in the water

References

• tac.eu

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>