V-TAC VT-1253 Led Waterproof Fitting Instruction Manual
- June 12, 2024
- V TAC
Table of Contents
V-TAC VT-1253 Led Waterproof Fitting
Product Information
The LED Waterproof Fitting is a high-quality lighting fixture designed for indoor use. It is suitable for installation in areas where moisture and water resistance is required. The fitting is available in two models: VT-1253 and VT-1254, each with different specifications and dimensions. The product comes with a warranty and is manufactured by V-TAC EUROPE LTD.
Technical Data
Model| SKU| Watts| Lumens| CRI| DF| Beam Angle| Input Power| Material|
Dimension| Max Connectable Units
---|---|---|---|---|---|---|---|---|---|---
VT-1253| 10220 10221| 36W| 4320 Lm| 80| 0.9| 1200x64x60mm| 10 pcs
VT-1254| 10222 10223| 48W| 5760 Lm| 80| 0.9| 1500x64x60mm| 8 pcs
Introduction & Warranty
Before starting the installation, please ensure that the power is turned off. The installation of the LED Waterproof Fitting should be performed by a qualified electrician. The light source of this luminaire is not replaceable and the entire luminaire should be replaced when the light source reaches its end of life. If the external flexible cable or cord of this luminaire is damaged, it should be replaced by the manufacturer, their service agent, or a qualified person to avoid hazards. For any queries or issues with the product, please contact V-TAC EUROPE LTD at support@v-tac.eu. For a wider range of products and inquiries, please reach out to our distributor or nearest dealers. The product manual is available in multiple languages. Scan the provided QR code to access it. This product should not be disposed of with other household wastes. Please follow proper disposal guidelines.
Installation Instructions
Take the 2 pcs stainless steel brackets from the accessories bag and fix
them onto the ceiling using the provided screws and expansion tubes.
- Using a screwdriver, open the junction box cover of the body.
- Fasten the waterproof connector clockwise. Insert the cable through the waterproof connector and wire it into the terminal block. Ensure that L (LIVE) is connected to the brown wire and N (NEUTRAL) is connected to the blue wire.
- Cover back the junction box cover and install the lamp to the ceiling clips.
- If a hanging installation type is desired, suspension clips need to be purchased separately.
INSTRUCTION MANUAL
LED WATERPROOF FITTING
TECHNICAL DATA
MODEL| SKU| WATTS| LUMENS| CRI| DF| BEAM ANGLE| INPUT POWER| MATERIAL|
DIMENSION| MAX
CONNECTABLE
UNITS
---|---|---|---|---|---|---|---|---|---|---
VT-1253| 10220
10221| 36W| 4320 Lm| ≥80| ≥0.9| 120°| AC:220-240V, 50/60 Hz| PC+ABS|
1200x64x60mm| 10 pcs
VT-1254| 10222
10223| 48W| 5760 Lm| ≥80| ≥0.9| 120°| AC:220-240V, 50/60 Hz| PC+ABS|
1500x64x60mm| 8 pcs
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
WARNING
- Please make sure to turn off the power before starting the installation.
- Installation must be performed by a qualified electrician.
- The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
MULTI-LANGUAGE MANUAL QR CODE Please scan the QR code
to access the manual in multiple languages.
This marking indicates that this product should not be disposed of with other
household wastes.
Caution, risk of electric shock.
INSTALLATION INSTRUCTION
-
Take the 2 pcs stainless steel brackets out from accessories bag, fix them onto the ceiling by offered screws and expansion tubes.
MODEL L1 -
VT-1253 790±30mm
-
VT-1254 1090±30mm
-
Open junction box cover of the body with screwdriver.
-
Fasten the waterproof connector clockwise. Insert cable through the waterproof connector and wire it into terminal block. Make sure L and N are wired to correct holes.
(LIVE = BROWN; NEUTRAL = BLUE). -
Cover back to junction box cover ,install the lamp to the ceiling clips.
-
Hanging installation type reference. (Suspension clips need to be purchased separately)
In case of any query/issue with the product, please reach out to us at:
support@v-tac.eu For More products range, inquiry
please contact our distributor or nearest dealers.
V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>